Abstract:A near-field based on a semi-passive intelligent reflecting surface (IRS)-aided integrated sensing and communication (ISAC) framework is proposed. Our objective is to identify the optimal beam direction from the base station to both the communicating user and the sensing target through downlink beam scanning signals. Especially, in the communication module, the beam scanning process in the downlink by IRS’s passive reflecting elements (REs) searches for the optimal reflected beam and sends the signal from the base station to the communicating user. Meanwhile, in the sensing module, the IRS can estimate the location of nearby targets by analyzing the echo signals received by the active sensing elements (SEs) on the IRS. To achieve the above objectives, in this paper, we design the near-field codebook by considering the near-field cascaded array steering vectors of the IRS and match the optimal codewords of the IRS through an exhaustive training process, so as to efficiently complete the near-field beam training under the matched near-field channel model. We have done a performance analysis of this ISAC system for the Cramer-Rao bound (CRB), and CRB provides performance constraints for near-field target sensing. Specifically, the CRB curve shows a monotonic decrease with increasing beam scan duration, while the achievable rate initially increases and then decreases. Therefore, we need to set the size of the model codebook space reasonably to balance the perception and communication performance. Simulation results show that the perceptual performance of our proposed scheme in the ISAC system is close to the derived CRB.

Quantization Beam Analysis and Codebook Design for One-Bit Reconfigurable Intelligent Surface

Beamforming Design for Multiuser Transmission Through Reconfigurable Intelligent Surface.

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Secure Beamforming Design for Reconfigurable Intelligent Surface Assisted Downlink Transmission

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Beam Selection for RIS-Enabled Terahertz Multi-User MIMO Systems via Multi-Task Learning

Optimal Configuration of Reconfigurable Intelligent Surfaces With Non-uniform Phase Quantization

Beam Scanning Design and Performance Analysis for Near-Field IRS-Aided Integrated Sensing and Communication Systems

Robust Secure Beamforming Design for Multi-RIS-Aided MISO Systems with Hardware Impairments and Channel Uncertainties

Reward-Maximization-Based Passive Beamforming for Multi-RIS-Aided Multi-User MISO Systems.

Quantized Phase Alignment by Discrete Phase Shifts for Reconfigurable Intelligent Surface-Assisted Communication Systems

Codebook-Based Solutions for Reconfigurable Intelligent Surfaces and Their Open Challenges

Hybrid Beamforming for Reconfigurable Intelligent Surface based Multi-User Communications: Achievable Rates With Limited Discrete Phase Shifts

Inter-RIS Beam Focusing Codebook Design in Cooperative Distributed RIS Systems

Practical RIS-Aided Coded Systems: Joint Precoding and Passive Beamforming

$1$-Bit SubTHz RIS with Planar Tightly Coupled Dipoles: Beam Shaping and Prototypes

Practical Hybrid Beamforming With Finite-Resolution Phase Shifters for Reconfigurable Intelligent Surface Based Multi-User Communications

RIS Partitioning Based Scalable Beamforming Design for Large-Scale MIMO.

Two-Timescale-Based Beam Training for RIS-Aided Millimeter-Wave Multi-User MISO Systems

Beamforming Design for Reconfigurable Intelligent Surface via Bayesian Optimization

Low complexity beamforming design in reconfigurable intelligent surface-assisted communication systems