Optimal procurement strategies for contractual assembly systems with fluctuating procurement price (vol 291, pg 1027, 2020)

Yi Yang,Jianan Wang,Youhua Chen,Zhiyuan Chen,Yanchu Liu

DOI: https://doi.org/10.1007/s10479-019-03361-5

IF: 4.82

2024-01-01

Annals of Operations Research

Abstract:This erratum is published because vendor overlooked corrections and section headings were given in numbered and run-on format.

What problem does this paper attempt to address?

Correction To: Optimal Procurement Strategies for Contractual Assembly Systems with Fluctuating Procurement Price

Yi Yang,Jianan Wang,Frank Chen,Zhiyuan Chen,Yanchu Liu

DOI: https://doi.org/10.1007/s10479-019-03361-5

IF: 4.82

2019-01-01

Annals of Operations Research

Abstract:This erratum is published because vendor overlooked corrections and section headings were given in numbered and run-on format.
Corrigendum: Dynamic pricing optimization for commercial subcontracting power supplier engaging demand response considering building virtual energy storage

Huang Huang,Yifei Ning,Yunhao Jiang,Zhihui Tang,Yong Qian,Xin Zhang

DOI: https://doi.org/10.3389/fenrg.2024.1498767

IF: 3.4

2024-10-09

Frontiers in Energy Research

Abstract:This article is a correction to: Dynamic pricing optimization for commercial subcontracting power suppliers engaging demand response considering building virtual energy storage

energy & fuels
Inventory and Production Decisions for an Assemble-to-Order System with Uncertain Demand and Limited Assembly Capacity

Ke Fu,Vernon Ning Hsu,Chung-Yee Lee

DOI: https://doi.org/10.1287/opre.1060.0335

IF: 2.7

2006-12-01

Operations Research

Abstract:This paper considers an inventory and production-planning problem for a contract manufacturer who anticipates an order of a single product, but with uncertain quantity. To meet the challenges of long component procurement lead times and limited assembly capacity, which may render production time insufficient to assemble total order quantity, the manufacturer may need to procure components or even assemble some quantities of the final product before receiving the confirmation of the actual order quantity. We present profit-maximization models that make optimal inventory and production decisions in the above assemble-to-order environment. We also consider the option of outsourcing, so that the manufacturer can outsource part of his production to an external facility that also has limited capacity. We establish structural properties of optimal solutions and develop efficient solution procedures for the proposed problems. We also provide sensitivity analysis of the optimal decisions, and some managerial insights.

management,operations research & management science
Optimal procurement strategy for multi-echelon remanufacturing systems under quality uncertainty

Haolan Liao,Qingyu Zhang,Lu Li

DOI: https://doi.org/10.1016/j.tre.2023.103023

2023-01-23

Abstract:Uncertainties in the quality and price of returned items add to the management complexity of remanufacturing system. To achieve the optimal procurement strategy for improved economic performance, this paper develops a mathematical model to quantify the impact of quality-based categorization of returned products under different return scenarios. Through the stochastic analysis of quality uncertainty with returns, it derives the optimal procurement strategy for cost minimization. The results show that an optimal procurement decision leads to over 80% cost savings in multi-echelon remanufacturing systems. Further, to bridge the gap between optimality theory and practical applications, this paper employs maximum likelihood estimation to speculate the key parameters of quality distribution in an empirical case whereby the optimal procurement strategies are formulated. Thus, the study provides a mathematical foundation for remanufacturers to make optimal decisions for the minimization of total cost. Importantly, the paper innovatively employs a quality coefficient to signal the overall condition in a batch of returned cores before accepting or dismantling, and then establishes the explicit relationship among the quality coefficient and production indexes in remanufacturing.

transportation,transportation science & technology,engineering, civil,operations research & management science,economics
Contract Assembly: Dealing with Combined Supply Lead Time and Demand Quantity Uncertainty

