Abstract:Urban underground engineering is generally buried at a shallow depth and suffers long-term environmental water effects such as rainfall, rivers, underground pipeline leakage, and groundwater. The mechanical properties of the structures are affected by constant deterioration, which seriously hinders the safe, healthy, and sustainable development of the city. On the basis of on-site investigation of civil defense engineering, this article simulates the water environment conditions of mortar in underground engineering in the laboratory and conducts manual sample preparation in the laboratory. Then, water, H2CO3, NaCl, and Na2CO3 solution or wet–dry cycles are used to corrode the sample, respectively. A uniaxial compression test, Brazilian splitting test, analyses of the acoustic emission signals and electromagnetic signals, and magnetic imaging testing are performed, respectively. The results show that an increase in the action time of environmental water leads to a gradual increase in the uniaxial compressive strength, tensile strength, and elastic modulus of cement mortar, but it will decrease over a long period of time. Different environmental water components can also lead to a different performance of soaked mortar. The uniaxial compressive strength R, tensile strength σt, and elastic modulus E of mortar samples exhibit values in different solutions in the order of H2CO3 solution<NaCl solution<Na2CO3 solution<water. A moderate solution soak time can enhance the mechanical properties of the mortar, but this effect decreases at long time scales. The effect of wet–dry cycles on the mechanical properties and degradation process of mortar is significant. With the increase in wet–dry cycles, the porosity of mortar continuously increases. The cumulative ringing count, energy, amplitude, and impact number of acoustic emission signals always increase when the samples are loaded to failure. The uniaxial compressive strength, tensile strength, and elastic modulus first increase and then decrease. The experimental results lay the foundation for further investigating the performance changes in mortar under complex water environments in underground engineering.

Filling Performance of Self-Protecting Underwater Mortar Via Aggregate Interstices in the Water Environment

Investigation of the Filling-Overflow Behavior of Corrosion Products in Reinforced Mortar

Research on the Permeability and Pore Structure Distribution Characteristics of High-Performance Mortar for Surface Treatment of Bridge Piers and Columns

Effect of Paste Fluidity and Paste-to-Aggregate Ratio on the Strength and Permeability of Porous Mortar from Manufactured Sand

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment

Experimental Study on the Effect of Environmental Water on the Mechanical Properties and Deterioration Process of Underground Engineering Masonry Mortar

Effect of the entrained air void on strength and interfacial transition zone of air-entrained mortar

Experimental Study on the Mix Proportion and Mechanical Properties of New Underwater Cementitious Filling Materials

Study of the Anti-Penetration Performance of Concrete with Different Coarse Aggregate Content

Compactness and hardened properties of machine-made sand mortar with aggregate micro fines

Investigation of the pore structure performance of cementitious dune sand mortar manufacturing with crushed ceramic waste

Influence of Seawater and Sea Sand on the Performance of Anti-Washout Underwater Concrete: The Overlooked Significance of Mg2+

A meso-scale model toward concrete water permeability regarding aggregate permeability

A Study on the Mechanical and Wear-Resistance Properties of Hybrid Fiber Mortar Composites with Low Water-Cement Ratios

Analyzing the Filling Performance Parameters of Self-Compacted Mortar in Rock Filled Concrete

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete

Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study

Effects of pore structure and water absorption on internal curing efficiency of porous aggregates

Micro-nano scale pore structure and fractal dimension of ultra-high performance cementitious composites modified with nanofillers

The Influence of a Novel Hydrophobic Agent on the Internal Defect and Multi-Scale Pore Structure of Concrete