Abstract:Radiation heat transfer is the dominant model of heat transfer in the large scale industry boiler, especially in oxy-fuel combustion condition. Radiative properties of combustion gases and char oxidation in the oxy-fuel condition are obviously different from the air-fuel combustion, due to the N-2 replaced by CO2. Through researchers proposed many helpful correlations based on the air-fuel Weighted-Sum-of-Grey Gases-Model (WSGGM), the absorption coefficients were commonly constant or correlations were discrete by the classical molar ratio of H2O to CO2 (MR), which were mismatching the continuous value of MR in the real furnace. Meanwhile, the discrete MR is also not applied to the computational fluid dynamics (CFD). In this paper, new correlations for the WSGGM are determined as polynomial function of MR and temperature, which can be conveniently employed in Fluent by the form of user-defined-functions in C language. Parameters of model are fitted by total emittances calculated based on the timely HITEMP 2010 database. New correlations are validated by comparing the emittances with line-by-line calculations and other classical models. New correlations are employed in the CFD for the real industrial oxy-fuel combustion with the temperature range of 400-2600K, pressure path-length between 0.01 and 60 bar m. Several assumed test cases have been investigated to evaluate the accuracy of the models. Modified correlations for WSGGM give a better accuracy of the total emittances for the mixed combustion gases in the real furnace. New models including radiative and chemical reaction mechanisms have been employed to CFD modeling of combustion process for a tangentially fired 300MWe utility boiler. The industrial boiler is modeled by a partition meshing method with the hexahedral structured mesh. Due to the atmosphere shift from N-2 to CO2, three aspects are essential to be modified for oxy-fuel: radiation model, char oxidation model and homogeneous volatile oxidation model. To investigate the performance of the furnace, air-fuel combustion selected as the conference, three other cases employed are defined as Oxy21 (vol21%, O-2), Oxy26 (vol26, 02) and Oxy29 (vol29%, O-2), respectively. Temperature profile and heat transfer are investigated for the different test cases. Meanwhile, the simulation and calculation heat transfer in the furnace are also compared. The results show the new modified simulation has an approximate 4-11% lower than the thermodynamic calculation. To achieve an identical heat flux and temperature distributions with the air-fuel case, the molar fraction 29% of O-2 is essential for the selected implementation. (CSPE)

New Multi-Parametrical Pressurized WSGG Model Correlations for Gaseous Radiative Heat Transfer in High H2O/CO2 Molar Ratio Conditions for Sustainable Fuel Utilization

New multi-parametrical pressurized WSGG model correlations for gaseous radiative heat transfer in high H 2 O/CO 2 molar ratio conditions for sustainable fuel utilization

New WSGG Model for Gas Mixtures of H2O, CO2, and CO in Typical Coal Gasifier Conditions

WSGG Models for Radiative Heat Transfer Calculations in Hydrogen and Hydrogen-Mixture Flames at Various Pressures

A New WSGG Radiation Model of CO/CO2 Mixed Gas for Solar-Driven Coal/biomass Fuel Gasification

New coefficients of the weighted-sum-of-gray-gases model for gas radiation characteristics of hydrogen/natural gas blends combustion

New Pressurized WSGG Model and the Effect of Pressure on the Radiation Heat Transfer of H2O/CO2 Gas Mixtures

Radiative Models For Hot Gas With Various H2o-Co2 Ratios

A full spectrum<i>k</i>-distribution-based weighted-sum-of-gray-gases model for pressurized oxy-fuel combustion

New Correlations Of Weighted Sum Of Grey Gases Model Applicable To Computational Fluid Dynamics For Oxy-Fuel Combustion And Implementation

New Weighted-Sum-of-gray-gases Model for Typical Pressurized Oxy-Fuel Conditions

A Full Spectrum K-Distribution Based Weighted-Sum-of-gray-gases Model for Oxy-Fuel Combustion

Comprehensive Evaluation and Analysis of the Weighted-Sum-Of-Gray-Gases Radiation Model

New Weighted Sum of Gray Gases (WSGG) Models for Radiation Calculation in Carbon Capture Simulations: Evaluation and Different Implementation Techniques

Effects of Gas Models on Radiative Heat Transfer in the Combustion Chamber of a Hydrogen Gas Turbine

New gas radiation model based on the principle of weighted sum of gray gases. Application to CO2–H2O mixtures at high temperature

Assessment of weighted-sum-of-gray-gases models for gas-soot mixture in jet diffusion flames

Numerical Analysis of Radiative Heat Transfer in an Inhomogeneous and Non-Isothermal Combustion System Considering H2O/CO2/CO and Soot

Effects of Total Pressure on Non-Grey Gas Radiation Transfer in Oxy-Fuel Combustion Using the LBL, SNB, SNBCK, WSGG, and FSCK Methods

Calculations of Radiative Heat Transfer in an Axisymmetric Jet Diffusion Flame at Elevated Pressures Using Different Gas Radiation Models

A Numerical Study on the Thermal Conductivity of H2O/CO2/H2 Mixtures in Supercritical Regions of Water for Coal Supercritical Water Gasification System