Straw Movement and Flow Field in a Crushing Device Based on CFD-DEM Coupling with Flexible Hollow Straw Model

Weixun Li,Fubin Zhang,Zhitao Luo,Enlai Zheng,Dongchuan Pan,Jin Qian,Haoping Yao,Xiaochan Wang

DOI: https://doi.org/10.1016/j.biosystemseng.2024.04.018

IF: 5.002

2024-01-01

Biosystems Engineering

Abstract:To accurately predict and evaluate the performance of the crushing device of no-till planter, it is strongly necessary to establish an accurate interaction model of the straw-crushing device coupling system. The traditional model has low prediction accuracy and cannot simulate the fracture characteristics of the straw during the operation of the crushing device due to the straw being usually regarded as a rigid body or a combination of rigid ball joints. In this paper, a breakable and flexible hollow straw model is first proposed and a CFD-DEM coupling model of the straw group-crushing device considering the effect of gas-solid two phase is also established. Afterwards, the corresponding verification experiments are conducted and the effect of working and structural parameters on the straw-throwing weight and crushing length is also analysed. It is demonstrated that the relative error between the simulation results and the experimental results for the straw crushing length is 7.7%, and the relative error for the straw-throwing weight is 7.1%, thereby verifying the correctness of the CFD-DEM model. Finally, the response surface method is also used to determine the optimal working and structural parameters of the crushing device and corresponding field tests verification is also conducted. Results indicate that the optimal parameter combination is as: the rotational speed of the crushing spindle is 2400 rpm, the inlet clearance is 30 mm and the starting point angle is 45 degrees. Moreover, the crushing length after optimisation is 6.6% smaller than before optimisation, and the straw-throwing weight is increased by 11.5%.