Jing-Sheng Song,Candace A. Yano,Panupol Lerssrisuriya

DOI: https://doi.org/10.1287/msom.2.3.287.12346

2000-01-01

Manufacturing & Service Operations Management

Abstract:We consider a problem faced by a contract assembler that both assembles finished goods and procures the associated component parts for one of its major customers. Because of rapid changes in technology and ongoing engineering changes, all parts subject to obsolescence are purchased only for the current customer order. The procurement lead times of the components are random. Moreover, although the order for the finished product has a defined due date, the contract allows the customer to change the order quantity. Consequently, the assembler also faces a random demand. The assembler must determine how much to order and when to order each component part. The objective is to minimize the total expected cost, including the cost of holding components prior to their assembly, penalties for tardiness visa-vis the assembly due date, and overage and underage costs in satisfying the demand quantity. We present some structural results and discuss insights regarding optimal policies. We also present several simple heuristic policies and compare them to optimal policies. Computational results indicate that ignoring lead time variability can be costly, but relatively simple heuristics that consider lead time variability perform quite well.
Optimal Decisions for Assemble-To-Order Systems with Uncertain Assembly Capacity

Yongbo Xiao,Jian Chen,Chung-Yee Lee

DOI: https://doi.org/10.1016/j.ijpe.2009.07.012

IF: 11.251

2010-01-01

International Journal of Production Economics

Abstract:In this paper we study a single-product, single-period assemble-to-order (ATO) model with uncertain assembly capacity. To reduce the risk/cost, the manufacturer may need to assemble in advance. Also, when the demand is realized, he/she may need to place emergency component orders. We present a profit-maximization model that makes optimal inventory and production decisions. We establish structural properties of the optimal solutions, and identify the sufficient and necessary condition under which assemble-in-advance strategy should be adopted. We further extend the model to the situation where assembly outsourcing can be used to make up for the capacity shortage. Numerical experiments are conducted to show the impact of uncertainties associated with demand and capacity.
Component ordering strategies in assembly systems with uncertain capacity and random yield

Qingkai Ji,Shaorui Zhou,Bo Li,Zhiming Chen

DOI: https://doi.org/10.1016/j.apm.2020.06.065

IF: 5.336

2020-12-01

Applied Mathematical Modelling

Abstract:<p>Sourcing components in a complex global supplier network may lead to a high degree of supply uncertainty. Events, such as unexpected production defects or insufficient supplier capacity, can cause unexpected shortages of required components and halt the assembly of final products. Accordingly, the assembly enterprises must effectively manage various supply uncertainties in their component ordering decisions to avoid such component shortfalls. These issues have guided this research to investigate the optimal ordering strategies of an assembler facing the following two types of supply uncertainty: the uncertain production capacity of a standard component (component 1) and the random production yield of a core component (component 2). The assembler makes the component ordering decisions before these supply uncertainties are realized. We characterize the optimal ordering decision and find that the assembler should order components 1 and 2 according to a fixed ratio, which only depends on the random yield of component 2 and the production cost of component 1, but not on the uncertain capacity of component 1. A case study is presented to further explore the intertwined effects of these two uncertainties in an assembly system. Finally, the model is extended to consider a secondary option of buying additional component 1s after observing some or all of the supply uncertainties, and this secondary option endows the firm with different capabilities in counteracting the supply uncertainties.</p>

mechanics,engineering, multidisciplinary,mathematics, interdisciplinary applications
Procurement Risk Management of Raw Materials Via Combined Use of Option Contracts and Spot Markets

吴桥,刘南,庞海云

DOI: https://doi.org/10.13195/j.cd.2013.03.16.wuq.005

2013-01-01

Abstract:A two-period model is proposed to investigate optimal combined purchasing strategies for a risk-averse manufacturer in an environment of uncertain raw material prices.The manufacturer can buy raw materials via option contracts,or from a spot market.The research results show that the optimal options purchasing quantity is influenced by the degree of risk aversion,the option premium and the exercise price.The relationship between the optimal purchasing quantity and the degree of risk aversion is affected by option prices.And the optimal purchase quantity decreases as the option premium or exercise price rises.Finally,it is demonstrated by comparison that the mean-variance utility of the manufacturer can be improved by using a combined purchasing strategy.
Correction: Yang et al. Operational Decisions on Remanufacturing under the Product Innovation Race. Sustainability 2023, 15, 4920

