Abstract:The current challenges faced by microwave planar sensors include their low sensitivity, limited detection range, and difficulties in operating small devices. This study proposes a metamaterial microwave sensor based on CSRR for determining the dielectric constants of liquid and solid materials. The novelty of the proposed sensor lies in the use of curved slots in the CSRR structure to achieve higher electric field concentration and to store a large amount of energy, the determination of the measurement area based on its electric field distribution, and the design of microfluidic channels to further improve the sensitivity to the resonance frequency change. The sensor operates at 2.45 GHz and has dimensions of 40 x 30 x 0.6 mm3. Since the dielectric constant of the contacting object affects the microwave sensor’s resonant frequency, the displacement of the sensor’s resonant frequency is measured using various items. The resonant frequency of the sensor adjusts when materials with varying dielectric constants are introduced into the measurement region. By measuring the frequency point of the measured material at the maximum return loss of the resonator, empirical equations with different coefficients are established to derive the dielectric constants of solids and liquids. The sensitivity and resolution were 4.12% and 102 MHz in solid and 0.78% and 8.4 MHz in liquid. The sensors were tested using five substrate materials commonly used in microwave circuits and different concentrations of ethanol solutions as samples. These findings validate the potential application of the sensor as a cost-effective alternative to expensive commercial sensors for dielectric characterization. The results demonstrate that the sensor possesses high sensitivity, high measurement accuracy, low cost, and easy of fabrication, making it an excellent alternative to expensive commercial sensors for dielectric characterization. This confirms the promising application of the sensor in the field of dielectric constant measurement.

Design of Dielectric Constant Sensor for Transformer Oil Condition Detection Based on All-Metal Metamaterial

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Differential Microwave Microfluidic Sensor Based on Microstrip Complementary Split-Ring Resonator (MCSRR) Structure

A Metamaterial-Inspired Microwave Sensor for Dielectric Characterization of Organic Liquids and Solid Dielectric Substrates

Tri Circle Split Ring Resonator Shaped Metamaterial With Mathematical Modeling for Oil Concentration Sensing

Design of Intelligent Sensing System for Insulation State of Power Transformer Based on Moisture Content

CSRR Metamaterial Microwave Sensor for Measuring Dielectric Constants of Solids and Liquids

Detection of Nonmetallic Contaminants in Lubricating Oil Using a Microwave Rectangular Cavity Resonator Sensor

Research on Transformer Oil Condition Diagnosis Technology Based on Multi-Frequency Ultrasonic Detection

Design of A Transformer Oil Viscosity, Density, and Dielectric Constant Simultaneous Measurement System Based on A Quartz Tuning Fork

Design and Optimization of Microwave Sensor for the Non-Contact Measurement of Pure Dielectric Materials

A High Sensitivity Microwave Sensor Based on Metamaterial Absorbers

Highly sensitive refractive-index sensor based on strong magnetic resonance in metamaterials

High‐precision Dielectric Sensor System Based on Balanced CSRR‐SIW Resonators

Development of an Online Detection Setup for Dissolved Gas in Transformer Insulating Oil

An Impedance Sensor for Distinguishing Multi-Contaminants in Hydraulic Oil of Offshore Machinery

Toroidal Metasurface for High Efficiency Sensing

Submersible High Sensitivity Microwave Sensor for Edible Oil Detection and Quality Analysis

A Highly Sensitive and Durable Sensor for In Situ Hydrogen Measurement in Transformer Oil

An Interdigital Microwave Sensor Based on Differential Structure for Dielectric Constant Characteristics Measurement.

Extremely Sensitive Microwave Sensor for Evaluation of Dielectric Characteristics of Low-Permittivity Materials