Abstract:Phase change materials (PCMs) with high latent heat are becoming a promising method for application in battery modules, but they are still limited by some drawbacks, such as low thermal conductivity and easy leakage. This article uses a high-temperature melt blending method to prepare a high thermal conductivity composite phase change material (CPCM) based on a three-dimensional metal organic network, and uses it in a battery thermal management system (BTMS). Paraffin wax (PA) with high latent heat value is used as PCM, hydrogel like (HGL) and styrene-butadiene-styrene block copolymer (SBS) are used as support materials, and expanded graphite (EG) is used as heat conduction additive. Experimental studies have shown that the prepared HGL can not only serve as a support material for CPCM to prevent PCM leakage, but also as a thermal conductivity additive to improve the thermal conductivity of CPCM due to the presence of metal ions. In addition, this article also prepared a series of CPCMs by adjusting the ratio of HGL to SBS. It was found that when the ratio of HGL to SBS was 1:1, the prepared PSHE2 had a thermal conductivity of 1.64 W/m∙K, which was 4.97 times that of pure PA. The corresponding phase transition enthalpy value could also be maintained as high as 185.4 J/g, and a mass retention rate of over 98.68% could be maintained under heating conditions of 70 ℃ for 1 hour. In addition, the highest temperature and maximum temperature difference of the battery module using PSHE2 are significantly lower than the other two battery modules. The highest temperature and maximum temperature difference can be controlled below 45.6 ℃ and 3.5 ℃, respectively, indicating that the BTMS using PSHE2 has better temperature control performance and temperature consistency, which can ensure the long-term cycling stability of the battery. Therefore, this work can provide a promising multifunctional composite PCM method for battery thermal management and other energy storage fields.

Flexible and Highly Thermally Conductive Phase Change Materials with Hierarchical Dual Network for Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Highly Thermal Conductive and Antileakage Composite Phase Change Materials Based on 3d Metal-Organic Networks for Battery Thermal Management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Thermally-induced flexible composite phase change material with enhanced thermal conductivity

Dual‐Encapsulated Highly Conductive and Liquid‐Free Phase Change Composites Enabled by Polyurethane/Graphite Nanoplatelets Hybrid Networks for Efficient Energy Storage and Thermal Management

A Novel Room-Temperature Flexible Phase Change Material for Solar Energy Photothermal Conversion and Battery Thermal Management

Dual-strategy-encapsulated phase change materials with thermal immune functions for efficient energy storage and all-climate battery thermal management

A novel stable and flexible composite phase change materials for battery thermal management

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Thermal Sensitive Flexible Phase Change Materials with High Thermal Conductivity for Thermal Energy Storage

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

High Thermal Conductivity Composite Phase Change Material with Zn2+ Metal Organic Gel and Expanded Graphite for Battery Thermal Management

Paraffin@SiO2 Microcapsules-Based Phase Change Composites with Enhanced Thermal Conductivity for Passive Battery Cooling

A Novel Flexible Composite Phase Change Material with Enhanced Toughness and Shape Stability for Battery Thermal Management

Battery Thermal Safety Management with Form-Stable and Flame-Retardant Phase Change Materials

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

High-Flexible Phase Change Composites with Enhanced Thermal Conductivity for Electronic Thermal Management

Carbon-based Phase Change Composites with Directional High Thermal Conductivity for Interface Thermal Management

Multifunction Composite Phase Change Material with Inorganic Flame Retardant and Organic Form Stability for Improving Battery Thermal Safety

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials