Abstract:The wicking phenomenon, including wicking and hemiwicking, has attracted increasing attention for its critical importance to a wide range of engineering applications, such as thermal management, water harvesting, fuel cells, microfluidics, and biosciences. There exists a more urgent demand for anisotropic wicking behaviors since an increasing number of advanced applications are significantly complex. For example, special-shaped vapor chambers and heating atomizers in some electronic cigarettes need liquid replenishing with various velocities in different wicking behaviors with elliptical shapes on laser structured prismatic microgrooves. The prismatic microgrooves were fabricated via one-step femtosecond laser direct writing, and the anisotropic hemiwicking behaviors were observed when utilizing glycerol, glycol, and water as the test liquid. Specifically, the ratios of horizontal wicking distance in directions along short and long axes were tan 0 degrees, tan 15 degrees, tan 30 degrees, and tan 45 degrees for samples with cross-angles of 0 degrees, 30 degrees, 60 degrees, and 90 degrees, respectively. The vertical water wicking front displayed corresponding angles under the guidance of laser structured prismatic microgrooves. Theoretical analysis shows that the wicking distance is mainly dependent on the cross-angle 0 and surface roughness, in which the wicking distance is proportional to cos(0/2). Driven by the capillary pressure forming in the narrow microgrooves, the liquid initially filled the valleys of microgrooves and then surrounded and covered the prismatic ridges with laser-induced nanoparticles. The abundant nanoparticles increased the surface roughness, leading to the enhancement of wicking performance, which was further evidenced by the larger wicking speed of the sample with more nanoparticles. The mechanism of anisotropic hemiwicking behaviors revealed in this work paves the way for wicking control, and the proposed prismatic microgrooved surfaces with two-dimensional anisotropic hemiwicking performance and superhydrophilicity could serve in a broad range of applications, especially for the advanced thermal management with specific heat load configurations.

High-Performance Bioinspired Hierarchical Microgroove Wick for Ceramic Vapor Chambers Achieved by Nanosecond Pulsed Lasers.

Wicking Enhancement in Three-Dimensional Hierarchical Nanostructures.

Dual-scale porous/grooved microstructures prepared by nanosecond laser surface texturing for high-performance vapor chambers

A Dual-Height Wick to Improve Capillary Performance of Vapor Chambers

Silicon Vapor Chamber with Hierarchical Micro-/Nano Wicks

Analytical and experimental on the capillary rise of aluminum multi-scale microgroove wick structures

Superior Heat and Mass Transfer Performance of Bionic Wick with Finger-like Pores Inspired by the Stomatal Array of Natural Leaf

Enhanced capillary performance of multiscale ultrathin titanium wicks guided by modified wicking dynamics

Ultrathin Aluminum Wick with Dual-Scale Microgrooves for Enhanced Capillary Performance

Anisotropic Hemiwicking Behavior on Laser Structured Prismatic Microgrooves

Enhanced evaporation performance on a novel microstructured surface with vertical dimension gradient

Thermal performance enhancement of vapor chamber with modified thin screen mesh wick by laser etching

Enhanced Heat Transfer Performance in Vapor Chambers Via Fabrication of Novel Regular Composite Porous Wick Structures Using Selective Laser Melting

Gradient-Pattern Micro-Grooved Wicks Fabricated by the Ultraviolet Nanosecond Laser Method and Their Enhanced Capillary Performance

Fast Capillary Wicking on Hierarchical Copper Nanowired Surfaces with Interconnected V-Grooves: Implications for Thermal Management

Laser Microstructuring of Extremely-Thin Vapor Chamber with Hybrid Configuration for Excellent Heat Dissipation

Achieving robust and enhanced pool boiling heat transfer using micro–nano multiscale structures

Design Optimization of Graded Three-Dimensional Micropillar Wicks for Vapor Chamber Evaporators

Study on the thermal performance of pulmonary vascular-inspired grooved vapor chamber

Vapor chamber with two-layer liquid supply evaporator wick for high-heat-flux devices

Fabrication and capillary characterization of multi-scale micro-grooved wicks with sintered copper powder