Abstract:CO2 sequestration technology is crucial for carbon capture and storage. Methane hydrate formation and dissociation, CO2 and water injection processes are experimentally simulated to evaluate the entire technological process. Generally, two common methods of CO2 storage are geological storage and ocean storage. CO2 storage in marine sediments is a persistent and safe method and most sites are conducive for CO2 hydrate formation. CO2 storage in form of hydrate are theoretically both stable and permanent. For the selection of CO2 storage sites, depleted natural gas hydrate deposit is favourable and beneficial. Firstly, the phase equilibrium pressure of CO2 hydrate is usually lower than that of methane hydrate,hence depleted natural gas hydrate deposits can meet the requirement of CO2 hydrate stability. Secondly, residual marine clathrate structures in depleted natural gas hydrate deposits can improve CO2 hydrate formation which enhances the storage efficiency. Thirdly, the scale of gas hydrate commercial-use reserves is large enough to satisfy CO2 storage capacity requirements. Fourthly, CO2 hydrate formation in depleted natural gas hydrate deposit after methane recovery is beneficial to preserve the mechanical behaviour of marine sediments. That increases the safety of hydrate exploitation and CO2 storage. Currently, most investigations about CO2 storage in marine sediment are CO2–methane exchange, which is quite different from this study. The CO2–methane exchange researches are aimed to enhance gas hydrate dissociation while store CO2. CO2–methane exchange is beneficial for methane recovery and CO2 storage. However, this method is still immature because of its slow replacement process. CO2 sequestration in depleted methane hydrate reservoirs can also achieve the goals but very few studies refer to this topic nowadays. Previous investigations have been done in our lab. The purpose of those studies is improving the stability, efficiency and safety of CO2 storage after methane recovery. In those studies, CO2 injection into the glass beads after methane recovery in the laboratory was conducted to simulate the CO2 storage characteristics in depleted marine methane hydrate deposits. Methane hydrate formation and dissociation, CO2 and water injection processes and liquid water saturation and distribution were monitored by magnetic resonance imaging. The effects of different parameters on CO2 hydrate formation are analysed to evaluate hydrate-based CO2 sequestration technologies. In methane hydrate formation initial water saturation in glass beads determines methane hydrate saturation. In methane hydrate dissociation process, depressurization amplitude is the dominated factor influencing methane hydrate dissociation rate. In CO2 injection process, pressure is the key factor influencing the CO2 hydrate formation. CO2 injection rate is negatively correlated with CO2 saturation and CO2 conversion rate. A higher CO2 flow rate results in lower CO2 hydrate saturation and CO2 conversion rate. However, the final CO2 hydrate formation is still determined by initial water saturation in glass beads, which is similar with methane hydrate formation. Water injection was intended to enhance CO2 hydrate formation but has no effects on CO2 water injection. The

Behaviors of Hydrate Cap Formation Via Co2-H2o Collaborative Injection：Applying to Secure Marine Carbon Storage

Enhancing Gas Production and CO2 Sequestration from Marine Hydrate Reservoirs Through Optimized CO2 Hydrate Cap

Effects of Hydrate Cap on Leakage Prevention and Capacity Improvement of Sub-Seabed CO2 Sequestration

Formation Characteristics and Leakage Termination Effects of CO2 Hydrate Cap in Case of Geological Sequestration Leakage

Optimizing CO2 Hydrate Storage: Dynamics and Stability of Hydrate Caps in Submarine Sediments

CO2 Hydrate Formation Characteristics Inside Seawater Residual/saturated Sediments under Marine CO2 Storage Scenes

A Comparative Study of Hydrate-Based CO2 Sequestration at Different Scales

Large-Scale Experimental Investigation of Hydrate-Based Carbon Dioxide Sequestration

Numerical Investigation of CO2 Storage Capacity Via Hydrate in Deep-Sea Sediments

of CO 2 sequestration in depleted methane hydrate reservoirs

Molecular Dynamics of Carbon Sequestration Via Forming CO2 Hydrate in a Marine Environment

Molecular Dynamics of Carbon Sequestration via Forming CO 2 Hydrate in a Marine Environment

Study on Carbon Storage by CO<sub>2</sub> Hydrate Formation in the Ion-Containing Environment

Dependence of the hydrate-based CO2 storage process on the hydrate reservoir environment in high-efficiency storage methods

CO2 Storage Behavior Via Forming Hydrate from N2/CO2 Gas Mixtures in the Presence of Initial SI CO2 Hydrate Seeds

Study on the Transport and Transformation Law of CO&lt;sub&gt;2&lt;/sub&gt; Marine Storage in Reservoirs with Various Permeability Anisotropy

How Shallow CO2 Hydrate Cap Affects Depressurization Production in Deeper Natural Gas Hydrate Reservoirs: an Example at Site W17, South China Sea

Hydrate management strategies for CO 2 injection into depleted gas reservoirs

CO2 Sequestration in Depleted Methane Hydrate Sandy Reservoirs

Optimizing CO2 Hydrate Sequestration in Subsea Sediments through Cold Seawater Pre-Injection

Optimized Strategies for Efficient CO2 Trapping Using Hydrate Technology by Pressure Adjustment