Abstract:Lithium ion batteries (LIB) are representing a milestone in electrochemical energy storage and are still the state-of-the-art battery system for various mobile and stationary energy storage applications. However, the practical energy density of LIBs starts to reach an asymptotic limit. Beside LIBs, an auspicious variety of battery systems comprising a better option for specific applications in terms of e.g. energy density, so establishing a diversity of specific battery systems for specific applications is a good strategy. [1 ] After initially paving the way for the LIB, the lithium metal battery (LMB) experiences a revival due to an outstanding theoretical specific capacity (3 860 mAh g −1 ) and low electrochemical potential (−3.04 V vs. SHE). However, continuous electrolyte consumption, the formation of an inhomogeneous SEI and high surface area lithium (HSAL), whose growth is induced by the heterogeneous and fragile structure of the SEI film, are still dominant challenges that need to be overcome. The liquid electrolytes also deal with safety issues like risk of leakage and flammability. The combination of Li metal with solid polymer electrolytes (SPE) could supress HSAL formation and avoid those safety hazards. However, SPEs deal with poor ionic conductivity at room temperature (10 −8 S cm −1 ≤ σ ≤ 10 −5 S cm −1 ) and, additionally, it is necessary to control the Li morphology during electrodeposition/dissolution to realize high-energy all-solid-state batteries (ASSB) based on Li metal anodes. [2 ,3 ] Several artificial protective coatings have been proposed to improve the LMA/SPE interface by facilitating the Li ion flux, promoting a homogeneous Li electrodeposition/dissolution and protecting the LMA against electrolyte degradation as well as enhancing the Li wetting interface. The SPE induces a more flexible interphase that withstands the volume change. Recently, metal oxides coated by atomic layer deposition (ALD) have gained attention due to a great thickness control, the possibility of monolayer deposition as well as a consequential homogeneity of the deposited protection layer. Furthermore, ALD is suitable for roll-to-roll coatings which is feasible for industrial application. [3,4 ] Herein, the setup of Li-metal-polymer batteries (LMP® technology) commercialized by Blue Solutions and applied in their "blue cars" (30 kWh, 100 Wh kg -1 ) was modified in several points. Li metal was coated with a metal oxide via atomic layer deposition (ALD) to form an intermetallic phase as protective layer and to improve the Li + flux. The artificial protective coating at Li metal was combined with a PEO- and/or polyether-based SPE and the effect of the modifications on the electrochemical performance in different ASSB setups was investigated and characterized. [1] Placke, T.; Kloepsch, R.; Dühnen, S.; Winter, M. Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density. Journal of Solid State Electrochemistry 2017, 21, 1939-1964. [2] Cheng, X.-B.; Zhang, R.; Zhao, C.-Z.; Zhang, Q. Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. Chemical Reviews 2017, 117, 10403-10473. [3] Han, Z.; Zhang, C.; Lin, Q.; Zhang, Y.; Deng, Y.; Han, J.; Wu, D.; Kang, F.; Yang, Q. H.; Lv, W. A Protective Layer for Lithium Metal Anode: Why and How. Small Methods 2021, 5, 2001035. [4] Han, Y.; Liu, B.; Xiao, Z.; Zhang, W.; Wang, X.; Pan, G.; Xia, Y.; Xia, X.; Tu, J. Interface issues of lithium metal anode for high‐energy batteries: Challenges, strategies, and perspectives. InfoMat 2021, 3, 155-174.

Deeply Lithiated Carbonaceous Materials for Great Lithium Metal Protection in All-Solid-State Batteries

Advances in carbon materials for stable lithium metal batteries

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid

Molecular-Level Engineering of Protected Li Metal Anodes for High Performance Next-Generation Batteries

Solid-State Plastic Crystal Electrolytes: Effective Protection Interlayers For Sulfide-Based All-Solid-State Lithium Metal Batteries

Dual-Protective Artificial Layer on Lithium Metal Anodes for Improved Electrochemical Performance – an in-Depth Morphological and Electrochemical Characterization

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

Lithium/Graphene Composite Anode with 3D Structural LiF Protection Layer for High-Performance Lithium Metal Batteries

High‐Areal‐Capacity and Long‐Cycle‐Life All‐Solid‐State Lithium‐Metal Battery by Mixed‐Conduction Interface Layer

Stabilizing Interface Between Li10SnP2S12 and Li Metal by Molecular Layer Deposition

Towards Safer All-Solid-State Lithium Metal Batteries by an Artificial Protection Layers

Ion/Electron Conductive Layer with Double-Layer-Like Structure for Dendrite-Free Solid-State Lithium Metal Batteries

Carbon Enables the Practical Use of Lithium Metal in a Battery

A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes

Lithium anode interlayer design for all-solid-state lithium-metal batteries

Advances of Carbon-Based Materials for Lithium Metal Anodes

Restraining lithium dendrite formation in all-solid-state Li-metal batteries via the surface modification of the ceramic filler

Armoring lithium metal anode with soft–rigid gradient interphase toward high-capacity and long-life all-solid-state battery