Abstract:Flexible polyimide foams (PIFs) demonstrate a great potential for applications in the fields of thermal insulation, flame retardancy and irradiation tolerance. In this work, mechanically flexible PIFs with anisotropic pore structure were prepared by adopting the copolymerization strategy and microwave-assisted foaming process. The copolymerization reaction was conducted to synthesize polyester ammonium salt (PEAS) precursors using 3,3 ',4,4 '-benzophenone tetracarboxylic acid dianhydride (BTDA) as dianhydride, 4,4 '-diaminodiphenyl ether (ODA) and 4,4 '-diaminodiphenyl sulfone (DDS) as the copolymerized diamines; afterwards, PEAS powders with particle sizes ranging from 100 to 300 mu m were obtained by drying, crushing and sieving treatments, which were used as the feedstock for "bottom-up" microwave-assisted foaming and thermal imidization process, thereby leading to the formation of PIFs with regular three-dimensional near-spherical pores in vertical direction (parallel to the pore growth direction) and the aligned ellipsoidal strip-like pore structure in horizontal direction. The directional growth of foam pores resulted in anisotropic mechanical flexibility and thermal insulation performance. Moreover, PIFs possessed excellent thermal stability and flame retardancy with the initial thermal degradation temperature higher than 545 degrees C and limited oxygen index up to 58.8%. The PIFs exhibited exceptional thermal insulation performance with thermal conductivity values ranging from 0.0276 to 0.0517 W/ (m & sdot;K) between 25 and 300 degrees C. Additionally, the PIFs demonstrated excellent irradiation tolerance, with the mechanical and thermal stability retention rate being above 96% after the irradiation experiment (radiation dosage: 1.15 x 105 Gy) using 60Co source. Thus, lightweight PIFs with superior high temperature thermal insulation performance, flame retardancy and irradiation tolerance were successfully prepared, which showed potential applications in aerospace, medical and nuclear power sectors.

Lightweight Polyimide/silica Aerogel Composite Foams and Their Derived Carbon Foams for Excellent Flame Retardancy, Thermal Insulation and EMI Shielding Performance

Lightweight Polyimide Composite Foams with Anisotropic Hierarchical Pore Structure for Enhanced Mechanical, Flame Retardancy and Thermal Insulation Purposes

Fabrication of Thermally Resistant and Mechanically Flexible Polyimide Foams with Anisotropic Pore Structures for Thermal Insulation and Irradiation Tolerance Applications

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Lightweight, Robust, and Multifunctional Polyimide-Based Carbon Foams for Electromagnetic Interference Shielding and Thermal Insulation

Fabrication of Flexible Polyimide/rgo Composite Foams and Their Derived Carbon Foams for Thermal Insulation and EMI Shielding Applications

Lightweight, Radiation-Resistant, and Flexible Polyimide Foams with an Anisotropic Porous Structure for Efficient Thermal Insulation Applications

Lightweight Polyimide-Derived Carbon Foams with Anisotropic Porous Structures Prepared by Microwave-Assisted Foaming and Carbonization for Thermal Insulation and EMI Shielding Applications

Multifunctional Microcellular PVDF/Ni-chains Composite Foams with Enhanced Electromagnetic Interference Shielding and Superior Thermal Insulation Performance

Combining Microwave‐assisted Foaming and Post Curing Process to Prepare Lightweight Flexible Polyimide Foams for Thermal Insulation Applications

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Microwave-Assisted Foaming of Mechanically Robust Lightweight Polyimide Foams with Anisotropic Pore Structures for Thermal Insulation Applications

Preparation and properties of polyimide/chopped carbon fiber composite foams

Investigation on Polyimide/Silica Hybrid Foams and Their Erosion Resistance to Atomic Oxygen

A novel phosphorus-modified silica aerogel for simultaneously improvement of flame retardancy, mechanical and thermal insulation properties in rigid polyurethane foam

Hierarchically Porous SiO2/polyurethane Foam Composites Towards Excellent Thermal Insulating, Flame-Retardant and Smoke-Suppressant Performances.

Efficient Flame-Retardant and Multifunctional Polyimide/mxene Composite Aerogel for Intelligent Fire Protection

Fabrication of flame-retardant and smoke-suppressant isocyanate-based polyimide foam modified by silica aerogel thermal insulation and flame protection layers

Anisotropic Polyimide/Cellulose Nanofibril Composite Aerogels for Thermal Insulation and Flame Retardancy

Hybrid Polyimide Foams with Hyperbranched Organosilicon for High-Temperature Sound Absorption