Abstract:Ammonia is an indispensable component of modern fertilizers and a key nitrogen source in chemical synthesis, making it one of the highest-volume commodity chemicals. 1–3 However, its synthesis via the Haber-Bosch process contributes significantly to global carbon emissions, motivating the development of alternative pathways for ammonia synthesis. 4–6 Of many alternative methods, an electrochemical lithium-mediated process is one of the most promising. Since its initial implementations, 7–9 novel cell designs 10–12 and electrolytes 13–15 have greatly improved the selectivity and productivity of lithium-mediated electrochemical ammonia synthesis (LiMEAS), but questions persist regarding the mechanism of nitrogen fixation and the role of lithium in this process (Figure 1a). In particular, many in the literature have alluded to the possible importance of lithium passivation species, commonly known as the solid electrolyte interphase (SEI), but their small length-scale and reactivity make direct observation challenging. 11,13,15 In this work, we leveraged a multiscale approach to reveal connections between device-scale performance and nanoscale passivation behavior in LiMEAS. We used four model systems, varying the presence of proton donor (no proton donor or 0.1 M ethanol), and the feed gas (Ar or N 2 ), which allowed us to examine the influence of the two reactive components in LiMEAS which are not usually present for lithium metal electrodeposition in the literature: proton donor and nitrogen. For each model system, we quantified major reaction products (Figure 1b, f). Ammonia and lithium nitride were measured by the salicylate colorimetric assay, 16 hydrogen by online gas chromatography (GC), and residual lithium by galvanostatic stripping. We used scanning electron microscopy to observe microscale morphology, and to gain deeper insights into nanoscale surface morphology, we implemented cryo-electron microscopy (cryo-EM) (Figure 1c-d, g-h). Cryo-EM is a powerful technique that enables high-resolution observation of beam-sensitive metallic lithium and SEI materials by holding them at cryogenic temperatures, which preserve their native state. 17 In addition to nanoscale morphological information, cryo-EM provided chemical information in the form of selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDS), and electron energy loss spectroscopy (EELS), which were paired with X-ray photoelectron spectroscopy (XPS) to develop an understanding of the chemistry of the interphase. Our results indicate that the proton donor governs reactivity toward nitrogen reduction in LiMEAS via its influence on the SEI. In the absence of proton donor, the lithium deposit forms a passivating, mosaic-structured SEI that preserves the deposited lithium, regardless of whether the feed gas is argon or nitrogen (Figure 1e). With the addition of ethanol, the surface changes significantly. The resultant SEI does not passivate the lithium, allowing it to react with nitrogen and other electrolyte components (Figure 1i). This permeable SEI appears to be mosaic in structure, with organic phases dominated by ethanol breakdown products, and its formation is key to the functionality of lithium-mediated ammonia synthesis. These findings can help guide the development of optimal SEIs for selectivity and stability of LiMEAS, and beyond that, offer insights into the characteristics of the lithium SEI at a reactive rather than passivated interface. Figure 1. (a) Schematic of possible lithium reactions. (b) and (f) Faradaic efficiencies of quantified reaction products, with no proton donor (b) and with ethanol present (f). (c-d) and (g-h) Cryo-TEM images of material deposited with no proton donor (c-d), and with ethanol present (g-h). (e) and (i) schematics of surface reactivity, with no proton donor (e) and with ethanol present (i). References J. W. Erisman, M. A. Sutton, J. Galloway, Z. Klimont, and W. Winiwarter, Nat. Geosci., 1, 636–639 (2008). G. R. Maxwell, Synthetic Nitrogen Products, Kluwer Academic Publishers, New York, (2004). FAO, World fertilizer trends and outlook to 2022, (2019). J. G. Chen et al., Science, 360 (2018). G. Soloveichik, Nat. Catal., 2, 377–380 (2019). Z. J. Schiffer and K. Manthiram, Joule, 1, 10–14 (2017). F. Fichter, P. Girard, and H. Erlenmeyer, Helv. Chim. Acta, 13, 1228–1236 (1930). A. Tsuneto, A. Kudo, and T. Sakata, Chem. Lett., 22, 851–854 (1993). A. Tsuneto, A. Kudo, and T. Sakata, J. Electroanal. Chem., 367, 183–188 (1994). N. Lazouski, M. Chung, K. Williams, M. L. Gala, and K. Manthiram, Nat. Catal., 3, 463–469 (2020). S. Z. Andersen et al -Abstract Truncated-

In situ neutron reflectometry reveals the interfacial microenvironment driving electrochemical ammonia synthesis

Investigating Solid Electrolyte Interphase Layer Dynamics in the Electrochemical Li-Mediated Ammonia Synthesis

Determining the Composition and Structure of a High-Performing SEI Layer for Lithium-Mediated Nitrogen Reduction to Ammonia

Direct in situ NMR observation of lithium plating, corrosion, nitridation and protonolysis for ammonia synthesis

Operando Investigations of the Solid Electrolyte Interphase in the Lithium Mediated Nitrogen Reduction Reaction

Mechanistic Insights into Lithium-Mediated Nitrogen Reduction Reaction for Ammonia Electrosynthesis

Revealing Nanoscale Passivation Films and Their Role in Reactivity in Lithium-Mediated Ammonia Synthesis

Electrosynthesis of ammonia with high selectivity and high rates via engineering of the solid-electrolyte interphase

Lithium-mediated nitrogen reduction to ammonia via the catalytic solid–electrolyte interphase

Mechanistic insights into the stepwise lithium-mediated electrochemical nitrogen reduction for enhanced ammonia synthesis

Lithium‐Mediated Nitrogen Reduction for Ammonia Synthesis: Reviewing the Gap between Continuous Electrolytic Cells and Stepwise Processes through Galvanic Li─N2 Cells

(Invited) Electrochemical Nitrogen Fixation under Ambient Conditions

Interfacial electric field triggered N2 activation for efficient electrochemical synthesis of ammonia

Creating Highly Active Iron Sites in Electrochemical N2 Reduction by Fabricating Strongly-Coupled Interfaces

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance

Li-N 2 Battery for Ammonia Synthesis and Computational Insight

Continuous-flow electrosynthesis of ammonia by nitrogen reduction and hydrogen oxidation

Electrolyte Formulation By Design of Experiments: The Hidden Correlations in the Li-Mediated Nitrogen Reduction Reaction for Ammonia Production

Proton Donors Influence Nitrogen Adsorption in Lithium-Mediated Electrochemical Ammonia Synthesis

Visualizing the Reaction Interface of Lithium-Mediated Nitrogen Fixation

(Invited) Distributed NH3 Synthesis Via Electrochemical Reduction of N2 on Transition Metal Nitrides in a PEM Electrolyzer