GUT REACTION TO ANTIGEN

W. A. Hemmings

DOI: https://doi.org/10.1016/S0140-6736(79)91287-X

IF: 202.731

1979-04-21

The Lancet

Abstract:

What problem does this paper attempt to address?

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Yanping Dang,Qin Zhang,Shuai Hu,Zhiming Ou

DOI: https://doi.org/10.1016/j.jiec.2023.12.060

IF: 6.76

2024-01-01

Journal of Industrial and Engineering Chemistry

Abstract:Microfluidics technology is trustworthy for microparticle operation as it doesn't involve destructive contact. Our research endeavors have encompassed microparticles manipulation by generating swirling flow region (SFR). Now we try to utilize swirl and flow topology to promote microfluidic chip design because serial operation is still not well enabled. Herein, a new model is proposed for a 6-microchannel microfluidic chip, which has realized active control of microparticles. The chip is capable of trapping, transferring, and enriching microparticles, and is applied for microparticles sorting. Simulation is performed to substantiate the viability of generating SFRs, and experiments are conducted on 3D-printed chips to validate the envisioned functions of the proposed microfluidic chip. Encouragingly, our experiments yield convincing outcomes, wherein microparticles are successfully trapped, transferred, and enriched in separated SFRs. With the help of a self-developed vision algorithm, the size sorting of microparticles is facilitated. Significantly, the manipulation of different microparticles can be achieved by tuning the microchannel velocities and tailoring the flow topology. This work presents a pioneering flow field structure and provides a feasible scheme for sorting microparticles, which is a noteworthy advance in swirl-based microfluidic chip applications. It is a potential mean for bio-/chemical analysis and fluidic-directed assembly of multiple microparticles.

engineering, chemical,chemistry, multidisciplinary
Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Chao Wang,Sifan Sun,Ying Chen,Zhengdong Cheng,Yuxiu Li,Lisi Jia,Pengcheng Lin,Zhi Yang,Riyang Shu

DOI: https://doi.org/10.1007/s10404-018-2035-7

2018-01-01

Microfluidics and Nanofluidics

Abstract:Focusing particles into a tight stream is usually a necessary step prior to counting, detecting and sorting them. Meanwhile, particle spacing control in microfluidic devices could also be applied in the field of accurate cell detection, material synthesis and chemical reaction. To achieve simultaneous particle focusing and spacing control, a novel microchannel composed by Dean and sheath flow section was proposed and fabricated according to the elaborated design principle with its manipulating performance in situ visualized. Using microspheres with a few microns as a template, the trajectory of the particles was discovered to follow lateral migration and reach certain equilibrium positions at the end of the designed Dean section. After being focused, the streamline was further concentrated and centralized with a controllable interparticle distance in sheath flow section. For sheath flow section, the angle between symmetrical tributaries and the mainstream channel and abrupt constriction/expansion structure of mainstream channel as important channel geometric features were investigated to minimize the focusing streamline width and optimize spacing control. An modified analytical model for sheath flow with different tributary angles was derived and proved to well describe the microsphere spacing control process.
Study on Microfluidic Inertia Focusing of Rigid Microspheres

Si-Fan SUN,Chao WANG,Ying CHEN,Zheng-Dong CHENG,Xiao-Yan CAI,En-Qi BU

2017-01-01

Journal of Engineering Thermophysics

Abstract:Using inertia effect of fluid to realize the high flux precise control of rigid particles is a novel microfluidic method, which has important applications in materials synthesis, biochemical reactions and medical diagnosis etc.In this study, we designed and fabricated an microfiuidic chip consisted of focusing units and the sheath liquid focusing structures based on the inertial focusing principle.Employing polystyrene microspheres with a diameter of 10 μm as solid particles model to study the focusing effect under certain flow conditions.The experimental results showed that when the flow rate of ethanol reached 710 μL/min, the solid microspheres began to be focusedto form a single flow pattern after flowed through the 60th focusing units.The sheath flow under certain conditions focusing on a single array of microspherescan enhance the focusing effect and controlthe spacing of the particles.The obtainedresults provide an important reference not only for the further study of the kinematic properties of rigid particles in microfluidics, but also for the development of novel microfluidic chips.
Compound Manipulation of Micro-Particles Using a Single Device:Ultrasonic Trapping, Transporting, and Rotating

Kun Jia,Keji Yang,Jian Chen,Jianxin Meng

DOI: https://doi.org/10.1121/1.4755195

2012-01-01

Abstract:Ultrasonic manipulation is widely used as a noncontact technology and recently small particles rotating on a vibrating substrate has been observed. In this report,a novel methodology which compounds the procedures of ultrasonic trapping, transporting and rotating micro-particles in fluid using a single device is investigated. Irregular micro-particles in a standing wave field experience both acoustic radiation force and torque, which drive the particles to pressure nodes and keep them in a balance posture. A prototype device has also been built according to this theory, which six phase-controlled piezoelectric transducers whose sound beam axes are arranged with an angle of 60 deg in the x-y plane are used to generate ultrasonic standing waves with arbitrary node. The transducers are divided to two groups, so the wave field can be rotated by switching between the two groups. The synthesized sound field is scanned using a needle hydrophone and 200 μm irregular SiO2 particles are used to perform the compound manipulation ability of our device. The experimental results show good agreement with the theoretical calculation and the possible reason accounting for the small deviations is also discussed. This method may provide more complex and elaborate applications in micro-assembling and cell biomechanics.
Particle Manipulations in Non-Newtonian Microfluidics: A Review.

Xinglin Lu,Chao Liu,Guoqing Hu,Xiangchun Xuan

DOI: https://doi.org/10.1016/j.jcis.2017.04.019

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:Microfluidic devices have been widely used since 1990s for diverse manipulations of particles (a general term of beads, cells, vesicles, drops, etc.) in a variety of applications. Compared to the active manipulation via an externally imposed force field, the passive manipulation of particles exploits the flow-induced intrinsic lift and/or drag to control particle motion with several advantages. Along this direction, inertial microfluidics has received tremendous interest in the past decade due to its capability to handle a large volume of samples at a high throughput. This inertial lift-based approach in Newtonian fluids, however, becomes ineffective and even fails for small particles and/or at low flow rates. Recent studies have demonstrated the potential of elastic lift in non-Newtonian fluids for manipulating particles with a much smaller size and over a much wider range of flow rates. The aim of this article is to provide an overview of the various passive manipulations, including focusing, separation, washing and stretching, of particles that have thus far been demonstrated in non-Newtonian microfluidics.
A Microfluidic Chip for Single-Cell Capture Based on Stagnation Point Flow and Boundary Effects

Long Cheng,Xiao Lv,Wenchao Zhou,Huan Li,Qiushuang Yang,Xing Chen,Yihui Wu

DOI: https://doi.org/10.3390/mi15040456

IF: 3.4

2024-03-29

Micromachines

Abstract:The capture of individual cells using microfluidic chips represents a widely adopted and efficient approach for investigating the biochemical microenvironment of singular cells. While conventional methods reliant on boundary effects pose challenges in precisely manipulating individual cells, single-cell capture grounded in the principle of stagnation point flow offers a solution to this limitation. Nevertheless, such capture mechanisms encounter inconsistency due to the instability of the flow field and stagnation point. In this study, a microfluidic device for the stable capture of single cells was designed, integrating the principle of fluid mechanics by amalgamating stagnation point flow and boundary effects. This innovative microfluidic chip transcended the limitations associated with single methodologies, leveraging the strengths of both stagnation point flow and boundary effects to achieve reliable single-cell capture. Notably, the incorporation of capture ports at the stagnation point not only harnessed boundary effects but also enhanced capture efficiency significantly, elevating it from 31.9% to 83.3%, thereby augmenting capture stability. Furthermore, computational simulations demonstrated the efficacy of the capture ports in entrapping particles of varying diameters, including 9 μm, 14 μm, and 18 μm. Experiment validation underscored the capability of this microfluidic system to capture single cells within the chip, maintaining stability even under flow rate perturbations spanning from 60 μL/min to 120 μL/min. Consequently, cells with dimensions between 8 μm and 12 μm can be reliably captured. The designed microfluidic system not only furnishes a straightforward and efficient experimental platform but also holds promise for facilitating deeper investigations into the intricate interplay between individual cells and their surrounding microenvironment.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Xianting Ding,Jian Yang,Zhijun Ma,Dandan Liu,Weiping Wang,Jianjun Ye,Ieong Wong,Matt Barnes

DOI: https://doi.org/10.1109/NEMS.2013.6559718

2013-01-01

Abstract:This paper reports a microfluidic reactor for synthesizing micro- and nano-droplets using fluid shearing instability of immiscible flow in microchannels. Three factors, flow rate between the two inputs, spout geometry and surface tension are numerically studied. Based on the simulation, a device with the optimal parameters was fabricated and tested. Both computational fluid dynamics (CFD) simulation results and experimental results suggested that this technique is capable of conveniently controlling the droplets sizes from hundreds of micrometers down to several micrometers or even nanometers. This pilot research offers a proof-of-concept demonstration using instabilities in the microchannels to synthesize large quantity of microdroplets. Although the microdroplets in this study were formed by DI water containing Tween20 and silicon oil, the design with modification could be applied for synthesis of other types of micro- and nano-droplets.
Morphologically Reconfigurable Magnetic Micropillar Arrays Using Acoustic Streaming for Particle Capture and Droplet Manipulation

Hemin Pan,Deqing Mei,Shuo Han,Xin Li,Zhuzheng Qian,Qilin Hu,Yancheng Wang

DOI: https://doi.org/10.1016/j.snb.2024.135776

IF: 9.221

2024-01-01

Sensors and Actuators B Chemical

Abstract:The accurate and efficient manipulation of particles and droplets is crucial for the fields of disease diagnosis, target drug delivery, and sample purification, specific microstructure-based particle and droplet manipulation have been widely utilized in bioassays. However, current techniques are mainly based on the fixed microstructures, which is extremely difficult to achieve dynamic modulation by adjusting microstructure morphology and excitation conditions. Herein, we present a novel particle capture and droplet manipulation methodology by using morphologically reconfigurable magnetic micropillar arrays incorporate with acoustic streaming effects, which enables reconfigurable particle capturing, cargo transportation, and droplet manipulation. The mechanism is to assemble NdFeB magnetic powders by magnetic gradient fields to form morphologically variable magnetic micropillar arrays with porous surfaces, and the localized acoustic streaming effects generated by surface acoustic waves (SAWs) enable micropillar arrays to capture nearby particles onto the surfaces or to drive perturbations in droplets in the vicinity. To demonstrate the capabilities of this technology, we have achieved the high-volume acoustofluidic particle capture and loading (0.214 MCF), targeted complex maze navigation, efficient droplets manipulation (≤ 3.96mm/s), and acoustofluidic mixing acceleration (≤ 2.5s). Therefore, this technique enables reconfigurable and versatile manipulation of particles and droplets in biomedical applications.
Control of Microparticles Through Hydrodynamic Interactions

Henry Shum,Marta Zoppello,Michael Astwood,Marco Morandotti

2024-06-08

Abstract:The controllability of passive microparticles that are advected with the fluid flow generated by an actively controlled one is studied. The particles are assumed to be suspended in a viscous fluid and well separated so that the far-field Stokes flow solutions may be used to describe their interactions. Applying concepts from geometric control theory, explicit moves characterized by a small amplitude parameter $\varepsilon$ are devised to prove that the active particle can control one or two passive particles. The leading-order (in $\varepsilon$) theoretical predictions of the particle displacements are compared with those obtained numerically and it is found that the discrepancy is small even when $\varepsilon\approx 1$. These results demonstrate the potential for a single actuated particle to perform complex micromanipulations of passive particles in a suspension.

Fluid Dynamics,Soft Condensed Matter
Efficient Manipulation of Microparticles in Bubble Streaming Flows

Cheng Wang,Shreyas V. Jalikop,Sascha Hilgenfeldt

DOI: https://doi.org/10.1063/1.3654949

2012-01-01

Biomicrofluidics

Abstract:Oscillating microbubbles of radius 20-100 mu m driven by ultrasound initiate a steady streaming flow around the bubbles. In such flows, microparticles of even smaller sizes (radius 1-5 mu m) exhibit size-dependent behaviors: particles of different sizes follow different characteristic trajectories despite density-matching. Adjusting the relative strengths of the streaming flow and a superimposed Poiseuille flow allows for a simple tuning of particle behavior, separating the trajectories of particles with a size resolution on the order of 1 mu m. Selective trapping, accumulation, and release of particles can be achieved. We show here how to design bubble microfluidic devices that use these concepts to filter, enrich, and preconcentrate particles of selected sizes, either by concentrating them in discrete clusters (localized both stream-and spanwise) or by forcing them into narrow, continuous trajectory bundles of strong spanwise localization. (C) 2012 American Institute of Physics. [doi:10.1063/1.3654949]
Sheathless inertial focusing chip combining a spiral channel with periodic expansion structures for efficient and stable particle sorting.

Yixing Gou,Shuai Zhang,Changku Sun,Peng Wang,Zheng You,Yaxiaer Yalikun,Yo Tanaka,Dahai Ren

DOI: https://doi.org/10.1021/acs.analchem.9b03692

IF: 7.4

2020-01-01

Analytical Chemistry

Abstract:Efficient and reliable manipulation of biological particles is crucial in medical diagnosis and chemical synthesis. Inertial microfluidic devices utilizing passive hydrodynamic forces in the secondary flow have drawn considerable attention for their high throughputs, low costs, and harmless particle manipulation. However, as the dominant mechanism, the inertial lift force is difficult to quantitatively analyze because of the uncertainties of its magnitude and direction. The equilibrium position of particles varies along the migration process, thus inducing the instabilities of particle separation. Herein, we present a designable inertial microfluidic chip combining a spiral channel with periodic expansion structures for the sheathless separation of particles with different sizes. The stable vortex-induced lift force arising from the periodic expansion and the Dean drag force significantly enhanced the focusing process and determined the final equilibrium position. The experimental results showed that over 99% of target particles could be isolated with the high target sample purity of 86.12%. In the biological experiment, 93.5% of the MCF-7, 89.5% of the Hela, and 88.6% of the A549 cells were steadily recovered with excellent viabilities to verify the potential of the device in dealing with biological particles over a broad range of throughputs. The device presented in this study can further serve as a lab-on-chip platform for liquid biopsy and diagnostic analysis.
Numerical Simulations of the Digital Microfluidic Manipulation of Single Microparticles

Chuanjin Lan,Souvik Pal,Zhen Li,Yanbao Ma

DOI: https://doi.org/10.1021/acs.langmuir.5b02011

IF: 3.9

2015-09-08

Langmuir

Abstract:Single-cell analysis techniques have been developed as a valuable bioanalytical tool for elucidating cellular heterogeneity at genomic, proteomic, and cellular levels. Cell manipulation is an indispensable process for single-cell analysis. Digital microfluidics (DMF) is an important platform for conducting cell manipulation and single-cell analysis in a high-throughput fashion. However, the manipulation of single cells in DMF has not been quantitatively studied so far. In this article, we investigate the interaction of a single microparticle with a liquid droplet on a flat substrate using numerical simulations. The droplet is driven by capillary force generated from the wettability gradient of the substrate. Considering the Brownian motion of microparticles, we utilize many-body dissipative particle dynamics (MDPD), an off-lattice mesoscopic simulation technique, in this numerical study. The manipulation processes (including pickup, transport, and drop-off) of a single microparticle with a liquid droplet are simulated. Parametric studies are conducted to investigate the effects on the manipulation processes from the droplet size, wettability gradient, wetting properties of the microparticle, and particle-substrate friction coefficients. The numerical results show that the pickup, transport, and drop-off processes can be precisely controlled by these parameters. On the basis of the numerical results, a trap-free delivery of a hydrophobic microparticle to a destination on the substrate is demonstrated in the numerical simulations. The numerical results not only provide a fundamental understanding of interactions among the microparticle, the droplet, and the substrate but also demonstrate a new technique for the trap-free immobilization of single hydrophobic microparticles in the DMF design. Finally, our numerical method also provides a powerful design and optimization tool for the manipulation of microparticles in DMF systems.
Controllable Synthesis of Multicompartmental Particles Using 3D Microfluidics.

Zengnan Wu,Yajing Zheng,Ling Lin,Sifeng Mao,Zenghe Li,Jin-Ming Lin

DOI: https://doi.org/10.1002/anie.201911252

2019-01-01

Angewandte Chemie

Abstract:A microfluidic assembly method based on a microfluidic chip and capillary device was developed to create multicompartmental particles. The microfluidic chip design endows the particles with regulable internal structure. By adjusting the microstructure of the chip, the diameter of the capillary, the gap length between the two microfluidic components, and the flow rates, the size of the particles and the number or the ratio of different regions within the particle could be widely varied. As a proof of concept, we have produced some complicated particles that even contain 20 compartments. Furthermore, the potential applications of the anisotropic particles are explored by encapsulating magnetic beads, fluorescent nanoparticles, and the cells into different compartments of the microparticles. We believe that this method will open new avenues for the design and application of multicompartmental particles.
Size-sensitive Sorting of Microparticles Through Control of Flow Geometry

Cheng Wang,Shreyas V. Jalikop,Sascha Hilgenfeldt

DOI: https://doi.org/10.1063/1.3610940

IF: 4

2011-01-01

Applied Physics Letters

Abstract:We demonstrate a general concept of flow manipulation in microfluidic environments, based on controlling the shape and position of flow domains in order to force switching and sorting of microparticles without moving parts or changes in design geometry. Using microbubble acoustic streaming, we show that regulation of the relative strength of streaming and a superimposed Poiseuille flow allows for size-selective trapping and releasing of particles, with particle size sensitivity much greater than what is imposed by the length scales of microfabrication. A simple criterion allows for quantitative tuning of microfluidic devices for switching and sorting of particles of desired size.
Active control of particle position by boundary slip in inertial microfluidics

Chengliang Xuan,Weiyin Liang,Bing He,Binghai Wen

DOI: https://doi.org/10.1103/PhysRevFluids.7.064201

IF: 2.895

2022-06-14

Physical Review Fluids

Abstract:Inertial microfluidics is able to focus and separate particles in microchannels based on the characteristic geometry and intrinsic hydrodynamic effect. Yet, the vertical positions of suspended particles in the microchannel cannot be manipulated in real time. In this study, we utilize the boundary slip effect to regulate the parabolic velocity distribution of fluid in the microchannel and present a scheme to actively control the vertical positions of particles in inertial microfluidics. The flow field of a microchannel with a unilateral slip boundary is equivalent to that of the microchannel widened by the relevant slip length, and the particle equilibrium positions in the two microchannels are consistent consequently. Then, we simulate the lateral migrations of three kinds of typical particles, namely, circular, elliptical, and rectangular in the microchannel. Unlike the smooth trajectories of circular particles, the motions of the elliptical and rectangular particles are accompanied by regular fluctuations and nonuniform rotations due to their noncircular geometries. The results demonstrate that the unilateral slip boundary can effectively manipulate the vertical equilibrium positions of particles. The present scheme can improve the accuracy and flexibility of particulate focusing, separating, and transport in inertial microfluidics. https://doi.org/10.1103/PhysRevFluids.7.064201 ©2022 American Physical Society

physics, fluids & plasmas
Rational Saccharide Extension by Using the Natural Product Glycosyltransferase LanGT4

D. Hoffmeister,Monika Weber,G. Dräger,K. Ichinose,C. Dürr,A. Bechthold

DOI: https://doi.org/10.1002/cbic.200300793

IF: 3.2

2004-03-05

ChemBioChem

Abstract:
Influence of the internal structure of straight microchannels on inertial transport behavior of particles

Hua Dong,Longrun Huang,Liang Zhao

DOI: https://doi.org/10.1016/j.heliyon.2024.e29577

IF: 3.776

2024-04-14

Heliyon

Abstract:The rapid advancement of Micro-Electro-Mechanical Systems (MEMS) technology has established microfluidics as a pivotal field. This technology marks the onset of a new era in various applications, including drug testing, cell culture, and disease monitoring, underscoring its extensive practicality and potential for future exploration. This research delves into the intricate behavior of particle inertial migration within microchannels, particularly focusing on the impact of different channel structures and Reynolds numbers (Re). Our studies reveal that particles in microchannels with one-sided sharp-cornered microstructures migrate towards the sharp corner at a relative position of 0.4 under low flow rates, and towards the straight wall side at a relative position of 0.8 under high flow rates. The migration pattern of equilibrium positions varies with different arrangements of sharp-corner structures, achieving stability at the channel's center only when the sharp corners are symmetrically arranged on both sides. Our investigation into the shape of microstructures indicates that sharp-cornered structures generate a more stable secondary flow compared to rectangular and semi-circular structures, preventing particle aggregation at the outlet. To address the challenges associated with handling variable cross-section geometries and solid-wall boundaries in dissipative particle dynamics methods effectively, we have developed a dissipative particle dynamics model specifically for analyzing such microchannels. Building upon our previous research, this model introduces a conservative force coefficient for particles within the microstructured region and an interaction zone that only involves repulsive forces, aligning well with experimental outcomes. Through the study of microstructures' geometric shapes, this paper offers guidance for designing microchannels for particle enrichment. Furthermore, the dissipative particle dynamics model established for the particle flow and solid structure interaction within microstructured channels provides insights into the mesoscale dynamics of liquid-solid two-phase flow and particle motion. In conclusion, this paper aims to enhance particle motion sample preparation techniques, thereby broadening the scope of microfluidic applications in the biomedical field.
Controllability and Flexibility in Particle Manufacturing of a Segmented Microfluidic Device with Passive Picoinjection

Le Du,Yang Li,Ruomei Gao,Jiabin Yin,Chun Shen,Yujun Wang,Guangsheng Luo

DOI: https://doi.org/10.1002/aic.16356

IF: 4.167

2018-01-01

AIChE Journal

Abstract:Segmented flow microfluidics has attracted considerable attention owing to the excellent controllability of reaction environment. However, the accurate and stepwise addition of other reactants into the formed droplets/slugs in segmented flow is extraordinarily challenging to achieve, especially for performing particle growth and crystallization processes. Herein, we employed a segmented flow microchannel with passive picoinjection to realize the accurate addition of reactants and continuous particle manufacturing. A Venturi junction was integrated into the microchannel to control the injection volume without external power. Rapid mixing for the preparation of BaSO4 nanoparticles with an average size of 30–40 nm, multiple injection for the growth of Au nanoparticles from 32 to 91 nm, and continuous crystallization of vaterite CaCO3 with a high crystal purity were all successfully performed in this microchannel. The feasibility of long‐term operation and large‐scale production of particles by combining with droplet splitting was also experimentally verified. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3817–3825, 2018
On-chip Manipulation of Continuous Picoliter-Volume Superparamagnetic Droplets Using a Magnetic Force

Kai Zhang,Qionglin Liang,Sai Ma,Xuan Mu,Ping Hu,Yiming Wang,Guangsheng Luo

DOI: https://doi.org/10.1039/b906229g

IF: 7.517

2009-01-01

Lab on a Chip

Abstract:A microfluidic device for generating monodisperse superparamagnetic droplets and rapidly manipulating desired droplets into designated sub-microchannels by an external magnetic force is described. Superparamagnetic magnetite (Fe3O4) nanoparticles are synthesized by a chemical co-precipitation method. They are well dispersed in the water-phase to form a superparamagnetic fluid that is sheared into picoliter-volume monodisperse superparamagnetic droplets by the oil-phase in a T-junction PDMS microchannel. Superparamagnetic droplets always flow into sub-microchannel 1 due only to laminar flow without a magnetic field. But they are deflected from the direction of laminar flow by a perpendicular magnetic field. The results show that the deflection is proportional to the magnetic field gradient and magnetic nanoparticle concentration, and it is closely related to the magnet position. The observed experimental results make a good match with theoretical analysis. Single or bulk superparamagnetic droplets are successfully manipulated into the designated sub-microchannels 2 and 3 respectively, only by changing the positions of the magnet. Relatively high efficiency is obtained with more than 10 superparamagnetic droplets precisely manipulated per second. This simple and robust apparatus has wide applications in high throughput drug delivery/screening, immunoassay, cell research and synthesis of magnetic microparticles due to good biological compatibility and monodispersity of superparamagnetic droplets.
A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.

Yongchao Cai,Zekun Li,Cuimin Sun,Xuan Zhao,Shixiong Wu,Guangyong Huang,Shengchang Tang,Peng Dai,Xiangfu Wei,Hui You,shengchang Tang

DOI: https://doi.org/10.1039/d4lc00260a

2024-07-05

Lab on a Chip - Miniaturisation for Chemistry and Biology

Abstract:Droplet sorting and enrichment, as a prominent field within microfluidic technology, represent a pivotal stage in the manipulation of droplets and particles. In recent times, droplet sorting methods based on lab-on-disk (LOD) have garnered significant interest among researchers for their inherent merits, including high throughput, ease of operation, seamless device integration, and independence from supplementary driving forces. This study introduces a centrifugal force-driven microfluidic chip comprising spiral microchannels. The chip incorporates microhole arrays along the sidewall of the spiral channels, enabling size-based sorting and enrichment of microdroplets under the influence of multiple forces. Firstly, a comparative analysis was performed to assess the influence of the separation port structure and rotational speed on efficiency, and a mechanical modeling approach was employed to conduct kinetic analyses of droplet behavior during instantaneous separation. Those findings demonstrated a good agreement with the experimental results at ω <100 rpm. Subsequently, sorting experiments on homogeneous droplets indicated that repetitive sorting could increase the recovery ratios, RT(α), of high-concentration droplets (20.7%) from 35.3% to over 80%. We also conducted a sorting experiment on three-component homogeneous-phase emulsions using a serially connected chip array, and the sorting throughput was 0.58 mL/min. As a result, the RT(α) for 60 and 160 μm droplets were 99.4% and 88.9%, respectively. Lastly, we conducted elution experiments and dualsample sorting on a single chip, and the fluorescence results demonstrated that this study provided an efficient and non-cross-contaminating sorting method for non-homogenous phase multi-sample microreactor units.

GUT REACTION TO ANTIGEN

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Study on Microfluidic Inertia Focusing of Rigid Microspheres

Compound Manipulation of Micro-Particles Using a Single Device:Ultrasonic Trapping, Transporting, and Rotating

Particle Manipulations in Non-Newtonian Microfluidics: A Review.

A Microfluidic Chip for Single-Cell Capture Based on Stagnation Point Flow and Boundary Effects

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Morphologically Reconfigurable Magnetic Micropillar Arrays Using Acoustic Streaming for Particle Capture and Droplet Manipulation

Control of Microparticles Through Hydrodynamic Interactions

Efficient Manipulation of Microparticles in Bubble Streaming Flows

Sheathless inertial focusing chip combining a spiral channel with periodic expansion structures for efficient and stable particle sorting.

Numerical Simulations of the Digital Microfluidic Manipulation of Single Microparticles

Controllable Synthesis of Multicompartmental Particles Using 3D Microfluidics.

Size-sensitive Sorting of Microparticles Through Control of Flow Geometry

Active control of particle position by boundary slip in inertial microfluidics

Rational Saccharide Extension by Using the Natural Product Glycosyltransferase LanGT4

Influence of the internal structure of straight microchannels on inertial transport behavior of particles

Controllability and Flexibility in Particle Manufacturing of a Segmented Microfluidic Device with Passive Picoinjection

On-chip Manipulation of Continuous Picoliter-Volume Superparamagnetic Droplets Using a Magnetic Force

A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.