Abstract:All-solid-state lithium–sulfur batteries are considered one of the most promising candidates for energy storage devices due to their high energy density and safety. However, the poor electron transport of sulfur-based cathodes significantly reduces their reaction kinetics, resulting in low utilization efficiency and subpar rate performance. Herein, leveraging the similar chemical properties of sulfur and selenium, we uniformly deposit SexS1−x (x = 0–0.3) solid solutions with different selenium content on the surface of active carbon via a facile melt-diffusion method to achieve SexS1−x@AC (x = 0–0.3) composite materials. The introduction of selenium effectively enhances the lithium-ion diffusion coefficient of the SexS1−x@AC (x = 0–0.3) cathodes, and improves the stability of the cathode/solid electrolyte interface. With the increase in selenium content, the reaction kinetics of the SexS1−x@AC (x = 0–0.3) cathodes are altered. Specifically, the average lithium-ion diffusion coefficients for the S@AC and Se0.2S0.8@AC cathodes are 6.11 × 10−14 and 1.65 × 10−13 cm2 s−1, respectively, showing a twofold increase. Concurrently, the Se0.2S0.8@AC cathode exhibits higher discharge capacity (698.8 mA h g−1) than that of the S@AC cathode (501.3 mA h g−1) at 1 A g−1. Surprisingly, even when the mass loading increases to 8.85 mg cm−2, the Se0.2S0.8@AC cathode still shows superior cycling stability, which is attributed to the fast ionic/electronic transport pathways within the cathode. Moreover, the Se0.2S0.8@AC cathode maintains good physical contact at the cathode/SE interface after cycling. In all-solid-state lithium–sulfur batteries, the introduction of selenium in the sulfur cathode enhances reaction kinetics (1.65 × 10−13 cm2 s−1), provides additional reactive sites, and significantly improves the electrochemical performance of Se0.2S0.8@AC even with high mass loading (8.85 mg cm−2).

High-Reaction Kinetics SexS1–x Cathodes for All-Solid-State Lithium–Sulfur Batteries

Selenium-Doped Sulfurized Polyacrylonitrile Hybrid Cathodes with Ultrahigh Sulfur Content for High-Performance Solid-State Lithium Sulfur Batteries

Rationally Design a Sulfur Cathode with Solid‐Phase Conversion Mechanism for High Cycle‐Stable Li–S Batteries

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

Selenium-Doped Sulfurized Poly(acrylonitrile) Composites as Ultrastable and High-Volumetric-Capacity Cathodes for Lithium–Sulfur Batteries

Solid‐State Lithium/Selenium–Sulfur Chemistry Enabled Via a Robust Solid‐Electrolyte Interphase

High-Performance Li-SeS x All-Solid-State Lithium Batteries.

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Se As Eutectic Accelerator in Sulfurized Polyacrylonitrile for High Performance All-Solid-state Lithium-Sulfur Battery

High‐Capacity, Long‐Life All‐Solid‐State Lithium–Selenium Batteries Enabled by Lithium Iodide Active Additive

High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

High‐Performance Li–SeS <i> <sub>x</sub> </i> All‐Solid‐State Lithium Batteries

High-Rate Performance All-Solid-State Li-SeS2 Battery with Selenium Sulphide/three-Dimensional Graphene As Cathode Material

Transition-Metal Sulfides for High-Performance Lithium Sulfide Cathodes in All-Solid-State Lithium-Sulfur Batteries

Synergistic sulfur-selenium cathodes for lithium-sulfur batteries

Conductive Li2S-NbSe2 Cathode Material Capable of Bidirectional Self-Activation for High-Performance All-Solid-State Lithium Metal Batteries

Homogeneous Sulfur–Cobalt Sulfide Nanocomposites As Lithium–Sulfur Battery Cathodes with Enhanced Reaction Kinetics

Constructing High‐performance Quasi‐solid‐state Sulfur Cathode via the Cooperation of Solid Electrolyte Interface and Selenium‐doping

Anion‐Doped Cobalt Selenide with Porous Architecture for High‐Rate and Flexible Lithium–Sulfur Batteries

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

All-solid-state lithium-sulfur batteries assembled by composite polymer electrolyte and amorphous sulfur/rGO composite cathode