Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Construction of Co3O4/SnO2 Yolk-Shell Nanofibers for Acetone Gas Detection

High-performance acetone sensor based on electrospun Tb-doped a-Fe<sub>2</sub>O<sub>3</sub> nanotubes

Electrospun SnO2/WO3 Heterostructure Nanocomposite Fiber for Enhanced Acetone Vapor Detection

Efficient acetone sensing utilizing Co3O4-Embedded porous ZnO nanofibers

Effective detection of acetone by ZnFe2O4 microspheres decorated with g-C3N4 nanosheets

Ultrasensitive and Exclusive Chemiresistors with a ZIF-67-Derived Oxide Cage/Nanofiber Co3O4/In2O3 Heterostructure for Acetone Detection

Acetone sensing performance of ZnFe2O4/ZnO/g-C3N4 composites: morphology, structure and charge transfer

Construction of Hierarchical α‐Fe 2 O 3 /SnO 2 Nanoball Arrays with Superior Acetone Sensing Performance

MOF-based nanoscale Pt catalyst decorated SnO2 porous nanofibers for acetone gas detection

Fabrication and Gas Sensing Properties of Hollow Core–shell SnO2/α-Fe2O3 Heterogeneous Structures

Electrospun Eu2O3/Au/SnO2 ternary nanofibers with synergistically enhanced acetone sensing properties

Pore Engineering of Co3O4 Nanowire Arrays by MOF-assisted Construction for Enhanced Acetone Sensing Performances

Enhanced acetone sensing performance based on hollow coral-like SnO2–ZnO composite nanofibers

A Facile Construction of Heterostructured ZnO/Co3O4 Mesoporous Spheres and Superior Acetone Sensing Performance

Au-catalyzed Fe2O3@SnO2 heterostructured nanowires for improved low-concentration acetone sensing

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Hollow hierarchical TiO2-SnO2-TiO2 composite nanofibers with increased active-sites and charge transfer for enhanced acetone sensing performance

Nickel-doped tin oxide hollow nanofibers prepared by electrospinning for acetone sensing

Enhancement of the Acetone Sensing Capabilities to Ppb Detection Level by Fe-doped Three-Dimensional SnO 2 Hierarchical Microstructures Fabricated Via a Hydrothermal Method

Nanoscale PtO2 Catalysts-Loaded SnO2 Multichannel Nanofibers toward Highly Sensitive Acetone Sensor

Enhanced selective acetone gas sensing performance by fabricating ZnSnO3/SnO2 concave microcube