Abstract:The internal force state of continuous prestressed concrete rigid-frame (CPCR) bridges is significantly influenced by the construction process. To determine the initial internal force state, this study proposed an equivalent load calculation method that is specifically tailored for large-span high-pier CPCR bridges. This method involves calculating equivalent loads that account for the effect of the construction process. Nonlinear dynamic analysis model of a CPCR bridge was established in OpenSees, where the equivalent loads were applied to consider the initial internal force state and the Hertz-damp model was incorporated to simulate the pounding effect. Three groups of near-fault ground motions were selected as three-dimensional inputs for nonlinear time history analysis. Moreover, the paper investigated the seismic damage and the evolution of cracks in the main girder. The results show that the proposed internal equivalent load calculation method can effectively obtain the initial internal force state, which is in good agreement with the actual internal force state. The main girder of the main bridge will pound with the approach bridge and the top of the transition pier in strong earthquakes. The displacement and damage of the transition pier will be greatly underestimated if the pounding effect between the end of the main bridge and the top of the transition pier is neglected. In addition, the cracking damage of the top and bottom plates of the main girders and the distribution of the crack-prone areas were analyzed, and the cracked areas of the top plates of the main girders increased significantly with the increase of the peak ground acceleration.

Nonlinear Creep Analysis of Long-span Prestressed Concrete Bridges

Investigation of elasto-plastic seismic response analysis method for complex steel bridges

Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep

Experimental Study on Creep and Mechanical Behavior of Modern Bamboo Bridge Structure

Experimental study on creep and loading property of laminated bamboo bridge

Numerical model for time-dependent cracking and deflection of large-span concrete bridge structures

Influence of effect of creeping of the long span prestressed concrete cable-stayed bridge on internal forces in structural health monitoring

Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge

Long-Term Deflection of Prestressed Concrete Bridge Considering Nonuniform Shrinkage and Crack Propagation by Equivalent Load Approach

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Simulating analysis of cantilever casting of prestressed concrete bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

SIMULATION FOR CONSTRUCTION PROCESS OF P.C. CONTINUOUS RIGID FRAME BRIDGE

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Long Term Deformation Analysis of Shrinkage and Creep of Steel-Concrete Composite beams

Time-dependent creep and shrinkage analysis of curved steel–concrete composite box beams

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Nonlinear seismic response and damage analysis for continuous prestressed concrete rigid-frame bridge considering internal force state under near-fault ground motions

Long-term Behavior of Composite Beams with Shrinkage, Creep and Cracking(ⅱ):Theoretical Analysis