Abstract:To regulate multiple strengthening behaviors of as-cast high entropy alloys (HEAs) with a single phase face centered cubic (FCC) structure, the Mo element has been alloyed to the non-equiatomic CoCrFeNi HEA. Co30Cr30(FeNi)(40-x)Mo-x (x = 0, 2, 4, 6, 8, and 10 at%, hereinafter, simplified as HMo0, HMo2, HMo4, HMo6, HMo8, and HMo10, respectively) HEAs were prepared. The microstructure, tensile properties, and deformation behavior of as-cast alloys were investigated. The results show that the phase composition of HMo0-HMo4 is a single phase solid solution. The microstructure transforms from single phase FCC to FCC and & USigma; dual phases when Mo content is more than 4 at%. The morphology of sigma phase changes from a dispersed rod-like structure to a network structure. Md value is utilized to predict the formation of sigma phase. Mo elements with large atomic size cause severe lattice distortion and reduce stacking fault energy (SFE) in the FCC matrix phase. The yield strength increases gradually from 227 MPa to 688 MPa with the increase of Mo content. HMo4 has high strain hardening ability to realize the synergy of tensile strength and plasticity of 689 MPa and 102.43%. HMo6 has high yield strength (486 MPa) and tensile strength (770 MPa), but without causing serious embrittlement (43.91%). The improvement of yield strength is attributed to solid solution strengthening and precipitated strengthening. The twins and SFs are activated due to the low SFE in HMo4. The dislocation movement is further hindered and the dislocation mean-free path is reduced due to the increase of twin boundary, which contributes to high strain hardening ability. For dual-phase alloy, the dispersed hard sigma phase effectively impedes dislocation movement, causing stress concentration and crack initiation within the sigma phase. The crack propagation is passivated in the soft FCC matrix to maintain a certain plasticity. Excessive network sigma phases damage plasticity. (C) 2022 Published by Elsevier B.V.

Unveiling the Mo Effect on the Microstructural Stability of L12-strengthened Chemically Complex Alloys

Unveiling the Mo effect on the microstructural stability of L1 2 -strengthened chemically complex alloys

Effect of Mo Content on Microstructure and Properties of 00cr12ni9mo (x) Cu2Ti Maraging Stainless Steel

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

Effect of Mo on microstructural stability of a 4th generation Ni-based single crystal superalloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effects of Mo Addition on Microstructure of a 4th Generation Ni-based Single Crystal Superalloy

Effect of Mo on the coherent interface features of γ′-phase strengthened Co-based superalloys

Synergistic effects of Al and Mo on coarsening kinetics of Ni-based superalloys at 1200°C

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Effect of Mo-doping on the stability of D022 superlattice and mechanical properties in the Ni2.1CoCrFeNb0.2 high entropy alloy

Ductilizing Mo alloys via nanoparticle-stabilized microstructural hierarchy

Precipitation Phase and Twins Strengthening Behaviors of As-Cast Non-Equiatomic CoCrFeNiMo High Entropy Alloys

Refinement mechanism of nanoscale Cu-rich precipitates by Mo addition and its effect on strength-toughness of Cu-bearing low carbon high strength steel

Effect of Mo Alloying on the Precipitation Behavior of B2 Nano-Particles in Fe-Mn-Al-Ni Shape Memory Alloys

Uncovering the Effect of Mo Addition on the Precipitation Kinetics of the Γ′ Phase in Ni–Al–Mo Model Superalloys Using CALPHAD-assisted Phase-Field Simulations

Effect of Mo on the σ phase precipitation behavior of super austenitic stainless steel

Synergistic effect of Zr and Mo on precipitation and high-temperature properties of Al-Si-Cu-Mg alloys

The role of Mo on the creep deformation of a 4th generation Ni-based single crystal superalloy at 1100 °C

Effect of Mo on the Mechanical and Corrosion Behaviors in Non-Equal Molar AlCrFeMnNi BCC High-Entropy Alloys