Abstract:With the help of the Kirkendall effect at the SiO/SiO2 interface, multi‐Si‐void@SiO2 can be obtained by simply heat treating Si powder in air at ≈950 °C for an appropriate time. The electrode made by mixing multi‐Si‐void@SiO2 and commercial carbon (mass ratio, 1:1) delivers a specific capacity of 1440 mAh g−1 at 1.2 A g−1 after 500 cycles. The core‐void@shell architecture shows great advantages in enhancing cycling stability and high‐rate performance of Si‐based anodes. However, it is usually synthesized by template methods which are complex and environmentally unfriendly and would lead to low‐efficiency charge and mass exchange because of the single‐point van der Waals contact between the Si core and the shell. Here, a facile and benign one‐step method to synthesize multi‐Si‐void@SiO2 structure, where abundant void spaces exist between multiple Si cores that are multi‐point attached to a SiO2 shell through strong chemical bonding, is reported. The corresponding electrode exhibits highly stable cycling stability and excellent electrochemical performance. After 200 cycles at a current density of 0.1 A g−1 and then another 200 cycles at 1.2 A g−1, the electrode outputs a specific capacity of 1440 mAh g−1. Even at 2.0 A g−1, it outputs a specific capacity as high as 1182 mAh g−1. Such an anode can match almost all the cathode materials presently used in lithium‐ion batteries. These results demonstrate the multi‐Si‐void@SiO2 as a promising anode to be used in future commercial lithium‐ion batteries of high energy density and high power density.

One-step Chemical Vapor Deposition Synthesis of Si NWs@C Core/shell Anodes Without Additional Catalysts by the Oxide-Assisted Growth Mechanism for Lithium-Ion Batteries

One-step Chemical Vapor Deposition Synthesis of Si NWs@C core/shell anode without additional catalysts by the Oxide-Assisted Growth mechanism for Lithium-ion Batteries

CoO/NiSi(x) Core-Shell Nanowire Arrays As Lithium-Ion Anodes with High Rate Capabilities.

A novel Co-Li2O@Si core-shell nanowire array composite as a high-performance lithium-ion battery anode material.

Synthesis of Core–shell Architectures of Silicon Coated on Controllable Grown Ni-silicide Nanostructures and Their Lithium-Ion Battery Application

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

Facile Synthesis of Uniform Mwcnt@Si Nanocomposites As High-Performance Anode Materials for Lithium-Ion Batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

SiC@Si core–shell nanowires on carbon paper as a hybrid anode for lithium-ion batteries

One‐Step Synthesis of Multi‐Core‐Void@Shell Structured Silicon Anode for High‐Performance Lithium‐Ion Batteries

Preparation of Silicon@Silicon Oxide Core-Shell Nanowires from A Silica Precursor Toward A High Energy Density Li-Ion Battery Anode

Si@Nitrogen-Doped Carbon Nanoparticles for Lithium-Ion Battery Anodes

Self-sacrificed synthesis of carbon-coated SiOx nanowires for high capacity lithium ion battery anodes

Directing Silicon-Graphene Self-Assembly As a Core/shell Anode for High-Performance Lithium-Ion Batteries.

Cu-Li2o@Si Core-Shell Nanowall Arrays: Facile Voltage-Controlled Synthesis and Enhanced Lithium-Storage Capabilities

Silicon Nanowires with and Without Carbon Coating As Anode Materials for Lithium-Ion Batteries

Surface-coating Regulated Lithiation Kinetics and Degradation in Silicon Nanowires for Lithium Ion Battery.

A Novel Approach to Synthesize Micrometer-Sized Porous Si/SiOx@C with Internally and Externally Interweaved CNTs As a High Performance Anode for Lithium-Ion Batteries

Synergistically Reinforced Lithium Storage Performance of in Situ Chemically Grown Silicon@silicon Oxide Core–shell Nanowires on Three-Dimensional Conductive Graphitic Scaffolds

One-step Synthesis of SnCo Nanoconfined in Hierarchical Carbon Nanostructures for Lithium Ion Battery Anode

Ionic Liquid Assist to Prepare Si@N-doped Carbon Nanoparticles and Its High Performance in Lithium Ion Batteries