Abstract:While flow-through anodic oxidation (FTAO) technique has demonstrated high efficiency to treat various refractory waste streams, there is an increasing concern on the secondary hazard generation thereby. In this study, we developed an integrated system that couples FTAO and cathodic reduction processes (termed FTAO-CR) for sustainable treatment of chlorine-laden industrial wastewater. Among four common electrode materials ( i.e. , Ti 4 O 7 , β -PbO 2 , RuO 2 , and SnO 2 -Sb), RuO 2 flow-through anode exhibited the best pollutant removal performance and relatively low ClO 3 and ClO 4 yields. Because of the significant scavenging effect of Cl − in real wastewater treatment, the direct electron transfer process played a dominant role in contaminant degradation for both active and nonactive anodes though active species ( i.e. , active chlorine) were involved in the subsequent transformation of the organic matter. A continuous FTAO-CR system was then constructed for simultaneous COD removal and organic and inorganic chlorinated byproduct control. The quality of the treated effluent could meet the national discharge permit limit at low energy cost (~4.52 kWh m 3 or ~0.035 kWh g 1 -COD). Results from our study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution. Environmental Implications Industrial wastewater usually features high organic matter content and complex composition, posing a significant environmental risk. While anodic oxidation has demonstrated high efficiency, there is increasing concern on the secondary hazard generation thereby. An energy-efficient system coupling flow-through anodic oxidation and cathodic reduction processes is therefore proposed, achieving simultaneous organic contaminant removal and chlorinated byproduct control. The direct electron transfer process imparts an advantage in treating chlorine-laden wastewater compared to the • OH-based advanced oxidation counterparts. The results of this study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution.

Performance Evaluation of a Wet Air Oxidation Reactor with External Circulation for High-Chemical Oxygen Demand Wastewater Treatment

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Life cycle assessment of high concentration organic wastewater treatment by catalytic wet air oxidation

Wet Air Oxidation of Desizing Wastewater from the Textile Industry

Kinetics of Wet Air Oxidation of Wastewater from Natural Fiber Web Desizing

Energy-efficient Treatment of Refractory Industrial Effluent Using Flow-through Electrochemical Processes: Oxidation Mechanisms and Reduction of Chlorinated Byproducts

Performance, Kinetics Behaviors and Microbial Community of Internal Circulation Anaerobic Reactor Treating Wastewater with High Organic Loading Rate: Role of External Hydraulic Circulation.

Kinetic study into the wet air oxidation of printing and dyeing wastewater

Wastewater treatment, hydrogen and energy recovery using electrochemical advanced oxidation

Oxygen reduction reaction coupled electro-oxidation for highly-efficient and sustainable water treatment

Performance Comparison between upflow Microaerobic-Oxic Process( M/O) and Traditional Anoxic-Oxic System( A/O) for Domestic Wastewater Treatment

Excellent performance of electro-assisted catalytic wet air oxidation of refractory organic pollutants

Comprehensive assessment of system performance in a full-scale wastewater treatment plant with an anaerobic/anoxic/aerobic membrane bioreactor combined with the ozonation process.

Simulation and Optimization of A Full-Scale Carrousel Oxidation Ditch Plant for Municipal Wastewater Treatment

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Energy Optimization of Wet Air Oxidation Reactors with Sub-Millimeter Bubble Intensification

Decoupled Oxidation Process Enabled by Atomically Dispersed Copper Electrodes for In-Situ Chemical Water Treatment

A review of developments in process flow for supercritical water oxidation

A2O–MBR–BAF–O3 process for treating high organic wastewater with high ammonia nitrogen

Performance of an Integrated Reactor with Airlift Loop and Sedimentation for Municipal Wastewater Treatment: A 150 M3/d Pilot Case Study

Integrated oxidation and membrane processes for produced water treatment: An overview and challenges