Abstract:Excellent optical absorbers are always characterized by high quality factors and perfect absorption; however, these absorbers usually suffer from the ohmic losses due to conventional surface plasmon resonance, which limits their absorption performance in practical applications. To address the problem, a tunable bound state in the continuum (BIC) based on Fabry-Perot cavity is proposed in this paper. Figures 1(a) shows the structural model of the designed Fabry-Perot cavity absorber, which consists of Ag as the substrate, a layer of the dielectric material Al 2 O 3 above the Ag, and a high-refractive-index grating as the top dielectric layer Si ridge. By adjusting the thickness parameter d of Al 2 O 3 , the conversion of BIC and q-BIC is achieved in this paper, and when d is increased from 273 nm to 298 nm, the BIC can be transformed into quasi-BIC, and the perfect absorption of the absorber in the continuum spectrum can be increased to 100%, as shown in Figs. (b) and (c). In this paper, the factors affecting the perfect absorption are explored by using the interference theory; theoretical calculations of the quasi-BIC are carried out by using the coupled mode theory and impedance matching theory; the physical mechanism of the BIC is explained by using the electric and magnetic field theory, and the BIC is caused by the electric and magnetic dipole modes as well as the mirror image of the base Ag, which causes the interferential phase cancellation effect. Compared with the conventional absorber, the absorber has excellent structural parameter robustness and a wide range of BIC modulation. More importantly, the absorber has excellent sensing performance with a maximum sensitivity up to 34 nm/RIU and a maximum quality factor of 9.5. Last but not least, the absorber also achieves dual-frequency open-light performance, where the maximum modulation depth and the minimum insertion loss of the dual-frequency switch are 99.4% and 0.0004 dB, respectively. These findings have important implications in the fields of photonics, optical communications, and sensor technology.

Quasi-BIC-Based High-Q Perfect Absorber with Decoupled Resonant Wavelength and Q Factor

Temperature-controlled Optical Switch Metasurface with Large Local Field Enhancement Based on FW-BIC

Tunable bound states in the continuous domain based on Fabry-Perot cavities and application studies

Enabling infinite $Q$ factors in absorbing optical systems

Near-perfect absorption of a honeycomb metasurface through QBICs

Dual-mode tunable absorber based on quasi-bound states in the continuum

High-Q All-Dielectric Metasurface: Super and Suppressed Optical Absorption

Diffractive Broadband Coupling into High-Q Resonant Cavities

Flexible terahertz metasurface absorbers empowered by bound states in the continuum

High-Q Absorption in All-Dielectric Photonics Assisted by Metamirrors

Bound states in the continuum enabling ultra-narrowband perfect absorption

Quasi-BIC-governed light absorption of monolayer transition-metal dichalcogenide-based absorber and its sensing performance

Backend-Balanced-Impedance Concept for Reverse Design of Ultra-Wideband Absorber

Ultra Narrow Dual-Band Perfect Absorber Based on a Dielectric−Dielectric−Metal Three-Layer Film Material

A Novel Coupled Quantum Well Structure with Large Field-Induced Refractive Index Change and Low Absorption Loss at 1.55 ?M

Active quasi-BIC metasurfaces assisted by epsilon-near-zero materials.

Magneto-optical metasurfaces for high-Q perfect absorption with quasi-bound states in the continuum

Quasi-3D Perfect Absorber Based on the Self-Similar Parasitic Elements as an Optical Sensor with Tunable Attributes for Near-Infrared Application

An Enhanced High Q-Factor Resonance of Quasi-Bound States in the Continuum With All-Dielectric Metasurface Based on Multilayer Film Structures

High-Q Quasibound States in the Continuum for Nonlinear Metasurfaces