Abstract:Excellent optical absorbers are always characterized by high quality factors and perfect absorption; however, these absorbers usually suffer from the ohmic losses due to conventional surface plasmon resonance, which limits their absorption performance in practical applications. To address the problem, a tunable bound state in the continuum (BIC) based on Fabry-Perot cavity is proposed in this paper. Figures 1(a) shows the structural model of the designed Fabry-Perot cavity absorber, which consists of Ag as the substrate, a layer of the dielectric material Al 2 O 3 above the Ag, and a high-refractive-index grating as the top dielectric layer Si ridge. By adjusting the thickness parameter d of Al 2 O 3 , the conversion of BIC and q-BIC is achieved in this paper, and when d is increased from 273 nm to 298 nm, the BIC can be transformed into quasi-BIC, and the perfect absorption of the absorber in the continuum spectrum can be increased to 100%, as shown in Figs. (b) and (c). In this paper, the factors affecting the perfect absorption are explored by using the interference theory; theoretical calculations of the quasi-BIC are carried out by using the coupled mode theory and impedance matching theory; the physical mechanism of the BIC is explained by using the electric and magnetic field theory, and the BIC is caused by the electric and magnetic dipole modes as well as the mirror image of the base Ag, which causes the interferential phase cancellation effect. Compared with the conventional absorber, the absorber has excellent structural parameter robustness and a wide range of BIC modulation. More importantly, the absorber has excellent sensing performance with a maximum sensitivity up to 34 nm/RIU and a maximum quality factor of 9.5. Last but not least, the absorber also achieves dual-frequency open-light performance, where the maximum modulation depth and the minimum insertion loss of the dual-frequency switch are 99.4% and 0.0004 dB, respectively. These findings have important implications in the fields of photonics, optical communications, and sensor technology.

Inverse Design of Quasi-Bound States in the Continuum Absorber

Inverse Design of Metamaterial Bound States in the Continuum Device via Coupled Mode Theory

Quasi-BIC-Based High-Q Perfect Absorber with Decoupled Resonant Wavelength and Q Factor

Bound states in the continuum enabling ultra-narrowband perfect absorption

Quasi-bound States in the Continuum in Metal Complementary Periodic Cross-Shaped Resonators at Terahertz Frequencies.

Flat Bands and Quasi-Bound States in the Continuum in a Photonic Moiré Lattice

Quasibound States in the Continuum in Terahertz Free-Standing Metal Complementary Periodic Cross-Shaped Resonators

Dual-mode tunable absorber based on quasi-bound states in the continuum

Coupling-Assisted Quasi-Bound States in the Continuum in Heterogeneous Metasurfaces

Super Quasibound State in the Continuum

Investigation of Quasi-Bound States in the Continuum in Terahertz Metal Complementary Periodic Cross-Shaped Resonators

Quasi-bound States in the Continuum with a Stable Resonance Wavelength in Dimer Dielectric Metasurfaces

Bound States in the Continuum in All-Dielectric Metasurfaces with Scaled Lattice Constants

Tunable bound states in the continuous domain based on Fabry-Perot cavities and application studies

Quasi-bound states in the continuum induced by C4v structure

Observation of the Bound States in the Continuum Supported by Mode Coupling in a Terahertz Metasurface.

Quasi-BIC-governed light absorption of monolayer transition-metal dichalcogenide-based absorber and its sensing performance

Super quasi-bound state in the continuum

Bound States in the Continuum in Metal–dielectric Photonic Crystal with a Birefringent Defect

Friedrich-Wintgen bound states in the continuum in dimerized dielectric metasurfaces

Quasi-bound states in the continuum induced by in-plane and out-of-plane asymmetry in all-dielectric metasurfaces