Abstract:Purpose Hydrofracturing technology has been widely used in tight oil and gas reservoir exploitation, and the fracture network formed by fracturing is crucial to determining the resources recovery rate. Due to the complexity of fracture network induced by the random morphology and type of fluid-driven fractures, controlling and optimising its mechanisms is challenging. This paper aims to study the types of multiscale mode I/II fractures, the fluid-driven propagation of multiscale tensile and shear fractures need to be studied. Design/methodology/approach A dual bilinear cohesive zone model (CZM) based on energy evolution was introduced to detect the initiation and propagation of fluid-driven tensile and shear fractures. The model overcomes the limitations of classical linear fracture mechanics, such as the stress singularity at the fracture tip, and considers the important role of fracture surface behaviour in the shear activation. The bilinear cohesive criterion based on the energy evolution criterion can reflect the formation mechanism of complex fracture networks objectively and accurately. Considering the hydro-mechanical (HM) coupling and leak-off effects, the combined finite element-discrete element-finite volume approach was introduced and implemented successfully, and the results showed that the models considering HM coupling and leak-off effects could form a more complex fracture network. The multiscale (laboratory- and engineering-scale) Mode I/II fractures can be simulated in hydrofracturing process. Findings Based on the proposed method, the accuracy and applicability of the algorithm were verified by comparing the analytical solution of KGD and PKN models. The effects of different in situ stresses and flow rates on the dynamic propagation of hydraulic fractures at laboratory and engineering scales were investigated. when the ratio of in situ stress is small, the fracture propagation direction is not affected, and the fracture morphology is a cross-type fracture. When the ratio of in situ stress is relatively large, the propagation direction of the fracture is affected by the maximum in situ stress, and it is more inclined to propagate along the direction of the maximum in situ stress, forming double wing-type fractures. Hydrofracturing tensile and shear fractures were identified, and the distribution and number of each type were obtained. There are fewer hydraulic shear fractures than tensile fractures, and shear fractures appear in the initial stage of fracture propagation and then propagate and distribute around the perforation. Originality/value The proposed dual bilinear CZM is effective for simulating the types of Mode I/II fractures and seizing the fluid-driven propagation of multiscale tensile and shear fractures. Practical fracturing process involves the multi-type and multiscale fluid-driven fracture propagation. This study introduces general fluid-driven fracture propagation, which can be extended to the fracture propagation analysis of potential fluid fracturing, such as other liquids or supercritical gases.

Fluid-driven Fractures in Granular Materials

Laboratory Simulation of Flow Through Rough-Walled Microfractures under High Hydraulic Gradient

Fluid-solid-phase multi-field coupling modeling method for hydraulic fracture of saturated brittle porous materials

Modeling Interactions between Hydraulic and Closed Natural Fractures in Brittle Crystalline Rocks: A Fluid–Solid Coupling Grain-Based Approach for Characterizing Microcracking Behaviors

Modeling Injection-Induced Fracture Propagation in Crystalline Rocks by a Fluid–Solid Coupling Grain-Based Model

Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir

Pore-scale modeling of hydromechanical coupled mechanics in hydrofracturing process: Mechanics in Hydrofracturing

Quantitative Assessments on Fluid Flow Through Fractures Embedded in Permeable Host Rocks: Experiments and Simulations

Simulation of dynamic pulsing fracking in poroelastic media by a hydro-damage-mechanical coupled cohesive phase field model

A Hybrid Finite Volume and Extended Finite Element Method for Hydraulic Fracturing with Cohesive Crack Propagation in Quasi-Brittle Materials

Micro Mechanism Investigation of Hydraulic Fracturing Process Based a Fluid-Solid Coupling Discrete Element Model

A Fully Coupled Hydro-Mechanical Material Point Method for Saturated Dense Granular Materials

Crossover from viscous fingering to fracturing in cohesive wet granular media: a photoporomechanics study

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Fluid‐Driven Particle Migration and Its Impact on Hydraulic Transmissivity of Stressed Filled Fractures

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

Fluid-driven cracking behavior of coal with prefabricated plane: a particle-based hydro-mechanical coupled numerical investigation

A hydro-mechanical-damage fully coupled cohesive phase field model for complicated fracking simulations in poroelastic media

Numerical insight into hydraulic fracture propagation in hot dry rock with complex natural fracture networks via fluid-solid coupling grain-based modeling

Fluid-Driven Instabilities in Granular Media: From Viscous Fingering and Dissolution Wormholes to Desiccation Cracks and Ice Lenses