Dexiang Yang,Qin Yang,Lei Zhang

DOI: https://doi.org/10.3390/su151612116

IF: 3.9

2023-08-09

Sustainability

Abstract:The authors would like to make the following corrections about the published paper [...]

environmental sciences,environmental studies,green & sustainable science & technology
Managing Emergency Procurement Using Option Contract under Supply Disruption and Demand Uncertainty

Xinjun Li,Yao Zhang

DOI: https://doi.org/10.1155/2023/6516689

IF: 1.43

2023-02-07

Mathematical Problems in Engineering

Abstract:Effective and flexible procurement and production strategies are capable of alleviating and mitigating supply disruption and demand risk. Considering the price fluctuation caused by environmental change, we investigate the optimal procurement and production strategies under supply disruption and demand uncertainty based on option contract in a two-stage supply chain consisting of a retailer who has two procurement opportunities and a supplier who has the emergency production chance. We explore the value of option contract by comparing it with the optimal decision making under no option contract. The result shows that option ordering and emergency procurement can coordinate the optimal strategies under uncertain environment, improving the economic performance of whole supply chain. When the disruption probability is high or the price of emergency procurement is lower, the higher option price can stimulate the supplier to produce more products to satisfy the retailer's emergency order at a low price, which is beneficial to both, and the value of option ordering is greater. Otherwise, the emergency procurement is worth more for the core enterprise. The moderate exercise price is conducive to the long-term cooperation of the supplier and the retailer.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Procurement Contracts under Asymmetric Yield Information

Jianing Li,Houcai Shen

DOI: https://doi.org/10.1109/icsssm.2018.8465060

2018-01-01

Abstract:Asymmetric information among supply chain is a normal problem in supply chain risk management literatures. But few of them concern asymmetry of supply risk information while actually supplier does tend to hold some private knowledge about supply uncertainty. In this paper, we investigate buyer's procurement contracts design when yield uncertainty is privately known by supplier. With a given contract structure where the payment depends partly on order quantity and partly on yield quantity, we formulate corresponding game models under complete and asymmetric information based on a single-supplier-single-buyer supply chain system and find the supplier has motivation to reporting a lower yield rate under asymmetric environment. When the supplier's yield rate is two-point distributed, we derive the optimal procurement contracts and prove that buyer will provide either Shut-Down Contracts or Pooling Contracts. Moreover, compared with complete information, buyer's profit is always declined by the asymmetry while supplier does not certainly benefit: for a supplier with higher yield rate, private information is always an advantage, but for a supplier with lower yield rate, such asymmetry may hurt her profit on the contrary. It means sharing information sometimes might be a win-win policy for supplier with lower yield rate.
Optimum profit model considering production, quality and sale problem

Chung-Ho Chen,Chih-Lun Lu

DOI: https://doi.org/10.1080/00207721.2010.543479

IF: 2.648

2011-12-01

International Journal of Systems Science

Abstract:Chen and Liu [‘Procurement Strategies in the Presence of the Spot Market-an Analytical Framework’, Production Planning and Control, 18, 297–309] presented the optimum profit model between the producers and the purchasers for the supply chain system with a pure procurement policy. However, their model with a simple manufacturing cost did not consider the used cost of the customer. In this study, the modified Chen and Liu's model will be addressed for determining the optimum product and process parameters. The authors propose a modified Chen and Liu's model under the two-stage screening procedure. The surrogate variable having a high correlation with the measurable quality characteristic will be directly measured in the first stage. The measurable quality characteristic will be directly measured in the second stage when the product decision cannot be determined in the first stage. The used cost of the customer will be measured by adopting Taguchi's quadratic quality loss function. The optimum purchaser's order quantity, the producer's product price and the process quality level will be jointly determined by maximising the expected profit between them.

automation & control systems,computer science, theory & methods,operations research & management science
Contracts for Changing Times: Sourcing with Raw Material Price Volatility and Information Asymmetry.

