Highly Selective Granulation Adsorbents for Lithium Recovery from Gas Field Brine: Selectivity, Kinetics and Mechanism

Muhua Zhao,Jinyi Luan,Chong Zhao,Yang Zhang,Guoyuan Pan,Xinmiao Zhang,Yiqun Liu

DOI: https://doi.org/10.1016/j.desal.2024.117699

IF: 11.211

2024-01-01

Desalination

Abstract:Polyvinyl chloride (PVC)-based granulated adsorbents with high mechanical stability have proven effective for extracting lithium from salt lake brine on a commercial scale. However, granular materials with high adsorption selectivity for Na + /Li + separation and long service life still remain a great challenge. Here, we prepared granulated spherical adsorbents by a phase conversion method using PVC as a binder; PEG, PMMA, PAN, and PAA as hydrophilic co -binders; and Li 1.33 Mn 1.67 O 4 (LMO) as a powder adsorbent. Among these materials, P-PAA exhibited excellent hydrophilicity and excellent binder compatibility, facilitating the dispersion of LMO powders and ensuring high adsorption. Moreover, the mechanism of action of the PVC/PAA binders was first explored via experiments and simulations, which revealed that Li + migration was promoted and occurred primarily on LMO rather than on binders, so nonselective adsorption decreased. Therefore, P-PAA demonstrated exceptional Li + adsorption capacity (12.9 mg/g) and selectivity for Li + (distribution factor of 1391.3 mL/g) over other coexisting cations and a separation factor of alpha Li Na = 718, which are greater than those of other adsorbents reported in the literature. Furthermore, the unique structure of P-PAA, which was obtained by interconnecting larger core pores (5 - 10 mu m) and abundant smaller pores (0.5 - 1 mu m), accelerated the water/ion transfer kinetics without causing powder leakage. Hence, the lifespan of these materials has been extended, as salt crystals or internal cracks did not form during long-term cyclic use, unlike in the case of other granules. All of the above factors made P-PAA effectively recover Li + from Puguang gas brine, which contains a high sodium salt content and organic pollutants, with an efficiency of 98.4 %. All these properties demonstrate that P-PAA could be used in an appealing and competitive manner for industrial processes.