Abstract:Purpose Hydrofracturing technology has been widely used in tight oil and gas reservoir exploitation, and the fracture network formed by fracturing is crucial to determining the resources recovery rate. Due to the complexity of fracture network induced by the random morphology and type of fluid-driven fractures, controlling and optimising its mechanisms is challenging. This paper aims to study the types of multiscale mode I/II fractures, the fluid-driven propagation of multiscale tensile and shear fractures need to be studied. Design/methodology/approach A dual bilinear cohesive zone model (CZM) based on energy evolution was introduced to detect the initiation and propagation of fluid-driven tensile and shear fractures. The model overcomes the limitations of classical linear fracture mechanics, such as the stress singularity at the fracture tip, and considers the important role of fracture surface behaviour in the shear activation. The bilinear cohesive criterion based on the energy evolution criterion can reflect the formation mechanism of complex fracture networks objectively and accurately. Considering the hydro-mechanical (HM) coupling and leak-off effects, the combined finite element-discrete element-finite volume approach was introduced and implemented successfully, and the results showed that the models considering HM coupling and leak-off effects could form a more complex fracture network. The multiscale (laboratory- and engineering-scale) Mode I/II fractures can be simulated in hydrofracturing process. Findings Based on the proposed method, the accuracy and applicability of the algorithm were verified by comparing the analytical solution of KGD and PKN models. The effects of different in situ stresses and flow rates on the dynamic propagation of hydraulic fractures at laboratory and engineering scales were investigated. when the ratio of in situ stress is small, the fracture propagation direction is not affected, and the fracture morphology is a cross-type fracture. When the ratio of in situ stress is relatively large, the propagation direction of the fracture is affected by the maximum in situ stress, and it is more inclined to propagate along the direction of the maximum in situ stress, forming double wing-type fractures. Hydrofracturing tensile and shear fractures were identified, and the distribution and number of each type were obtained. There are fewer hydraulic shear fractures than tensile fractures, and shear fractures appear in the initial stage of fracture propagation and then propagate and distribute around the perforation. Originality/value The proposed dual bilinear CZM is effective for simulating the types of Mode I/II fractures and seizing the fluid-driven propagation of multiscale tensile and shear fractures. Practical fracturing process involves the multi-type and multiscale fluid-driven fracture propagation. This study introduces general fluid-driven fracture propagation, which can be extended to the fracture propagation analysis of potential fluid fracturing, such as other liquids or supercritical gases.

Complex Fluid‐Driven Fractures Caused by Crack‐Parallel Stress

Impact of stress-driven crack growth on the emergence of anomalous transport in critically connected natural fracture networks

Effect of Mesoscopic Structure on Hydro-Mechanical Properties of Fractures

Modeling of Flow Characteristics in 3D Rough Rock Fracture with Geometry Changes under Confining Stresses

Mesoscopic Deformation of a Hydraulic and Mechanical Aperture of a Single Fracture under Normal Stress

Dynamics of fluid-driven fractures across material heterogeneities

Modeling Interactions between Hydraulic and Closed Natural Fractures in Brittle Crystalline Rocks: A Fluid–Solid Coupling Grain-Based Approach for Characterizing Microcracking Behaviors

Analytical solution of coupled stress-flow-transport processes in a single rock fracture

Influence of Pore Pressure on Tensile Fracture Growth in Rocks: a New Explanation Based on Numerical Testing

Shear-flow coupling characteristics of a three-dimensional discrete fracture network-fault model considering stress-induced aperture variations

A Dynamic Propagation Numerical Model of Hydraulic Fracture Interactions with Pre-Existing Complex Natural Fractures

An Efficient Computational Model for Simulating Stress-dependent Flow in Three-dimensional Discrete Fracture Networks

Anomalous transport and upscaling in critically-connected fracture networks under stress conditions

Channeling flow and anomalous transport due to the complex void structure of rock fractures

Fluid-driven Fractures in Granular Materials

Influence of Single Fracture Inclination on Fault Activation

Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir

Modelling of hydro-mechanical coupling and transport in densely fractured rock mass

Modeling of fracture geometry alteration and fracture flow evolution under geostress and water-rock interaction

DEM Modeling of Simultaneous Propagation of Multiple Hydraulic Fractures Across Different Regimes, from Toughness- to Viscosity-Dominated

Fracture Spacing Behavior in Layered Rocks Subjected to Different Driving Forces: a Numerical Study Based on Fracture Infilling Process