Abstract:The understanding and development of stable redox materials based on cheap and abundant elements, forming Ca-Mn-Ti-Fe-O-based perovskites, have been in focus for applications in renewable technologies such as chemical looping combustion and thermal energy storage. The present research focuses on developing stable materials to be utilized up to 1050 °C in a CLC process and has shown that the structure stability and oxygen transfer capacity can be achieved by tuning the content of different elements on B-sites of the perovskites. Various experiments, such as redox cycling under various fuels, temperatures, and pO2, were carried out to evaluate the oxygen transfer capacity, reaction rates under various fuels, etc. The redox stability at high temperatures was evaluated by redox cycles at 1050 °C followed by post SEM analyses on surface and depth profiling. The three developed materials can avoid phase change during redox due to the moderate oxygen transfer capacity of up to 5.6 wt % O2 for CaMn0.5Ti0.375Fe0.125O3-δ at 1050 °C, which is important for having stable particles. Cation diffusion was also investigated during redox cycling in the development of stable redox materials, and only a minor diffusion of Mn to the grain boundaries is seen in the least stable material. The findings show that perovskites with high stability can be obtained with more Ti on B-sites, termed as CaMn0.375Ti0.5Fe0.125O3-δ. The developed stable oxides, to some extent, have a reduced activity compared to the less stable composition with less Ti and more Mn, termed as CaMn0.5Ti0.375Fe0.125O3-δ, which possesses a higher oxygen release to inert ca. 1.1 wt % O2 compared to more stable CaMn0.375Ti0.5Fe0.125O3-δ that can release up to 0.8 wt % O2. Two of the materials have faster kinetics than ilmenite by a factor of 2 in H2.

Tailoring Catalytic and Oxygen Release Capability in LaFe1–xNixO3 to Intensify Chemical Looping Reactions at Medium Temperatures

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

LaFe0.8Co0.15Cu0.05O3 Supported on Silicalite-1 as a Durable Oxygen Carrier for Chemical Looping Reforming of CH4 Coupled with CO2 Reduction

Enhanced Resistance to Carbon Deposition over LaxCe1–xFexNi1–xO3 Oxygen Carrier for Chemical Looping Reforming

Oxygen activity regulation over LaNiO 3 perovskites by Ti substitution for chemical looping partial oxidation of methane

Self-generated Ni Nanoparticles/lafeo3 Heterogeneous Oxygen Carrier for Robust CO2 Utilization under a Cyclic Redox Scheme

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

Chemical-looping Reforming of Methane over La-Mn-Fe-O Oxygen Carriers: Effect of Calcination Temperature

Oxygen Activity Tuning via FeO 6 Octahedral Tilting in Perovskite Ferrites for Chemical Looping Dry Reforming of Methane

From lab to industry: Scaling-up Fe-Ni bimetallic nano oxygen carrier for mid-temperature methane chemical looping reforming

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

LaFe1-xNix As a Robust Catalytic Oxygen Carrier for Chemical Looping Conversion of Toluene

Pressure‐Induced Enhancement in Chemical Looping Reforming of CH4 : A Thermodynamic Analysis with Fe‐Based Oxygen Carriers

Chemical Looping Conversion of Methane via Fe2O3-LaFeO3 Calcined from LaFe-MOF Precursor

Performance of LaNixFe1-xO3 as Oxygen Carriers in Chemical-Looping Combustion Reaction

A High-Performance Oxygen Carrier with High Oxygen Transport Capacity and Redox Stability for Chemical Looping Combustion

Thermochemically Stable Novel Oxygen Carriers Based on CaMn1- x- y Ti x Fe y O3-δ for Chemical Looping

Near 100% CO selectivity in nanoscaled iron-based oxygen carriers for chemical looping methane partial oxidation

Zeolites Boost the Reactivity of Chemical Looping by Brønsted Acid Sites

Plasma-Assisted Chemical Looping Oxidative Coupling of Methane over LaMnO 3 at 400 °C

In-situ Metal Doping to Boost the Reactivity of Layered Double Hydroxide Derived Mg-Fe-Al-O Oxygen Carriers for Chemical Looping CH4 Reforming with CO2 Reduction