Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

Prestress Iterative Design and Precision Control Method for Cable-strut Structures Using Enhanced Differential Evolution

Calculation of prestress distribution for large-span cable-strut tensile structures

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Non-Linear Displacement Control of Prestressed Cable Structures

Optimal Prestress Design and Construction Technique of Cable-Strut Tension Structures with Multi-Overall Selfstress Modes

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Shape and Force Control of Prestressed Cable-Strut Structures Based on Nonlinear Force Method

A Feasible Symmetric State of Initial Force Design for Cable-Strut Structures

Force Method for Displacement Adjustment of Prestressed Cable Structures with Dynamic Relaxation Method

Analysis method of cable's prestressing force correction construction for prestressed space structures

Machine Learning-Based Multi-Objective Prestress Optimization Framework of Suspend Dome Structure and Case Study

A Robust Method for Pre-Stress Adjustment of Cable-Strut Structures Based on Sparse Regression

Selfstress mode analysis and optimal prestress design of cable-strut tension structures

Tension Control and Multi-Objective Optimization of Tensile Cable Net Structure Construction

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Application and analysis of cables in light structures

Prestress design of spatial cable-truss tensile structures with annular plane

OPTIMAL ANALYSIS OF TENSIONING CABLES FOR PRESTRESSED STEEL STRUCTURE BASED ON IMPROVED GENETIC ALGORITHM

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Design Optimisation of a Cable-Strut Tensile Structure According to the Importance of Elements