Abstract:Since MXene (a two-dimensional material) was discovered in 2011, it has been favored in all aspects due to its rich surface functional groups, large specific surface area, high conductivity, large porosity, rich organic bonds, and high hydrophilicity. In this paper, the preparation of MXene is introduced first. HF etching was the first etching method for MXene; however, HF is corrosive, resulting in the development of the in situ HF method (fluoride + HCl). Due to the harmful effects of fluorine terminal on the performance of MXene, a fluorine-free preparation method was developed. The increase in interlayer spacing brought about by adding an intercalator can affect MXene’s performance. The usual preparation methods render MXene inevitably agglomerate and the resulting yields are insufficient. Many new preparation methods were researched in order to solve the problems of agglomeration and yield. Secondly, the application of MXene-based materials in gas sensors was discussed. MXene is often regarded as a flexible gas sensor, and the detection of ppb-level acetone at room temperature was observed for the first time. After the formation of composite materials, the increasing interlayer spacing and the specific surface area increased the number of active sites of gas adsorption and the gas sensitivity performance improved. Moreover, this paper discusses the gas-sensing mechanism of MXene. The gas-sensing mechanism of metallic MXene is affected by the expansion of the lamellae and will be doped with H2O and oxygen during the etching process in order to become a p-type semiconductor. A p-n heterojunction and a Schottky barrier forms due to combinations with other semiconductors; thus, the gas sensitivities of composite materials are regulated and controlled by them. Although there are only several reports on the application of MXene materials to gas sensors, MXene and its composite materials are expected to become materials that can effectively detect gases at room temperature, especially for the detection of NH3 and VOC gas. Finally, the challenges and opportunities of MXene as a gas sensor are discussed.

Rational Design of 1D/2D Heterostructured ZnSnO3/ZnO/Ti3C2TX MXene Nanocomposites for Enhanced Acetone Gas Sensing Performance

α-Fe2O3/TiO2/Ti3C2Tx Nanocomposites for Enhanced Acetone Gas Sensors

High-performance acetone sensor based on electrospun Tb-doped a-Fe<sub>2</sub>O<sub>3</sub> nanotubes

Highly Selective Triethylamine Gas Sensor Based on ZnO/Ti3C2Tx MXene Self-Assembly Heterostructure

Hollow hierarchical TiO2-SnO2-TiO2 composite nanofibers with increased active-sites and charge transfer for enhanced acetone sensing performance

Enhanced Gas Sensing Performance of ZnO/Ti3C2Tx MXene Nanocomposite

Acetone sensing performance of ZnFe2O4/ZnO/g-C3N4 composites: morphology, structure and charge transfer

Engineering metal oxide heterostructures derived from MOFs/MXene hybrids as efficient acetone sensor

A High-Performance Trace Level Acetone Sensor Using an Indispensable V4C3T X MXene.

Shape-modulated Synthesis of Mullite SmMn2O5 Nanostructures with Fast Sensing Response to Acetone

A Facile Construction of Heterostructured ZnO/Co3O4 Mesoporous Spheres and Superior Acetone Sensing Performance

Effective detection of acetone by ZnFe2O4 microspheres decorated with g-C3N4 nanosheets

Enhanced selective acetone gas sensing performance by fabricating ZnSnO3/SnO2 concave microcube

Designing advanced 2D/2D heterojunctions of MoS2 nanosheets/Ti3C2Tx MXene in gas-sensing applications

Rational design of NiO/Ti 3 C 2 T x nanocomposites with enhanced trimethylamine sensing performance

Preparation and Application of 2D MXene-Based Gas Sensors: A Review

Construction of Co3O4/SnO2 Yolk-Shell Nanofibers for Acetone Gas Detection

Controllable Synthesis of Highly Crystallized Mesoporous TiO2/WO3 Heterojunctions for Acetone Gas Sensing

Enhanced ammonia sensing performance based on MXene-Ti3C2Tx multilayer nanoflakes functionalized by tungsten trioxide nanoparticles

Visual chemiresistive dual-mode sensing platform based on SnS2/Ti3C2 MXene Schottky junction for acetone detection at room temperature

ZnO Branched P-Cuxo @N-Zno Heterojunction Nanowires for Improving Acetone Gas Sensing Performance