Abstract:Ultra-high performance concrete (UHPC) is characterized by its ultra-high strength and durability, making it suitable for use in large-span bridges, super high-rise buildings, and other special structures. These types of structures often have high requirements for crack control, making the exploration of UHPC's fracture mechanics properties of significant importance. Therefore, this paper sets up four steel fiber contents (0%, 0.6%, 1.2% and 1.8%) and four strain rates (10-5/s, 10-4/s, 10-3/s and 10-2/s), totaling 16 working conditions. The hydraulic servo system combined with digital image correlation (DIC) technology was used to conduct fracture mechanics tests on UHPC three-point bending beams. The test results show that the unstable fracture load of UHPC increases with the increase of strain rate and steel fiber content, and increasing the steel fiber content can enhance the strain rate effect of UHPC to a certain extent. Additionally, combined with the J-criterion model, this study proposed a dynamic criterion for the unstable fracture load of UHPC considering the influence of steel fiber content. The initial fracture toughness, unstable fracture toughness, and fracture energy of UHPC are significantly more affected by steel fiber content than by strain rate. Through DIC technology, the analysis of UHPC crack propagation shows that UHPC without steel fibers experiences rapid crack expansion in the Pre-90% to Peak stage, with less influence from the strain rate. However, UHPC with steel fibers exhibits a more uniform crack growth rate, with the crack emergence phase gradually lagging as the strain rate increases. For UHPC without steel fibers, the crack opening displacement (COD) at the unstable fracture load point surges suddenly, while the COD development in UHPC with steel fibers is slower. At lower strain rates, an increase in steel fiber content leads to an earlier sudden increase phase in UHPC's COD; at higher strain rates, the influence of steel fiber content on the sudden increase phase of UHPC's COD is more scattered. The research results of this paper provide a theoretical basis for the calculation and analysis of the dynamic response of UHPC structures under seismic loads.

Automatic Detection and Assessment of Crack Development in Ultra-High Performance Concrete in the Spatial and Fourier Domains

Crack detection in ultrahigh-performance concrete using robust principal component analysis and characteristic evaluation in the frequency domain

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

A Three-Step Computer Vision-Based Framework for Concrete Crack Detection and Dimensions Identification

Experimental characterization on fracture behavior of UHPMC under small-scale sample tensile testing: Acoustic emission monitoring and digital image correlation

Quantifying the sequential fine cracks of strain-hardening cementitious composites (SHCC): An automatic approach for temporal and spatial assessment

Fracture mode classification of UHPC based on deep learning and wavelet time–frequency spectrum derived from acoustic emission waveform

New graphic method for quantitatively analyzing characteristic parameters of concrete cracks

Automated crack assessment and quantitative growth monitoring

Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique

A New Graphical Quantitative Evaluation Method of Concrete Cracks Based on Digital Image Technology and Fractal Theory

Theoretical and Experimental Research of Ultra-High-Performance Concrete Tensile Behaviour Based on Micro-Analysis

Methodology for Quantifying Features of Early-Age Concrete Cracking from Laser Scanned 3D Data

Application of the J-Integral and Digital Image Correlation (DIC) to Determination of Multiple Crack Propagation Law of UHPC under Flexural Cyclic Loading

Study on the Dynamic Fracture Mechanical Properties of Ultra High-Performance Concrete under the Influence of Steel Fiber Content

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Investigation of stress-wave-induced crack penetration behavior at the rock-Ultra-High-Performance Concrete (UHPC) interface

3D cohesive fracture of heterogeneous CA-UHPC: A mesoscale investigation

Deep Learning-Based Crack Monitoring for Ultra-High Performance Concrete (UHPC)

Imaging of vertical surface-breaking cracks in concrete members using ultrasonic shear wave tomography

Analysis of the flexural properties of ultra-high-performance concrete consisting of hybrid straight steel fibers