Abstract:5-Hydroxymethylfurfural (5-HMF) is a value-added platform chemical, which can be obtained from pyrolysis of biomass materials, whereas related investigation on its selective production via catalytic fast pyrolysis (CFP) process is still insufficient. In this work, a zirconium-tin mixed metal oxide (ZrO2-SnO2) catalyst was developed for the selective production of 5-HMF from the in-situ CFP of cellulose. According to pyrolysis-chromatography/mass spectrometry (Py-GC/MS) tests, the ZrO2-SnO2 catalyst has better performance on the selective preparation of 5-HMF than single nano oxide ZrO2, SnO2, or their physical mixture. 5-HMF was sensitive to the reaction conditions, and its yield and selectivity always exhibited the tide of first increasing followed by decreasing along with the increase of Zr loading and catalyst-to-cellulose (CA-to-CL) ratio. At the optimum conditions with ZrO2-SnO2 of 15 wt% Zr loading (ZrO2-SnO2-15), pyrolysis temperature of 350 °C and CA-to-CL ratio of 2:1, the 5-HMF yield was 6.49 wt%, which was 4 times more than that of the non-catalytic process (1.35 wt%). Correspondingly, the selectivity of 5-HMF was up to 23.50 %. The catalyst characterization combined with the pyrolysis texts of several typical saccharides, including cellobiose, maltose, glucose, and mannose indicated that the ZrO2-SnO2-15 could promote the breakage of glycosidic bonds with the formation of reducing ends and the selective conversion of the reducing end to 5-HMF due to its mild acidity. Overall, the ZrO2-SnO2 is expected a promising catalyst for the CFP of cellulose to prepare 5-HMF.

Efficient Preparation of 5-Hydroxymethylfurfural from Cellulose Via One-Step Combination of Mechanical and Chemical Pre-Treatment

Green Synthesis of Cellulose Formate and Its Efficient Conversion into 5-Hydroxymethylfurfural

Mechanistic Investigation of Cellulose Formate to 5-Hydroxymethylfurfural Conversion in DMSO-H2O

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

One-pot Conversion of Cellulose to HMF under Mild Conditions Through Decrystallization and Dehydration in Dimethyl Sulfoxide/tetraethylammonium Chloride

Efficient One-Pot Production of 5-Hydroxymethylfurfural from Glucose in an Acetone–Water Solvent

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Efficient Conversion of Chitin into 5-Hydroxymethylfurfural Via a Simple Formylation Step under Mild Conditions

Conversion of glucose to 5-hydroxymethyl furfural in water-acetonitrile-dimethyl sulfoxide solvent with aluminum on activated carbon and maleic acid

Corn Stover Valorization by One-Step Formic Acid Fractionation and Formylation for 5-Hydroxymethylfurfural and High Guaiacyl Lignin Production.

Mechanistic Understanding of Humin Formation in the Conversion of Glucose and Fructose to 5-Hydroxymethylfurfural in [bmim]cl Ionic Liquid.

A novel strategy for highly efficient conversion of cellulose into 5-hydroxymethylfurfural using green and effective stepwise catalytic systems

Roles of Ball Milling Pretreatment and Titanyl Sulfate in the Synthesis of 5-Hydroxymethylfurfural from Cellulose

Selective preparation of 5-hydroxymethylfurfural by catalytic fast pyrolysis of cellulose over zirconium-tin mixed metal oxides

One-pot Conversion of Biomass-Derived Carbohydrates into 5-[(Formyloxy)methyl]furfural: A Novel Alternative Platform Chemical

Catalytic Conversion of Cellulose to 5‐Hydroxymethylfurfural: Advancements in Heterogeneous Catalysts and Cutting‐Edge Hydrolysis Strategies

Sustainable Approaches to Selective Conversion of Cellulose Into 5-Hydroxymethylfurfural Promoted by Heterogeneous Acid Catalysts: A Review

Acid-Free Conversion of Cellulose to 5-(Hydroxymethyl)furfural Catalyzed by Hot Seawater

One-pot Direct Conversion of Passion Fruit Hull into 5‑hydroxymethylfurfural Catalysed by Halogenated Metal Ionic Liquids and Organic Acids

Efficient conversion of cellulose to 5-hydroxymethylfurfural using a bifunctional hydrophobic SBA-15 catalyst: The effects of hydrophobicity, morphology and acidity

Production of 5-Hydroxymethylfurfural from Hydrolysate of pretreated lignocellulosic biomass in a biphasic system reactor