Abstract:Low frequency vibration–assisted forming (LFVF) with high excitation force and dynamic response is beneficial because of the low load and high forming quality. To reveal the mechanism of LFVF, low frequency vibration–assisted tension (LFVT) with different amplitudes was performed on W-tempered (WT) and peak-aged (T6) 7075 alloy sheets, and the influences of low frequency vibration on the mechanical behaviors and microstructure evolution were investigated. The application of low frequency vibration created a remarkable vibration-softening effect, and a transition from vibration hardening to vibration softening was observed in the LFVT of 7075-T6. Besides, the stress-overshooting phenomenon occurred after vibration excitation in the LFVT of 7075-T6. The vibration-softening effect and stress-overshooting phenomenon were enhanced when the vibration amplitude was increased from 0.078 to 0.243 mm. The ductility of 7075-WT and 7075-T6 sheets could be improved with a vibration amplitude of 0.165 mm. The fracture elongation of 7075-WT and 7075-T6 increased from 17.93% and 13.62% to 20.14% and 14.45%, respectively. An increase in the vibration amplitude resulted in a slight increase in the hardness of the 7075-T6 samples, whereas naturally aged 7075-WT samples exhibited the opposite effect. In addition, the low-angle grain boundaries (LAGBs) and dislocation density generally increased with the superimposition of vibration for 7075-WT and 7075-T6, because the vibration stress provided additional energy for the initiation and migration of dislocations. For the LFVT of 7075-T6, the dislocation tangles enhanced by the interaction between precipitates and dislocations resulted in increased hardness and stress overshooting. The LFVT of 7075-WT with a large vibration amplitude resulted in the peak values for the LAGBs and dislocation density because of dislocation annihilation and absorption to the grain boundaries. These results provide a fundamental understanding of LFVF in high-strength aluminum alloys.

Mechanical Behavior and Flow Curve Modeling of AZ31B Magnesium Alloy under Low Frequency Vibration Assisted Tension

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Acoustic softening and hardening of aluminum in high-frequency vibration-assisted micro/meso forming

Constitutive modeling and deformation analysis of W-temper and peak aged 7075 alloy sheets under low frequency vibration assisted tension

AZ31 magnesium alloy electro-plastic flow stress model

A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation

Effects of process parameters on the mechanical properties and microstructure in ultrasonic vibration-assisted warm tensile deformation of AZ31 magnesium alloy

Mechanical Behavior and Microstructure of Low-Carbon Steel Undergoing Low-Frequency Vibration-Assisted Tensile Deformation

A Kinematic Hardening Constitutive Model for the Uniaxial Cyclic Stress–strain Response of Magnesium Sheet Alloys at Room Temperature

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension

Mechanical behaviors and microstructure characteristics of W-tempered and peak-aged 7075 alloy sheets under low frequency vibration–assisted tension

Flow stress and work hardening behaviour of Mg-3Al-1Zn alloy

Study on the deformation behavior of AZ31B-O magnesium alloy with the VPSC model

The Effect Of Superimposed Low-Frequency Vibration On Tensile Deformation Of Low-Carbon Steel

Deformation Behavior and Microstructure Evolution of Al-Zn-Mg-Cu Alloy under Low-Frequency Vibration-Assisted Compression: Considering the Relative Amplitude

Varying strain rates and elevated temperatures effects on the mechanical properties of AZ31B magnesium alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Deformation Behavior of AZ31B Magnesium Alloys with Different Process States under Thermal Compression

Enhancement of Tensile Ductility and Stretch Formability of AZ31 Magnesium Alloy Sheet Processed by Cross-Wavy Bending