Abstract:To explore the influence of the interface properties between fiber/cement matrix on the performance of fiber‐modified cement‐based composite. Polyethylene (PE) and polyvinyl alcohol fiber (PVA) are brought in the cement‐based materials to prepare mortar and Engineered Cementitious Composite (ECC) samples. The mortar's mechanical, and ECC's tensile capacity, four‐point bending and porosity were tested to verify the interface's influence on samples' performance. Furthermore, the water contact angle was used to analyze the wettability of the fiber, and a scanning electron microscope (SEM) was used to observe the fiber/matrix interface on the microscopic scale. Molecular dynamics simulation was performed to calculate the interfacial paraments from an atomic scale. The results shows that fiber increases the toughness of the mortar and improved its flexural strength. Through SEM, it was found that PVA fiber can form tight adsorption with the hydration matrix. While there are many apparent cracks and pores at the PE/matrix interface, the poor bonding destroys the matrix's structure and reduces its compressive strength. By analyzing the performance of ECC samples, it was known that PVA‐ECC's strain rate can reach 5.73%, while PE‐ECC is 4.20%. PE fiber has higher mechanical strength and can bear more loads, it helps PE‐ECC to obtain a greater modulus of rapture. Nuclear magnetic resonance results showed that the porosity of PVA‐ECC is lower than PE‐ECC. The ability of PE‐ECC to resist external interference is weak, and the interface of PE/matrix is easily damaged. Molecule dynamics simulation results indicated the adsorption energy between PVA/CSH is 6.17 times that of PE/CSH. The PVA/C‐S‐H interface tends to form CaO and H‐bonds to strengthen the bonding, the bonding has limited the movement of atoms and making the PVA chains tightly adsorbed on the CSH surface. While the adsorption between PE and CSH is weak, the PE will detach from the CSH surface and form aggregates. Moreover, PVA and water molecules form a stable hydrogen bond network to promote the hydration production grows on the surface of PVA fiber. However, PE fiber is complex enough to adsorb water molecules and hardly encourage the development of pores at the interface. By analyzing the properties of the interface between different fibers and cement matrix can provide insights for strengthening the interface properties of fiber cement matrix, and then improve the properties of fiber cement‐based composites.

On Use of Polyvinylpyrrolidone to Modify Polyethylene Fibers for Improving Tensile Properties of High Strength ECC

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Research Progress and Performance Evaluation of Polyvinyl Alcohol Fiber Engineered Cementitious Composites

Effect of Modified PE Fiber Grafted with Nano-Sio2 on the Tensile Properties of High-Strength Engineering Cementitious Composites

Effect of PE fiber coated by polydopamine and nano-SiO2 on the strain hardening behavior of ultra-high-strength and high-ductility cementitious composites

Enhancement of Durability of Glass Fiber-Reinforced Cement with PVA

Tensile Properties of PVA and PE Fiber Reinforced Engineered Cementitious Composites Containing Coarse Silica Sand

Effect of EVA Polymer and PVA Fiber on the Mechanical Properties of Ultra-High Performance Engineered Cementitious Composites

Effect of interfacial properties between polyethylene and polyvinyl alcohol fiber/cement matrix on properties of mortar and ECC

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Enhancing Mechanical Properties and Crack Resistance of High-strength SHCC/ECC for Durable Transportation Through Ethylene-Vinyl Acetate Polymer Modification

Enhancing fracture toughness of carbon fiber/epoxy composites using polyphenylene ether as a modifier

Micromechanics Theory Guidelines and Method Exploration for Surface Treatment of PVA Fibers Used in High-Ductility Cementitious Composites

Tensile performance of engineering fiber reinforced cementitious composites PVA-ECC under uniaxial tension

Optimization of mix proportion and experimental analysis of mechanical properties of hybrid PVA-ECC

An Investigation on the Performance Enhancement and Cost Reduction of Engineered Cementitious Composites Developed with Local PVA and PET Fibers

Matrix Tailoring of Engineered Cementitious Composites (ECC) with Non-Oil-coated, Low Tensile Strength PVA Fiber

Cooperative effect of hybrid polyethylene-basalt fibers on crack width control and mechanical properties in ECC

Effects of Mix Proportion and Curing Condition on Mechanical Properties of Polyvinyl Alcohol Fibre ECC

Mechanical characterization of high-strength and ultra-high-performance engineered cementitious composites reinforced with polyvinyl alcohol and polyethylene fibers subjected to monotonic and cyclic loading