Abstract:Unstable surface species such as residual lithium compounds and surface lattice oxygen at charge state are detrimental factors for the battery performance of Ni-rich cathode (LiNixCoyMn1−x−yO2, x ≥ 0.6, NCM), which induce serious side reactions and lead to rapid capacity loss during cycling. With the advantages of sufficient contacts between gas and solid, gas reactants are introduced to reducing residual lithium compounds via gas-solid reactions or building protective coatings to isolate surface lattice oxygen from the electrolyte via gas-phase deposition, which effectively enhances the cycling stability of NCM. Atomic layer deposition (ALD), as a special coating technology, possesses both the nature of the gas-solid reaction and gas-phase deposition. It is significant to investigate the mechanism of ALD in enhancing the cycling stability of NCM. Here, we report a method to improving the rate capacity and cycling stability of single-crystal NCM via Al2O3 and B2O3 ALD by constructing a highly Li-ions conductive and electrochemical stable surface. The ultrathin coatings are uniformly coated on the surface of NCM. Moreover, surface composition characterizations show the reductions of residual lithium compounds and formations of lithium-containing coatings after the ALD process. By adding a post-annealing process, Al3+ cations and BO3- polyanions doping form on the surface of NCM, which robustly enhanced the stability of surface lattice oxygen of NCM via strong Al-O bond and B-O bond. Moreover, as acidic oxides, B2O3 shows better performance than Al2O3 in reducing residual lithium compounds during the ALD process. Different from Al3+ cations doping occupying the transition metal ions position, BO3- polyanions doping occupies the oxygen ions position, which does not deteriorate the capacity of NCM. Transformation of residual lithium compounds and stabilizing surface lattice oxygen on NCM greatly decrease the formation of LiF and degradation of surface structure, which is the key to the improvement of rate capacity and cycling stability.

Stabilization of the Surface and Lattice Structure for LiNi0.83Co0.12Mn0.05O2via B2O3 Atomic Layer Deposition and Post-Annealing

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Stabilizing the surface of LiNi0.815Co0.15Al0.035O2 by a facile pre-oxidation-coating strategy on the precursor

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Multifunctional Li2O-2B2O3 Coating for Enhancing High Voltage Electrochemical Performances and Thermal Stability of Layered Structured LiNi0.5Co0.2Mn0.3O2 Cathode Materials for Lithium Ion Batteries

Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3

Regulating Surface and Grain-Boundary Structures of Ni-Rich Layered Cathodes for Ultrahigh Cycle Stability

Surface modification single crystal Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 as high performance cathode materials for Li-ion batteries

Research on LiNi_xMn_(2-x)O_4 Surface Modification of LiCoO_2 As Cathode Materials for Li-ion Batteries

Surface and grain boundary coating for stabilizing LiNi0.8Mn0.1Co0.1O2 based electrodes

Reduction of Surface Residual Lithium Compounds for Single-Crystal LiNi0.6Mn0.2Co0.2O2 Via Al2O3 Atomic Layer Deposition and Post-Annealing

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Tuning Li 2 MnO 3 -Like Domain Size and Surface Structure Enables Highly Stabilized Li-Rich Layered Oxide Cathodes

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Outstanding enhancements in stability of LiNi0.8Mn0.1Co0.1O2 cathode by AlPO4/ACB double coating: Insights into surface structure and chemistry

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Simultaneous Enhancement of Interfacial Stability and Kinetics of Single-Crystal LiNi0.6Mn0.2Co0.2O2 Through Optimized Surface Coating and Doping

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries