Abstract:The laser welding of dissimilar 2219 Al–Cu and 2195 Al–Li alloys is a significant attempt in the fabrication of rocket propellant tanks, aiming at the escalating demands for weight reduction and cost efficiency. The variances in microstructure evolution for 2219/2195 aluminum alloys laser welded joint deserves thorough investigation because it certainly results in the discrepancies in mechanical property In this paper, the temperature field, microstructure, element distribution, grain orientation, and texture on both sides of the laser welded joint were comprehensively investigated through a combination of simulations and experiments. The tensile strength was tested and the fracture mechanism was analyzed based on the microstructure characteristic. It is found that the wider columnar dendrites zone is generated due to the large temperature gradient from on the 2195 Al–Li alloy side. The grain orientation of the non-dendrite equiaxed zone (EQZ) and columnar grain near the fusion line are significantly influenced by the grain orientation of base metal (BM). On the one side of 2195 Al–Li alloy, the majority of grains feature diameters predominantly within the 3–6 μm range. The region in the vicinity of fusion line on one side of the 2195 Al–Li alloy has the weakest performance. It is deduced that the poor tensile property on one side of the 2195 Al–Li alloy is not only attributed to the loss of Mg and Li elements, but also owing to the evolution of texture. The rotated goss texture with high intensity is formed in EQZ near the fusion line on one side of 2219 Al–Cu alloy.

Crack Generation and Propagation Mechanism of Mo 14re Alloy Laser Welding

Mechanism of Pore Evolution in Electron Beam Welding Joints of Mo-14Re Alloy

Microstructure transformation and pore formation mechanism of Mo-14Re alloy weld by vacuum electron beam welding

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Mechanism of the Crack Formation and Suppression in Laser-Mag Hybrid Welded 30crmnsia Joints

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting

Microstructure Characterization and Failure Mechanism of Laser Welded Nuclear-grade FeCrAl Alloy

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys

Phase Evolution and Solidification Cracking Sensibility in Laser Remelting Treatment of the Plasma-Sprayed CrMnFeCoNi High Entropy Alloy Coating

Microstructures of the Pulsed Laser Welded TiZrBeCuMo Composite Amorphous Alloy Joint

On the laser gas (N<sub>2</sub>) alloying in the welding of molybdenum alloy

Effect of process parameters on crack characteristics in laser welding of Al2O3 ceramic

Liquefaction Characteristics and Cracking Behavior of the Grain Boundaries and Interdendritic Regions in Non-Weldable K447A Superalloy During Laser Re-Melting

Research about the Microcrack Mechanisms in Molybdenum and Corresponding Suppression Strategies During Laser Additive Manufacturing Process

Crack Characteristics Analysis and Mechanisms in GH3536 Alloy Manufactured by Laser Powder Bed Fusion

Interfacial Microstructure and Fracture Behavior of Laser Welded–brazed Mg Alloys to Zn-coated Steel

Analysis of crack tip transformation zone in austenitic stainless steel laser-MIG hybrid welded joint

Crack generation mechanism and control method of electron beam welded Nb/GH3128 joint

Weldability of Molybdenum–Rhenium Alloy Based on a Single-Mode Fiber Laser

X-ray phase contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy.