Abstract:When an aircraft flies through an icy cloud at a low altitude and with a low speed, the surface of its windward parts will freeze due to the impact of the supercooled water droplets in the cloud. When the surface of key aerodynamic parts, including the leading-edge wings and propeller blades, and other parts are frozen, it will seriously affect the aerodynamic shape and result in drag increase and lift reduction. It will also seriously affect the controllability and stability of the aircraft and cause serious safety accidents. Therefore, the icing phenomenon of airplanes in flight and the corresponding mechanism have always been the focus of attention by researchers in the aviation field. The plasma flows control team of Northwestern Polytechnical University has proposed and developed anti-icing and de-icing methods based on AC-SDBD plasma actuation in recent years. At present, the feasibility and effectiveness of anti-icing using AC-SDBD plasma actuation have been verified. However, due to the strong multi-physics coupling characteristics and multi-time�scale processes shown in the plasma anti-icing process, the mechanism of actuation is not yet clear. In-depth exploration is urgently required to provide a basis for the further development of plasma�excited anti-icing methods. In the present research, a numerical simulation approach is used to study the rules of the ice freezing process of the airfoil, and to explore the influence of AC-SDBD plasma actuation in the growth process of ice accretion, and to compare the energy consumption to the electric heating device. The results show that during the wing freezing process, the normal ice layer growth rate at different positions is positively correlated with the local water droplet collection coefficient β value at the wall position. In the study of the impact of droplet impact characteristics, found that the pneumatic effect of AC-SDBD plasma excitation produced can change the flow field near the wing reference point, Change the trajectory and impact characteristics of the supercooled water droplets distributed in the gas, thereby reducing the droplet collection mass on the airfoil surface. When the airfoil surface is covered with a layer of the water film. At this time, the electro-hydraulic effect generated by the AC-SDBD plasma excitation can continue to work on the water film, significantly increasing the temperature of the water film collected on the wall. Compared with the electrical heating device discovery, the AC-SDBD plasma actuator may be at least equally effective to achieve the electrical anti-icing heating device, plasma excitation has a higher energy content utilization efficiency and faster response speed in anti-icing.

Development of De-Icing Method with Combined Excitation of Ultrasonic Guided Waves and Different Types of Low-Frequency Vibrations

Hybrid De-Icing Method Combining Electrothermal System and Ultrasonic Guided Waves

A Non-thermal De-icing Technique Using Ultrasonic Guided Waves

Deicing behavior and residue characteristic on cold surface excited by ultrasonic vibration

Stress Model Analysis and Effectiveness of an Ultrasonic Guided Wave De-icing Technique

Asymmetric Temperature Load Method for Simulation Study of Wing Leading Edge in Flight Deicing with MFC

Simulation and Experimental Study on the Ultrasonic Micro-Vibration De-Icing Method for Wind Turbine Blades

Simulation analysis on efficiency of wing electro-impulse de-icing system

Exploration on the Process and Mechanism of Plasma Actuation for Anti-Icing

Recent progress on ultrasonic de-icing technique used for wind power generation, high-voltage transmission line and aircraft

An Effect Assessment and Prediction Method of Ultrasonic De-Icing for Composite Wind Turbine Blades

Ultrasonic De-Icing of Wind Turbine Blades: Performance Comparison of Perspective Transducers

Damage accumulation model of ice detach behavior in ultrasonic de-icing technology

Mechanisms of de-icing by surface Rayleigh and plate Lamb acoustic waves

An accurate deicing method by utilizing the piezoelectric materials based on the active mode control theory

Low-energy avionic piezoelectric deicing system

Study on De-Icing Criterion of Electro-Impulse De-Icing Simulation

Surface Acoustic Waves Equip Materials with Active Deicing Functionality: Unraveled Deicing Mechanisms and Application to Centimeter Scale Transparent Surfaces

A holistic solution to icing by acoustic waves: de-icing, active anti-icing, sensing with piezoelectric crystals, and synergy with thin film passive anti-icing solutions

A light lithium niobate transducer design and ultrasonic de-icing research for aircraft wing

Ultra-efficient and Thermally-Controlled Atmospheric Structure Deicing Strategy Based on the Peltier Effect