Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Analysis of a Novel Dual Winding Dual Magnet Machine with Compound Fault-Tolerance Capability

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Design Principles of Dual Winding Dual Permanent Magnet Machines with Multi-torque Components

Analysis and Validation of Dual Armature Winding Magnetless Machines with Multi-Torque Component

Design and Control of a Novel Fault-tolerant Dual-armature Winding Flux Modulated Permanent Magnet Machine

Studies of Mutual Inductance Suppression of Dual Winding Dual Magnet Machines

Design and Comparative Analysis of Dual Winding Dual Magnet Machines with Different PM Arrangements

Analysis and Experiment of a Dual StatorRotor PM and Winding Flux Modulated PM Machine

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Novel Fault-Tolerant Doubly Fed Flux Reversal Machine with Armature Windings Wound on Both Stator and Rotor Teeth

Operating Principle and Performance Analysis of a Novel Stator-PM Fault Tolerant Machine

Novel Dual Winding Dual PM Flux Modulated Machines with Array Type Torque

Multiphase Modular Fault-Tolerant Permanent-Magnet Machine With Hybrid Single/Double-Layer Fractional-Slot Concentrated Winding

Comparative Study of Novel Dual Winding Dual Magnet Flux Modulated Machines with Different Stator/Rotor Pole Combinations

A Fault-Tolerant Machine Based on Radial-Flux Dual Stator and Parallel Permanent-Magnet/Reluctance Structure

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies