Abstract:Polyoxometalate (POM) as an "electronic sponge" can store a great number of electrons; however, shortcomings of poor conductivity and solubility in electrolytes cause a significant decrease in specific capacity and poor rate capability. To address the aforementioned disadvantages, a dual strategy was proposed, including coating the conductive polypyrrole (PPy) and utilizing nitrogenous ligands (1,10-phenanthroline monohydrate = 1,10-phen) for metal–organic frameworks (MOFs) to fabricate a [Cu(1,10-phen)(H2O)2]2[Mo6O20]@PPy () composite, effectively confining the POM in MOFs to avoid dissolution of POM in the electrolyte and improve electrochemical stability. Simultaneously, the PPy shell could improve the conductivity, contribute extra capacity, and alleviate volume variation of Cu-POMOF during cycling. Therefore, the final composite provides an excellent specific capacity of around 769 mA h g–1 at 0.1 A g–1 after 160 cycles and good rate performance, associated with great cycling stability (319 mA h g–1 at 2 A g–1 after 500 cycles). Moreover, the electrochemical reaction mechanism of was investigated by ex situ XPS measurements, indicating that storage of electrons results from the reduction/oxidation of Mo atoms (Mo6+ ↔ Mo4+) and Cu atoms (Cu2+ ↔ Cu0). As a consequence, this work not only proposes a novel method for preparing POM-based lithium-ion batteries but also expands the variety of anode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20721?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20721</a>.Raman spectra of Cu-POMOF, PPy, and ; N2 adsorption–desorption isotherms of ; higher magnification TEM of ; TGA curves of Cu-POMOF and ; EDS spectrum and element content of ; high-resolution XPS spectra of Cu 2p; cycling properties at 2 A g–1 of and Cu-POMOF-2; cycling properties at 1 A g–1 of PPy; SEM image of and Cu-POMOF after 100 cycles; TEM image of the after 100 cycles; CV curves of Cu-POMOF at 0.2 mV s–1; and comparison of and other POMOF-based anodes in this work and other literature (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20721/suppl_file/am0c20721_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polypyrrole/Al2O3/LiMn2O4 cathode for enhanced storage of Li ions

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Polypyrrole coated δ-MnO 2 nanosheet arrays as a highly stable lithium-ion-storage anode.

Polypyrrole coated δ-MnO2 nanosheet arrays as a highly stable lithium-ion-storage anode

AlPO4-Li3PO4 Dual Shell for Enhancing Interfacial Stability of Co-free Li-rich Mn-based Cathode

Establishment of PPy-derived carbon encapsulated LiMn2O4 film electrode and its performance for efficient Li+ electrosorption

Superior Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode with the Stable Polypyrrole Coating and Boron Doping for Li-Ion Batteries

Polypyrrole-coated sodium manganate microspheres cathode for superior performance Sodium-ion batteries

Boosting sodium storage performance of Na0.44MnO2 through surface modification with conductive polymer PPy utilizing sonication-assisted dispersion

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Controlled preparation of nano-Al2O3/PPy composite coatings to compensate surface structural defects of lithium-rich layered oxides

Design of pseudocapacitance and amorphization Co-enhanced Mn3O4/graphene sheets nanocomposites for high-performance lithium storage

Positive Surface Pseudocapacitive Behavior-Induced Fast and Large Li-ion Storage in Mesoporous LiMnPO4 @C Nanofibers.

PPy@h-MoO3 nanorods as cathode material for high-efficiency lithium-ion batteries

Mixed Molybdenum Oxides with Superior Performances As an Advanced Anode Material for Lithium-Ion Batteries

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

Construction of the POMOF@Polypyrrole Composite with Enhanced Ion Diffusion and Capacitive Contribution for High-Performance Lithium-Ion Batteries

Electrochemically Fabricated Polypyrrole-Cobalt-Oxygen Coordination Complex As High-Performance Lithium-Storage Materials

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries