Peparation of Diacetals of 2,2-Bis (Hydroxymethyl)-1,3-propanediol

Guanwu Wang,Xian Yuan,Xuegong Lei,Youcheng Liu

DOI: https://doi.org/10.3724/j.issn.1000-0518.1994.1.114115

1994-01-01

Abstract:Diacetals of 2,2-bis(hydroxymethyl)- 11,3-propanediol were prepared by condensation of aldehydes with 2,2-bis(hydroxymethyl)-1,3-propanediol in benzene. Thev were characterized by 1H NMR,IR and elemental analysis.

What problem does this paper attempt to address?

Synthesis technology of 3-n-propyl-2, 4-dihydroxyacetophenone

Yuan Liu,Yun Nan,DAI Li-yan,WANG Xiao-zhong,CHEN Ying-qi

DOI: https://doi.org/10.3785/j.issn.1008-973X.2012.09.023

2012-01-01

Abstract:An improved process was reported to solve the problems such as low yield and high costs in the synthesis of 3-n-propyl-2, 4-dihydroxyacetophenone, which is a key intermediate of Leukotriene receptor antagonist. The target compound was synthesized starting from m-dihydroxybenzene, via acylation, allylation, Claisen rearrangement and hydrogenation reduction. The optimal reaction conditions were as follows. The acylation reaction which used acetic acid as acylation agent and ZnCl 2 as catalyst was carried out under reflux for 5 h, and 77.9% yield was obtained. The allylation reaction using allyl chloride as allylation reagent and NaBr, KI as catalyst was carried out at 40°C for 2 h and continued at 70°C for 14 h, to give 98.6% yield. In Claisen rearrangement carried out at 205°C for 4.5 h, diphenyl ether was used as reaction solvent and NaCl was used as catalyst, and the yield was improved to 67.4%. In the final step, the hydrogenated reduction with Pd/C (w(Pd) is 5%) as catalyst was carried out at 45°C for 6 h, and 88.6% yield was obtained. The process is much of industrial value because of high yield, cheap and available materials, and convenient operations. The structure of the main compounds was confirmed by 1H-NMR, GC-MS and IR.
Catalytic Dehydration of 2,3-Butanediol over P/Hzsm-5: Effect of Catalyst, Reaction Temperature and Reactant Configuration on Rearrangement Products

Jinbo Zhao,Dinghua Yu,Wengui Zhang,Yi Hu,Ting Jiang,Jie Fu,He Huang

DOI: https://doi.org/10.1039/c5ra23251a

IF: 4.036

2016-01-01

RSC Advances

Abstract:As a type of important bio-based vicinal diol, 2,3-butanediol could be transformed into methyl ethyl ketone and 2-methyl propanal through a pinacol rearrangement mechanism under acid catalysis conditions.
An Improved Synthesis of 2,2-Diethoxypropane by Using Triethyl Orthofomate

Guoqing Shen,Liyan Dai,Xiaozhong Wang,Yingqi Chen

DOI: https://doi.org/10.3969/j.issn.1001-7631.2005.04.016

2005-01-01

Abstract:2,2-Diethoxypropane was prepared by acetone and anhydrous alcohol under triethyl orthoformate as dehydration agent and ammonium chloride as catalyst. Effects of reaction condition on the condensation were investigated, according to the method of single factor test. The preferably condition was that acetone 26 g (0.45 mol), triethyl orthoformate 74 g (0.50 mol), alcohol 75 mL and ammonium chloride 0.72 g were reacted under reflux for 3 h. The yield was 77.5%.
Preparation of 2-Ethoxypropene by Liquid Phase Pyrolysis of 2,2-Diethoxypropane

Li-yan DAI,Ying-qi CHEN

DOI: https://doi.org/10.3969/j.issn.1001-8255.2001.05.017

2001-01-01

Abstract:2,2-Diethoxypropane was prepared from acetone and triethyl orthoformate with ammonia chloride as catalyst,then it was pyrolytically decomposed to produce 2-ethoxypropene in liquid medium of benzyl silicon oil.The process was simple with 64.8% overall yield.
Trimerization of Aldehydes with One Α -Hydrogen Catalyzed by Sodium Hydroxide

Yu-Gang Li,Chen-Xi Luo,Chao Qian,Xin-Zhi Chen

DOI: https://doi.org/10.2478/s11696-013-0450-5

2014-01-01

Abstract:Trimerization of 2-methylpropanal (isobutyraldehyde) is a simple and effective method to synthesize 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate and 2,2,4-trimethyl-1,3-pentanediol-3-monoisobutyrate which are often used as film forming auxiliaries in paints. The use of solid sodium hydroxide as a catalyst provides an excellent yield of above 85 % after the optimization of the reaction time and the catalyst dosage. Furthermore, trimerization of four other aldehydes with one α -hydrogen catalyzed by solid sodium hydroxide can also take place and the yield of 1,3-diol monoesters reaches 50–70 %. Trimerization of aldehydes with one α -hydrogen can be explained by a three-step reaction mechanism: (i) aldol condensation of aldehyde; (ii) crossed Cannizzaro reaction; and (iii) esterification of carboxylic acid and alcohol.
Acetalization of Carbonyl Compounds with 2,2,4-Trimethyl-1,3-pentanedio Catalyzed by Novel Carbon Based Solid Acid Catalyst

Ling Liu,Yuechang Zhao,Shan Gan,Xuezheng Liang,Jianguo Yang,Mingyuan He

DOI: https://doi.org/10.1016/s1003-9953(08)60042-0

2008-01-01

Abstract:The synthesis of 2, 4-diisopropyl-5,5-dimethyl-1,3-dioxane through the acetalization of isobutyraldehyde with 2, 2, 4-trimethyl-1,3-pentanediol (TMPD) catalyzed by the novel carbon based acid was first carried out. High conversion (≥98%) and specific selectivity were obtained using the novel carbon based acid, which kept high activity after it was reused 5 times. Moreover, the catalyst could be used to catalyze the acetalization and ketalization of different aldehydes and ketones with superior yield. The yield of several products was over 90%. The novel heterogeneous catalyst has the distinct advantages of high activity, strikingly simple workup procedure, non-pollution, and reusability, which will contribute to the success of the green process greatly.
Synthesis of 1,3-Propanediol by Cross Aldol Reaction and Hydrogenation of Formaldehyde with Acetaldehyde

Shifeng Jiang,Zheng Li,Lingling Zhao,Mengqing Sun,Xu Zhang,Dongyuan Yang,Guoqiang Xu

DOI: https://doi.org/10.1021/acssuschemeng.1c06393

2022-02-10

Abstract:3-Hydroxypropanal (3-HPA) is formed by the cross-aldol reaction of formaldehyde (HCHO) with acetaldehyde (CH3CHO), which further converts to 1,3-propanediol (1,3-PDO). Mg/SiO2 and X-5Mg/SiO2 (X = Mn, Fe, Co, Ni) catalysts were prepared using the sol–gel method and characterized with XRD, BET, TEM, and NH3- and CO2-TPD methods. The 5Mg/SiO2 showed higher activity in terms of the yield and selectivity due to its suitable basic and acidic density. The addition of Mn to the 5Mg/SiO2 catalyst caused dispelling of weak basic sites but maintained strong basic sites, and the high CH3CHO conversion was maintained. The increase of weak acidic sites contributed to the increase of 3-HPA selectivity for the 1Mn-5Mg/SiO2 catalyst. The cross-aldol reaction of HCHO with CH3CHO to produce 3-HPA more easily proceeded than the self-aldol reaction of CH3CHO according to the reaction kinetic analysis. Furthermore, Raney nickel was successfully applied to the hydrogenation process of 3-HPA to 1,3-PDO with over 90% HPA conversion and 1,3-PDO selectivity.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Microwave Enhanced Catalytic Hydration of Acrolein to 3-Hydroxypropionaldehyde Using Simultaneous Cooling: Experimental and Theoretical Studies

Qinglong Xie,Yuqiang Zhou,Yilei Wang,Tongbo Pan,Ying Duan,Shangzhi Yu,Weirong Ji,Yong Nie

DOI: https://doi.org/10.1016/j.ces.2023.118493

IF: 4.7

2023-01-01

Chemical Engineering Science

Abstract:Catalytic hydration of acrolein to 3-hydroxypropionaldehyde (3-HPA) is a key step for the chemical pro-duction of 1,3-propanediol (1,3-PDO) from renewable glycerol. However, a main issue of low reaction rate and long reaction time exists in the conventional hydration process. Here, we developed a microwave-assisted system for the efficient conversion of acrolein to 3-HPA. Simultaneous cooling method was adopted to maintain continuous microwave irradiation and meanwhile stable temperature during the reaction. The effects of catalyst type, temperature, catalyst loading and microwave power on acrolein conversion and 3-HPA selectivity were examined. Kinetic study showed that microwave irradi-ation could help for the reduction in activation energy, which led to acceleration in reaction rate during the acrolein hydration process. In addition, the density functional theory (DFT) calculations on the adsorption and reaction behavior of reactants molecules on the catalyst are consistent with the experi-mental results, which confirm the intensification effect of the microwave field.(c) 2023 Elsevier Ltd. All rights reserved.
Synthesis of 1,3-Diphenylacetones

Yan-yan ZHAO,Hui-jing LI,Qin-xi WU,Kai DENG,Yan-chao WU

DOI: https://doi.org/10.15952/j.cnki.cjsc.1005-1511.2018.04.17162

2018-01-01

Abstract:A series of 1,3-diaryl-1-oxo-propylene compounds(1a~1j)were obtained from substituted acetophenone and substituted aromatic aldehydes.Ten 1,3-diaryl-1-acetones(3a~3j)were synthe-sized by the reaction of 1a ~1j with 4-methylbenzenesulfonhydrazide(2).The structures were con-firmed by 1H NMR, 13C NMR,IR and HR-MS(ESI).The effects of base,solvent,temperature and the ratio{γ[n(1a)/n(2)n/(base)]} on the yield of 3a were studied.The results showed that 3a could be obtained with the highest yield(80%)under the optimum conditions(γ=1/2/2, potassium phosphate as base,ethanol as solvent,reaction at 80 ℃for 4 h).
Acetalization of Aldehydes (ketones) with Diols Catalyzed by Brnsted Acidic Ionic Liquids

Zhi‐Kang Xu

2005-01-01

Abstract:The acetalization of aldehydes or ketones with diols to the corresponding 1,3-d iox olane derivatives was performed at room temperature in the absence of any organi c solvent and dehydration agent by using different acidic ionic liquids as cata lysts, including HMImBF4, HeMImBF4, BMImH2PO4, BMImHSO4, H2SO4 and H3PO4. Amon g these acids, the Brnsted acidic ionic liquid BMImH2PO4 showed the best catalytic performance. The conversion depended on the properties of the substrates in this reaction. The easier the nucleophilic addition of diol s to aldehydes/ketones was, the higher conversion it gave. During the reaction p rocess the removal of water produced was unnecessary. After the reaction the de sired product 1,3-dioxolane derivatives could be isolated from the reaction sys tem automatically, and the after-treatment was convenient. The acidic ionic liq uid could be reused directly without dehydration for at least 10 times.
Synthesis of 2-Methyl-1,2-diaminopropane

LU Fei,YU Di-hu,LI Yong

DOI: https://doi.org/10.3969/j.issn.0367-6358.2011.12.008

2011-01-01

Chemistry World

Abstract:2-Methyl-1,2-diaminopropane is an important intermediate for the preparation of anti-malarial drug OZ277.It was prepared with acetone cyanohydrin as raw material by ammonolysis,acylation and hydrogenation and hydrolysis.The effects of temperature and different kinds of catalysts on the yield of acylation were investigated,and some optimizations were made to the removal of water from crude product.The total yield was 62.68%.The structure of title product was identified by IR,1H 、13C NMR spectroscopy and mass spectroscopy.
Preparation of 1,2-diacylbenzenes from o-hydroxyaryl ketone acylhydrazones using cross-linked poly[styrene-(iodoso diacetate)]

Huang Xian,Qing Zhu,Jizheng Zhang,X Huang,JZ Zhang

DOI: https://doi.org/10.1081/SCC-100105117

2001-01-01

Synthetic Communications

Abstract:The 2% cross-linked poly[styrene(iodoso diacetate)] was used to synthesis of 1,2-diacylbenzenes, which gave high yields, and could be recycled.
Synthesis of Z(E)-ethyl 3-Oxo-2-(4-phenyl-1, 3-Dithiolan-2-ylidene)butanoate and Its Condensation Reaction with Arylaldehydes

WANG Yan-ru,YU Hai-feng,LI Xiao-fang,LIU Qun

DOI: https://doi.org/10.3321/j.issn:0455-2059.2007.04.015

2007-01-01

Abstract:Z(E)-ethyl 3-oxo-2-(4-phenyl-1,3-dithiolan-2-ylidene)butanoate (1) was prepared in moderate (40.3%) yield by the reaction of ethyl 3-oxobutanoate with carbon disulfide and 1-(1,2-dibromoethyl)benzene with potassium carbonate as the base in DMF.Subsequently,the condensation reaction of 1 with arylalde- hydes was performed in the presence of C_2H_5ONa in C_2H_5OH,in which the product of condensation and ester hydrolysis:(2Z(E),4E)-3-oxo-5-phenyl-2-(4-phenyl-1,3-dithiolan-2-ylidene)pent-4-enoic acid (2) were isolated in good yield.
Synthesis of 2,4-Diisopropyl-5,5-dimethyl-1,3-dioxane Catalyzed by Brønsted Acidic Ionic Liquids

WenJuan Wang,YouFei Wang,WenPing Cheng,Jian Wang,JianGuo Yang,MingYuan He

DOI: https://doi.org/10.1007/s11434-008-0377-3

2008-01-01

Abstract:The acetalization reactions of isobutyraldehyde with 2,2,4-trimethyl-1,3-pentanediol (TMPD) for the synthesis of 2,4-diisopropyl-5,5-dimethyl-1,3-dioxane were carried out under mild reaction conditions using four water-stable Brønsted-acidic task-specific ionic liquids ([HMIM]BF4, —SO3H functionalized acidic ionic liquid, —COOH functionalized acidic ionic liquid, [NMP][HSO4]) as environmentally benign catalysts for the first time. The process is highly effective and very selective. The —COOH functionalized Brønsted acidic ionic liquid with the two acid sites (IL-3) exhibited the most excellent catalytic performance under mild reaction conditions. The —COOH functionalized Brønsted acidic ionic liquid could be conveniently separated from the product and easily recycled in subsequent runs.
Synthesis Of(2e, 6E )-Octadiene-3, 7- Dimethyl-1,8- Diol-1- Acetate

HUANG Jian-ping,DAI Le,ZHANG Hao,CHEN Fen-er

DOI: https://doi.org/10.3969/j.issn.1006-2858.2007.06.005

2007-01-01

Abstract:Objective To prepare(2E,6E)-octadiene-3,7-dimethyldiol-1acetate.Methods The target compound was synthesized by five steps(acetylating,addition-elimination,replacement,oxidation and rearrangement)with geraniol.Results The desired product was obtained in over all yield of 49.7% and its structure was confirmed by 1H-NMR and IR.Conclusions A new route for the synthesis of (2E,6E)-octadiene-3,7-dimethyldiol-1acetate was explored.
Chemoselective Thioacetalization with Odorless 2-(1,3-dithian-2-ylidene)-3-oxobutanoic Acid As a 1,3-Propanedithiol Equivalent

HF Yu,DW Dong,OY Yan,Q Liu

DOI: https://doi.org/10.1139/v05-184

2006-01-01

ChemInform

Abstract:Odorless 2-(1,3-dithian-2-ylidene)-3-oxobutanoic acid (1c) was prepared and investigated in the thioacetalization of carbonyl compounds as a 1,3-propanedithiol equivalent. The results showed that the thioacetalization of various carbonyl compounds 2 with 1c proceeded smoothly and afforded the corresponding dithioacetals 3 in high yields (up to 99%) in the presence of acetyl chloride at room or reflux temperatures. Moreover, the thioacetalization exhibited high chemoselectivity between aldehydes and ketones. Key words: chemoselectivity, 2-(1,3-dithian-2-ylidene)-3-oxobutanoic acid, α-oxo ketene dithioacetal, 1,3-propanedithiol equivalent, thioacetalization.
The First Nonthiolic, Odorless 1,3-Propanedithiol Equivalent and Its Application in Thioacetalization.

Q Liu,GB Che,HF Yu,YC Liu,JP Zhang,Q Zhang,DW Dong

DOI: https://doi.org/10.1021/jo034702t

2003-01-01

The Journal of Organic Chemistry

Abstract:2-[2-Chloro-1-(1-chlorovinyl)allylidene]-1,3-dithiane 1 was synthesized by the chlorination of 3-(1,3)-dithianylidenepentane-2,4-dione 2 using the Vilsmeier-Haack reagent in 99% yield. As a novel nonthiolic, odorless 1,3-propanedithiol equivalent, 1 was investigated in the thioacetalization reaction. Various types of aldehydes and ketones 3 were converted to the corresponding dithianes 4 in the presence of 1 in high yields (79-97%). Moreover, 1 exhibited obvious chemoselectivity between aldehyde and ketone in this thioacetalization reaction. A mechanism for this thioacetalization reaction is proposed.
Catalytic Synthesis of Butyraldehyde 1,2-Propanediol Acetal with H_3PW_(12)O_(40)/PAn

S. S. Shi

2005-01-01

Abstract:Butyraldehyde 1,2-propanediol acetal was synthesized from butyraldehyde and 1,2-propanediol in the presence of H_3PW_ 12O_ 40/PAn. The factors influencing the synthesis were discussed and the best conditions were found out. The optimum conditions are: the molar ratio of butyraldehyde to 1,2-propanediol is 1∶1.2, and the amount of catalyst used is 0.5% of feed stocks, and the reaction time is 50 min. H_3PW_ 12O_ 40/PAn is an excellent catalyst for synthesizing butyraldehyde 1,2-propanediol acetal and the yield can be up to 87.9%.
Understanding the dewatering of fermentation-based 1,3-propanediol with acetone before cyclohexanone synthesis

Guangping Zhou,Jialin Tan,Manzhi Zhu,Changlin Xie,Baizhi Yang,Hao Huang,Wanli Zhang,Shaoqu Xie

DOI: https://doi.org/10.1016/j.jiec.2024.04.034

IF: 6.76

2024-04-01

Journal of Industrial and Engineering Chemistry

Abstract:Acetone can be produced by microbial fermentation using Clostridium acetobutylicum (acetone-n-butanol-ethanol fermentation, ABE fermentation), but it provides a mixture of acetone, 1-butanol, and ethanol. N-butanol and ethanol can be used as biofuels, but high-value applications of acetone generally require upgrading. Bio-based 1,3-propanediol is more readily produced by fermentation and separated at higher titers and has been used industrially. Therefore, the coupled upgrading of the two fermentation products can provide another avenue for high-value utilization of acetone. In this paper, salting-out extraction of 1,3-propanediol with acetone was carried out, and 1,3-propanediol and acetone would spontaneously form an organic phase, thus reducing the energy consumption in the 1,3-propanediol separation process. As the double alkylation reaction of acetone with equivalent 1,3-propanediol would generate cyclohexanone, the extraction of 1,3-propanediol with acetone can provide new insight into the process intensification (removing water, salt and water concentrated in the aqueous phase) for the 1,3-propanediol separation and conversion.

engineering, chemical,chemistry, multidisciplinary
Synthesis of Ethylidene Diacetate from Dimethyl Ether, CO and H2

Dianhua Liu,Xin Huang,Lei Hu,Dingye Fang,Weiyong Ying,Dasheng Chen

DOI: https://doi.org/10.1016/s1003-9953(09)60052-9

2010-01-01

Abstract:Ethylidene diacetate was prepared by reacting dimethyl ether, acetic acid and syngas in the presence of a catalytic system comprising RhI3, PPh3 and CH3I. The effects of reaction temperature, pressure, time and the CO/H2 molar ratio on the conversion of dimethyl ether and the product selectivity were investigated under the same catalyst formulation. Results showed that a maximum conversion of dimethyl ether was obtained when a mixture consisting of 0.3 mol dimethyl ether and 120 ml acetic acid was reacted at 180 °C and 3.0 MPa for 10 h at a stirring speed of 600 rpm under a syngas flow with a CO/H2 molar ratio of 2.5, which was catalyzed by a catalyst mixture comprising 0.3 g RhI3, 6g PPh3 and1.3gCH3I. The selectivity of ethylidene diacetate increased with temperature, decreased with the CO/H2 molar ratio and exhibited a maximum with pressure.

Peparation of Diacetals of 2,2-Bis (Hydroxymethyl)-1,3-propanediol

Synthesis technology of 3-n-propyl-2, 4-dihydroxyacetophenone

Catalytic Dehydration of 2,3-Butanediol over P/Hzsm-5: Effect of Catalyst, Reaction Temperature and Reactant Configuration on Rearrangement Products

An Improved Synthesis of 2,2-Diethoxypropane by Using Triethyl Orthofomate

Preparation of 2-Ethoxypropene by Liquid Phase Pyrolysis of 2,2-Diethoxypropane

Trimerization of Aldehydes with One Α -Hydrogen Catalyzed by Sodium Hydroxide

Acetalization of Carbonyl Compounds with 2,2,4-Trimethyl-1,3-pentanedio Catalyzed by Novel Carbon Based Solid Acid Catalyst

Synthesis of 1,3-Propanediol by Cross Aldol Reaction and Hydrogenation of Formaldehyde with Acetaldehyde

Microwave Enhanced Catalytic Hydration of Acrolein to 3-Hydroxypropionaldehyde Using Simultaneous Cooling: Experimental and Theoretical Studies

Synthesis of 1,3-Diphenylacetones

Acetalization of Aldehydes (ketones) with Diols Catalyzed by Brnsted Acidic Ionic Liquids

Synthesis of 2-Methyl-1,2-diaminopropane

Preparation of 1,2-diacylbenzenes from o-hydroxyaryl ketone acylhydrazones using cross-linked poly[styrene-(iodoso diacetate)]

Synthesis of Z(E)-ethyl 3-Oxo-2-(4-phenyl-1, 3-Dithiolan-2-ylidene)butanoate and Its Condensation Reaction with Arylaldehydes

Synthesis of 2,4-Diisopropyl-5,5-dimethyl-1,3-dioxane Catalyzed by Brønsted Acidic Ionic Liquids

Synthesis Of(2e, 6E )-Octadiene-3, 7- Dimethyl-1,8- Diol-1- Acetate

Chemoselective Thioacetalization with Odorless 2-(1,3-dithian-2-ylidene)-3-oxobutanoic Acid As a 1,3-Propanedithiol Equivalent

The First Nonthiolic, Odorless 1,3-Propanedithiol Equivalent and Its Application in Thioacetalization.

Catalytic Synthesis of Butyraldehyde 1,2-Propanediol Acetal with H_3PW_(12)O_(40)/PAn

Understanding the dewatering of fermentation-based 1,3-propanediol with acetone before cyclohexanone synthesis

Synthesis of Ethylidene Diacetate from Dimethyl Ether, CO and H2