Abstract:This paper presents a coupled numerical investigation to assess the reaction to fire performance and fire resistance of various types of epoxy resin (ER) based composites. It examines the fire response of carbon fibre (CF) reinforced ER (CF/ER), ER with graphene nanoplatelets (GNP/ER) and CF reinforced GNP/ER (CF/GNP/ER). Thermal, physical and pyrolysis properties are presented to assist numerical modelling that is used to assess the material ability to pass the regulatory vertical burn test for new aircraft structures and estimate in-fire and post-fire residual strength properties. Except for the CF/GNP/ER composite, all other material systems fail the vertical burn test due to continuous burning after removal of the fire source. Carbon fibres are non-combustible and therefore reduce heat release rate of the ER composite. By combining this property with the beneficial barrier effects of graphene platelets, the CF/GNP/ER composite with 1.5 wt% GNP and 50 wt% CF self-extinguishes within 15 s after removal of the burner with a relatively small burn length. Graphene drastically slows down heat conduction and migration of decomposed volatiles to the surface by creating improved char structures. Thus, graphene is allowing the CF/GNP/ER composite panel to pass the regulatory vertical burn test. Due to low heat conduction and reduced heat release rate, the maximum temperatures in the CF/GNP/ER composite are low so the composite material retains very high in-fire and post-fire mechanical properties, maintaining structural integrity. In contrast, temperatures in the CF/ER composite are much higher. At a maximum temperature of 86 °C, the residual in-fire tensile and compressive mechanical strengths of CF/GNP/ER are about 87% and 59% respectively of the ambient temperature values, compared to 70% and 21% respectively for the CF/ER composite that has a temperature of 140 °C at the same time (but the CF/ER temperature will be higher due to continuing burning). Converting mass losses of the composites into char depth, the post-fire mechanical properties of the CF/GNP/ER composite are about 75% of the ambient condition compared to about 68% for the CF/ER composite.

Fire Behavior and Post-Fire Residual Tensile Strength Prediction of Carbon Fiber/phthalonitrile Composite Laminates

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Optimizing the Thermal Properties of Fiber Reinforced Phthalonitrile Composites

Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis

Thermal-fluid-structure Coupling Progressive Failure Analysis for the Type III Composite Cylinder under Localized Fire

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Determination of the tensile residual properties of a wound carbon/epoxy composite first exposed to fire

Characterization of Flammability and Fire Resistance of Carbon Fibre Reinforced Thermoset and Thermoplastic Composite Materials

About the influence of high temperature or fire testing conditions on the tensile behavior of carbon reinforced poly phenylene sulfide laminates

About the influence of a thermal aggression on the tensile behaviour of hybrid PEEK thermoplastic laminates

The unique wick effect and combustion behavior of flax fiber reinforced composites: Experiment and simulation

Designing Phthalonitrile/hydroxyl Compound Systems for High Performance CFRP Composites

Experimental Investigation and Numerical Modelling of the Fire Performance for Epoxy Resin Carbon Fibre Composites of Variable Thicknesses

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

The carbon fiber/epoxy composites toughened by fire-resistant glass fiber veils: Flammability and mechanical performance

Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure

Fire Retardancy of Carbon Nanofiber Sheet in Composite Laminates

Mass Loss and Effective Thermal Conductivity of Fire Retardant Nanocomposites

Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene

Investigating the synergistic effects of carbon and glass fibers on the mechanical and thermal properties of phenol‐containing phthalonitrile composites

Research on high-temperature mechanical behaviour of carbon/phenolic composites under ultra-high heating rates