Wei Zhang,Deke Zhou,Liwen Liu

DOI: https://doi.org/10.1287/msom.2013.0454

2014-01-01

Manufacturing & Service Operations Management

Abstract:We analyze and compare five contract schemes used in a supply chain: fixed price (FP), cost reimbursement (CR), procurement control (PC), index-linked payment (IL), and relational (RL) contracts. From interviews, we learned that (1) FP and RL are the two most popular schemes; (2) PC is less popular, but it is used more often than CR and IL; and (3) a couple of firms are considering CR and IL and will probably use them in the future. By presenting a two-stage contracting model that incorporates a risk-neutral buyer and a risk-averse supplier under raw material price uncertainty and information asymmetry, we show that overhedging the supplier's risk with an IL contract can be optimal for the buyer in many cases. Using the model to study the effects of price trends, risk attitudes, information asymmetry, and constraints on purchase time, we find that each contract can be optimal in certain situations from certain standpoints. In particular, when a long-term relationship is considered, RL is equivalent to IL as long as the contract is self-enforcing, and RL can replace IL when no index is available. Connecting the analytical results to the interviews, we find that firms' choices and considerations can be well understood.
A Note On "Revenue-Sharing Vs. Wholesale-Price Contracts In Assembly Systems With Random Demand"

Hong Fu,Yongkai Ma,Xiaowo Tang

DOI: https://doi.org/10.1109/ICSSSM.2015.7170195

2015-01-01

Abstract:Gerchak and Wang [Gerchak, Y., Wang, Y., 2004. Revenue-sharing vs. wholesale-price contracts in assembly systems with random demand. Production and Operations Management 13(1), 23-33] develop a buy-back contract to coordinate a decentralized push assembly system. However, there exists deficiency in their coordination contract, because, as shown in this note, the highest expected profit a supplier in the push system can get is negative in some cases. Thus, we develop a modified buy-back contract to coordinate the push system. We also show that the modified buy-back contract has sufficient flexibility to allocate the expected profit of the system and achieves Pareto improvements.
Take-or-pay contracted assembly system with random demand

Hongsheng Sheng Chu,Jing Wang,Yihui Jin

DOI: https://doi.org/10.1109/CDC.2004.1429311

2004-01-01

Abstract:An assembler needs sets of components, each produced by a different supplier. To buy the components from the components suppliers and assemble the final product, the assembler must order before observing the actual demand. Under a take-or-pay contract given by the supplier, the assembler can procurement the component directly or prepay for the option first and buy the component when demand observed. All parts are only purchased for the current demand season. The assembler faces a random demand and spot market exists for the components if necessary. The objective is to maximize the total expected profit. We present some structural results of optimal procurement decision and numerical results given.
The Supply Chain Optimal Contract Design under Asymmetrical Information

XU Qing,ZHU Dao-li,LI Shan-liang

DOI: https://doi.org/10.3321/j.issn:1000-6788.2007.04.004

2007-01-01

Abstract:In this paper,we study the principal-agent problem between the supplier and the retailer.we formulate the problem as a stochastic bi-level problem.Under suiaable conditions,we prove the existence of solutions,and give all the solutions.Furthermore,we give some economic interpretations of some results obtained in this paper on the basis of analysis of the solution.
Coordination of Assembly Supply Chain with Loss-Averse Suppliers

FU Hong,MA Yong-kai,TANG Xiao-wo

DOI: https://doi.org/10.13383/j.cnki.jse.2016.04.008

2016-01-01

Abstract:In view of the risk appetite characteristics of decision makers and the rapid development of intra-product specialization,an assembly supply chain model with multiple loss-averse component suppliers and a risk-neutral assembler is established.In the model,each supplier provides a complementary component to the assembler with a pull contract.Firstly,the study derives the optimal strategy of each enterprise under the pull contract,and finds that the optimal production quantity of each component under the pull contract is less than that of centralized system.Then,it designs the coordination mechanism by introducing the price subsidy policy.Finally,numerical analysis verifies the effectiveness of coordination mechanism.
Supply chain coordination with dual procurement sources via real-option contract

