Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Breaking the Trade‐Off Between Ionic Conductivity and Mechanical Strength in Solid Polymer Electrolytes for High‐Performance Solid Lithium Batteries

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Novel PEO-based Solid Polymer Electrolyte with High Elasticity and High Ionic Conductivity for Room Temperature Lithium Metal Batteries

Solid Polymer Electrolytes Based On Cross-Linked Polybenzoxazine Possessing Poly(Ethylene Oxide) Segments Enhancing Cycling Performance Of Lithium Metal Batteries

High-performance Solid Polymer Electrolytes for Lithium Ion Batteries Based on Sulfobetaine Zwitterion and Poly (ethylene Oxide) Modified Polysiloxane

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Ultrahigh Elastic Polymer Electrolytes for Solid-State Lithium Batteries with Robust Interfaces.

A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

MOF/Poly(Ethylene Oxide) Composite Polymer Electrolyte for Solid-state Lithium Battery

Polybenzimidazole-reinforced polyethylene oxide-based polymer-in-salt electrolytes enabling excellent structural stability and superior electrochemical performance for lithium metal batteries

Improved Mechanical Strength without Sacrificing Li-Ion Transport in Polymer Electrolytes

PEO-Based Solid Composite Polymer Electrolyte for High Capacity Retention All-Solid-State Lithium Metal Battery

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Molecular Crowding Solid Polymer Electrolytes for Lithium Metal Battery by In Situ Polymerization

Fast lithium ion transport in solid polymer electrolytes from polysulfide-bridged copolymers

Correlating Electrode–Electrolyte Interface and Battery Performance in Hybrid Solid Polymer Electrolyte‐Based Lithium Metal Batteries

Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries