Abstract:Separation and sorting of particles (cells, beads, and droplets) is critical in a variety of biomedical applications including early disease diagnostics, therapeutics, cell tracking, and clinical research. Currently, standard microfluidic methods use 2D-chips fabricated using PDMS based soft lithography or embossing/etching materials such as Topas or glass. Often hydrodynamic flow focussing is used to spatially confine the sample flow to particular areas on the chip and so facilitate target species detection; however, 2D systems have limitations when it is necessary to make fine, micrometre scale, adjustments to flow profiles and/or the spatial position of the focused sample stream so as to match up with elements of external bulky equipment such as the laser or light paths of a spectrometer or internal fields used in electrical or acoustic actuation. These limitations can be overcome by using a 3D flow focussing method which can dynamically adjust the flow patterns within the sample chip (Figure 1a, left). For complex systems containing multiple sensor and actuation stages that are best made using hybrid construction of plug-and-play subsystems, a critical aspect of the overall functioning of the system is knowing at what points in time individual particles (e.g. cells, beads) are in the vicinity of different functional parts of the device. For high throughput and high particle densities, this becomes more difficult the larger the chip and the faster the flow. To address this, here we used a strategy of integrating several optical sensors into a hybrid device made from 3D printed and conventional soft lithography PDMS parts (Figure 1a, right), and so provide this timing data. Using these, it has then been possible to develop an automated flow-focusing and sorting microfluidic system with the flexibility and stability required for the sorting and refinement of labelled cells and beads (Figure 1b).

Sorting, Trapping, and Shifting of Microparticles with Stagnation Point Flow on an Optofluidic Chip

Design of Acoustofluidic Device for Localized Trapping

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Study on Microfluidic Inertia Focusing of Rigid Microspheres

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Optofluidic Sorting of Microparticles Using Airy Beams

Optofluidic Nanoparticles Sorting by Hydrodynamic Optical Force

Optical Control in a 3D Flow-Focusing Microfluidic Sorting System

Microparticle Manipulation Performed on a Swirl-Based Microfluidic Chip Featured by Dual-Stagnation Points

High-resolution and multi-range particle separation by microscopic vibration in an optofluidic chip.

Reconfigurable Sorting of Nanoparticles on a Thermal Tuning Silicon Based Optofluidic Chip

Size-sensitive Sorting of Microparticles Through Control of Flow Geometry

Tunable Optofluidic Sorting and Manipulation on Micro-Ring Resonators from a Statistics Perspective.

Integrated Optofluidic Micro-Pumps in Micro-Channels with Uniform Excitation of a Polarization Rotating Beam.

Coupled Photothermal Vortices for Capture, Sorting, and Transportation of Particles

Sheathless inertial focusing chip combining a spiral channel with periodic expansion structures for efficient and stable particle sorting.

Design and Performance of a Microfluidic Particle Sorting Device

Hybrid Optofluidics and Three-Dimensional Manipulation Based on Hybrid Photothermal Waveguides

Microparticle Sorting with a Virtual Optical Chip.

Microparticles Controllable Accumulation, Arrangement, and Spatial Shaping Performed by Tapered-Fiber-based Laser-Induced Convection Flow

Enhanced cell sorting and manipulation with combined optical tweezer and microfluidic chip technologies.