Abstract:Journal of Composite Materials, Ahead of Print. Using pre-stressed carbon fibre reinforced polymer/plastic (CFRP) to strengthen bridge structures is currently considered a promising technology and the durability of the structure is closely related to the material property. CFRP have good corrosion resistance, but they also experience different degrees of swelling, corrosion and hydrolysis in water immersion environments. Stress accelerates this effect and leads to deterioration of the mechanical properties of the materials. This work aims to investigate the durability of CFRP grids under water, wet-dry cycles of seawater, seawater immersion and 0% fu (fu is the ultimate tensile strength of the tested CFRP grids and it is constant stress in this paper), 30%fu, 60% fu coupled environments.Test aging time at room temperature (25°C) of 30, 60, 120, 180, 270, 360 days. The results indicate that the surface of epoxy resin is smooth at the initial moment by comparing of scanning electron microscope (SEM) image. With the increase of deterioration degree with aging time, the cavities and cracks appeared in the matrix. The epoxy resin content between the fibers decreased, and the adhesion force decreased. When the aging time is short, the tensile damage section of CFRP grid is flaky and the matrix is tightly bonded with the fiber. The later damage is mainly blow-up damage, which the fracture section is typical filiform. After CFRP grids aged for 360 days, the tensile strength decreased by 6.2%, 10.2%, 10.9% in the water, seawater solution and seawater wet-dry cycle environments. The tensile strength decreased by 10.2%, 12.3% and 20.2% under the coupling of seawater and different stress levels. A semi-empirical model of durability is proposed to provide a good reference value for the durability prediction of FRP materials.

Degradation of an Underwater Epoxy Adhesive and Its Bonding to Steel Subjected to Water or Seawater Immersion

Durability of Structural Adhesive Exposed to Marine Environment

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

A Systematic Study on the Failure Behaviors of Aluminum Alloy/composite Bonded Joints Exposed to Various Typical Aging Environments for Automobiles

Durability Performances of Carbon Fiber-Reinforced Polymer and Concrete-Bonded Systems under Moisture Conditions

Interfacial Study of Steel Joints Prepared with a Catechol-Modified Epoxy Adhesive with Enhanced Bonding Performance and Durability

Influence of Water on Shear Bond Properties of FRP-concrete Interfaces

Fracture durability of composite–titanium adhesively bonded structures exposed to seawater environment

Long-Term Performance of External Bonding under Moisture and Temperature Effects

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Experimental study on AFRP-to-concrete bond behavior subjected to underground water

Predicting Degradation of Composite-Titanium Adhesively Bonded Joints Exposed to Seawater Environment

Failure Study of BFRP Joints with Two Epoxy Adhesives under Hygrothermal Coupling

Effect of seawater and stress coupling on the durability of carbon fibre-reinforced polymer

Degradation mechanism for mechanical property of carbon fiber reinforced epoxy composite under simulated seawater absorption coupled with flexural load

On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests

Unraveling disadhesion mechanism of epoxy/CSH interface under aggressive conditions

A Study of the Effects of Moisture on Composite-to-Metal Double-Lap Shear Joints

Durability of anticorrosive-coated steel–carbon fiber reinforced polymer structural adhesive joint at high temperature and humidity

A Study on Hygrothermal Degradation and Recovery of an Epoxy Adhesive Using Molecular Dynamics Simulation

Effects of Moisture Ingress on the Mesoscale Mechanical Properties of Epoxy Adhesives under Elevated Temperature