Meiling Luo,Gang Li,C.L. Johnny Wan,Rong Qu,Ping Ji

DOI: https://doi.org/10.1016/j.cie.2014.12.019

IF: 7.18

2015-01-01

Computers & Industrial Engineering

Abstract:•We explore the manufacturer’s optimal procurement strategy under stochastic demand.•The manufacturer purchases from the supplier and the existing spot markets.•The manufacturer maneuvers the real-option to coordinate the supply chain.•Effects of risks in the spot market on market equilibrium are derived.
Online Purchasing Strategy for Order-Based Procurement

NI Guan-qun,KONG Xin,LIU Qiang,WANG Shao-hua,ZHENG Fei-feng

DOI: https://doi.org/10.3969/j.issn.1007-3221.2011.03.003

2011-01-01

Abstract:In the mode of purchase to order,purchase cost and delay cost are interactive.Vendors need to choose appropriate purchase strategy to balance the two items in order to minimize the total cost.The paper first analyzes the offline case where the total information on order demands is known beforehand,and gives an optimal offline strategy with time complexity.It then discusses the online purchasing strategy for the online case where order demands are unpredictable.A 2-comptitive online strategy is proposed,and a lower bound of competitive ratio for the online case is proved as well.
Optimal Ordering Policies And Sourcing Strategies With Supply Disruption

Xiaoming Yan,Minghui Zhang,Ke Liu,Yong Wang

DOI: https://doi.org/10.3934/jimo.2014.10.1147

2014-01-01

Journal of Industrial and Management Optimization

Abstract:Successful supply chain management has to find an effective sourcing strategy to cope with uncertainty in both supply and demand. Most of existing literature deals with the problems related to the uncertain demand, however, in this paper, we discuss a model in which a firm is in the face of demand uncertainty and supplier reliability uncertainty at the same time prior to a single selling season. The firm has two instants to order from two suppliers (one supplier is completely reliable and the other is unreliable), while the unreliable supplier's reliability is uncertain at instant 1 and is completely observed at instant 2. To determine the cost-minimizing ordering strategies at both instants, the firm has to evaluate the trade-off between a more accurate forecast and a potentially higher unit cost at instant 2. We present the optimal supplementary order quantities with the realized reliability and give the optimal ordering policies and sourcing strategies at instant 1 under certain conditions. We find conditions under which the order quantity from the unreliable supplier at instant 1 is decreasing in the reorder costs at instant 2.

Optimal procurement strategies for contractual assembly systems with fluctuating procurement price (vol 291, pg 1027, 2020)

Correction To: Optimal Procurement Strategies for Contractual Assembly Systems with Fluctuating Procurement Price

Corrigendum: Dynamic pricing optimization for commercial subcontracting power supplier engaging demand response considering building virtual energy storage

Inventory and Production Decisions for an Assemble-to-Order System with Uncertain Demand and Limited Assembly Capacity

Optimal procurement strategy for multi-echelon remanufacturing systems under quality uncertainty

Contract Assembly: Dealing with Combined Supply Lead Time and Demand Quantity Uncertainty

Optimal Decisions for Assemble-To-Order Systems with Uncertain Assembly Capacity

Component ordering strategies in assembly systems with uncertain capacity and random yield

Procurement Risk Management of Raw Materials Via Combined Use of Option Contracts and Spot Markets

Correction: Yang et al. Operational Decisions on Remanufacturing under the Product Innovation Race. Sustainability 2023, 15, 4920

Managing Emergency Procurement Using Option Contract under Supply Disruption and Demand Uncertainty

Procurement Contracts under Asymmetric Yield Information

Optimum profit model considering production, quality and sale problem

Contracts for Changing Times: Sourcing with Raw Material Price Volatility and Information Asymmetry.

A Note On "Revenue-Sharing Vs. Wholesale-Price Contracts In Assembly Systems With Random Demand"

Take-or-pay contracted assembly system with random demand

The Supply Chain Optimal Contract Design under Asymmetrical Information

Coordination of Assembly Supply Chain with Loss-Averse Suppliers

Supply chain coordination with dual procurement sources via real-option contract

Online Purchasing Strategy for Order-Based Procurement

Optimal Ordering Policies And Sourcing Strategies With Supply Disruption