Extraction of Geometric Features and Analysis of Flow Mechanism of High Loaded Compressor Airfoils at Low Reynolds Number

Ziyun Zhang,Yanhui Wu,Zhengtao Guo,Jiezhong Dong

DOI: https://doi.org/10.1063/5.0195387

IF: 4.6

2024-01-01

Physics of Fluids

Abstract:When the aircraft cruising at high altitude, the aerodynamic performance of the compressor sharply decreases due to the enhanced boundary layer separation loss. Therefore, it is of great significance to design the high-performance airfoils suitable for low Reynolds numbers (Re) to improve the aerodynamic performance of compressor. In this paper, numerical simulations were carried out on a high-loaded subsonic compressor cascade V103 at low Re. Meanwhile, a multi-objective optimization of blade profile was performed to get optimal solutions, and data mining techniques were applied to extract valuable design knowledge from the optimal database. The results show that the Pareto-optimal airfoils achieve a maximum reduction of 27.32% in total pressure loss coefficient under design condition and 36.71% under near stall condition. Compared with the original airfoil, the curvature distribution law of the camber line with larger values at both ends and smaller values in the middle is advantageous for the performance of the compressor cascade under design condition. This distribution pattern causes a forward shift for the loading distribution of airfoils, accompanied by an earlier transition onset. Additionally, it reduces adverse pressure gradient at the rear part of suction surface, which suppresses the development and growth of laminar separation bubble and delays the separation of turbulent boundary layer. Under near stall condition, maintaining larger leading edge angle and uniform flow diffusion is beneficial for improving the performance of compressor cascade. This is because the larger leading edge angle reduces incidence angle, while the uniform flow diffusion inhibits a great flow separation.