Abstract:We investigate the architecture of microfabricated vapor cells with reflective sidewalls for applications in chip scale atomic sensors. The optical configuration in operation is suitable for both one-beam and two-beam (pump & probe) schemes. In the miniaturized vapor cells, the laser beam is reflected twice by the aluminum reflectors on the wet etched 54.7° sidewalls to prolong the optical length significantly, thus resulting in a return reflectance that is three times that of bare silicon sidewalls. To avoid limitations faced in the fabrication process, a simpler, more universal and less constrained fabrication process of microfabricated vapor cells for chip scale atomic sensors with uncompromised performance is implemented, which also decreases the fabrication costs and procedures. Characterization measurements show that with effective sidewall reflectors, mm3 level volume and feasible hermeticity, the elongated miniature vapor cells demonstrate a linear absorption contrast improvement by 10 times over the conventional micro-electro-mechanical system (MEMS) vapor cells at ~50 °C in the rubidium D1 absorption spectroscopy experiments. At the operating temperature of ~90 °C for chip scale atomic sensors, a 50% linear absorption contrast enhancement is obtained with the reflective cell architecture. This leads to a potential improvement in the clock stability and magnetometer sensitivity. Besides, the coherent population trapping spectroscopy is applied to characterize the microfabricated vacuum cells with 46.3 kHz linewidth in the through cell configuration, demonstrating the effectiveness in chip scale atomic sensors.

Molded Foaming 3D MEMS Vapor Cell for Weak Magnetic Detection

Compact M z atomic magnetometer with a thick silicon core MEMS vapor cell

Characterization of 87Rb MEMS vapor cells for miniature atomic magnetometers

Atomic Magnetometer with Microfabricated Vapor Cells Based on Coherent Population Trapping

Wafer-Level Filling of MEMS Vapor Cells Based on Chemical Reaction and Evaporation

Advance of the Micro-Magnetometer Memsmag Research

Characterization of <SUP>87</SUP>Rb MEMS vapor cells for miniature atomic magnetometers

Ultrasensitive SERF atomic magnetometer with a miniaturized hybrid vapor cell

Development of a Cesium Vapor MEMS Cell for Differential Measurement of Microwave Electromagnetically Induced Transparency

Magnetic-Ionic-Liquid-Functionalized Photonic Crystal Fiber for Magnetic Field Detection

Highly Sensitive Mach-Zehnder Interferometric Micromagnetic Field Sensor Based on 3D Printing Technology

Microfabricated Vapor Cells with Reflective Sidewalls for Chip Scale Atomic Sensors

Femtotesla 4he Magnetometer with a Multipass Cell

Magnetic-Based Polydimethylsiloxane Cap for Simultaneous Measurement of Magnetic Field and Temperature

Design and Analyses of a MEMS Based Resonant Magnetometer

A Flexible Magneto-electric Sensor with Enhanced Performance through Flower-Shaped BTO Fillers in P(VDF-TrFE) Matrix

Highly Sensitive Vector Magnetic Field Sensors Based on Fiber Mach–Zehnder Interferometers

A sensitive and stable atomic vector magnetometer for weak field detections using double orthogonal multipass cavities

Ultra-compact and high-precision differential detection method based on liquid crystal polarization grating for miniature atomic magnetometer

100pTcm Sensitive MEMS Resonant Magnetometer from a Commercial Accelerometer

A single beam Cs-Ne SERF magnetometer with differential laser power noise suppression method