Abstract:Ambitious electrification roadmaps for the automotive industry have prompted a revolution in winding technology for traction motors in electric vehicles (EV). Hairpin windings with reduced power losses and improved coolability are overtaking the market compared with stranded windings. Currently, most hairpin winding solutions use state-of-the-art end winding cooling strategies. This, however, still cannot bridge the gap for high performance requirements, so supplementary in-slot cooling is needed to make the next step change in achieving high power density. This paper will investigate direct in-slot cooling of hairpin windings with a focus on cooling channel arrangement. A novel analytical parametric Lumped Parameter Thermal Network modelling methodology is developed to choose the thermally optimal in-slot cooling channel radial position for a 150kW high speed traction motor. Two operating points (corner and peak speed) on the peak torque-speed curve are studied to investigate how machine losses influence the choice of the optimal cooling channel position. Changing loss distributions showed an optimal middle channel position for the corner speed and shift towards the airgap at peak speed. A typical slot-opening channel position was shown to reduce hotspot temperatures by 23 K compared with a no-in-slot cooling benchmark, for the most thermally challenging operating point. A further 8 K reduction is achieved, compared to the benchmark, for the most thermally challenging operating condition, when a central cooling channel position is chosen. The novelty of this paper is the multiphysics electromagnetic and thermal modelling methodology integration which the trade-off between losses and temperatures, as impacted by a changing channel position, capture. An FEA model was built to validate the LPTN results for the benchmark case; the temperature rise between the hotspot slot peak and the oil inlet temperature, was predicted within 5%.

Interturn Voltage Stress Comparation and Analysis of Different Typology of Hairpin Windings for EV Traction Machines

Voltage Stress Calculation and Measurement for Hairpin Winding of EV Traction Machines Driven by SiC MOSFET

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

AC Loss Analysis and Measurement of a Hybrid Transposed Hairpin Winding for EV Traction Machines.

Analysis of Circulating Current in Hairpin Windings Due to Manufacturing Deviation

Study on Voltage Distribution in Windings of an Inverter-Fed Traction Motor

Analysis of Inter-Turn Insulation of High Voltage Electrical Machine by Using Multi-Conductor Transmission Line Model

A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors

In-Slot Oil Cooling Arrangement of Hairpin Windings for High Power Density EV Traction Motors

Investigation on the Torsional–Flexural Instability Phenomena during the Bending Process of Hairpin Windings: Experimental Tests and FE Model Validation

Loss analysis and calculation of IPMSM with SiC inverter based on field circuit coupling method

A Thermal Modeling Approach and Experimental Validation for an Oil Spray-Cooled Hairpin Winding Machine

Effect of Jump Voltage and Rise Time on the Temperature and Electric Field Distribution along the Stress Grading System of an Inverter-fed Motor

Investigation On Aging Mechanism Of Winding Insulation Used In Inverter-Fed Traction Motors

Study on Aging Characteristics for Inverter-Fed Traction Motor Inter-Turn Insulation Based on Analysis of Dielectric Characteristic Parameters

Analysis and Design of Multi-Pole High-Speed IPMSM with SiC Based Inverters for EVs

Multifactor Stress Life Model of Polyimide Film Used in Inverter-Fed Traction Motors

Comparative Investigations of Inverter Short-Circuit Fault and Winding Terminal Short-Circuit Fault in Open-End Winding Five-Phase PM Machine System

A Novel Nonlinearly Equivalent Circuit Model for Calculating Electric Fields Along the Stator End-winding of HV Rotating Machine

Stress grading system optimisation for an inverter‐fed rotating machine

Analysis of the Interturn Short Circuits of Stator Field Windings in Multiphase Angular Brushless Exciter at Nuclear Power Plant