Abstract:Post-heat treatment is commonly employed to improve the microstructural homogeneity and enhance the mechanical properties of the additively manufactured metallic materials. In this work, a ternary (NiTi)91Nb9 (at.%) shape memory alloy was fabricated by laser powder bed fusion (L-PBF) using pre-alloyed NiTi and elemental Nb powders. The influence of solution treatment on the microstructure, phase transformation behaviour and mechanical/functional properties was investigated. The in-situ alloyed (NiTi)91Nb9 alloy exhibits a submicron cellular-dendritic structure surrounding the supersaturated B2-NiTi matrix. Upon high-temperature (1273K) solution treatment, Nb-rich precipitates are precipitated from the supersaturated matrix. The fragmentation and spheroidization of the NiTi/Nb eutectics occur during solution treatment, leading to a morphological transition from mesh-like into rod-like and sphere-like. Coarsening of the β-Nb phases occurs with increasing holding time. The martensite transformation temperature increases after solution treatment, mainly attributed to (i) reduced lattice distortion caused by the expulsion of Nb from the supersaturated matrix and (ii) the expulsion of Ti from the β-Nb phases that lowers the Ni/Ti ratio of the matrix, which resulted from the microstructure changes from non-equilibrium to equilibrium state. The thermal hysteresis of the solutionized alloys is around 145 K after 20% pre-deformation, which is comparable to the conventional NiTiNb alloys. A short-term solution treatment (i.e., at 1273K for 30 min) improves the strength and ductility of the as-printed alloy, with the fracture stress increases from 613±19 MPa to 781±20MPa and the fracture strain increases from 7.6±0.1% to 9.5±0.4%. Both the as-printed and solutionized samples exhibit good shape memory effects with shape recovery rates >90%.

Site-specifically Controlling Phase Transformation Path in Ni2MnGa Shape Memory Alloy Through Ion Irradiation

Site-specifically controlling phase transformation path in Ni 2 MnGa shape memory alloy through ion irradiation

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Effect of electron irradiation defects on the martensitic transformation characteristics and microstructure of Ni45Co5Mn37In13 alloys

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Irradiation effect of TiNi based shape memory alloys

Phase Transformation of Tini Shape Memory Alloy under Electron Irradiation

Banded-like Morphology and Martensitic Transformation of Dual-Phase Ni–Mn–In Magnetic Shape Memory Alloy with Enhanced Ductility

Influence of Gamma Phase on the Martensitic Transformation and Shape Memory Effect of Co-Ni-Ga Ferromagnetic Shape Memory Alloy

Tailoring the Microstructure, Phase Transition Characteristics and One-Way Shape Memory Effect of Ni-Mn-Ga Alloys by Dual Treatment of Annealing and Directional Solidification

Optimization of Automated Crystal Orientation and Phase Mapping in TEM Applied to Ni-Ti All Round Shape Memory Alloy

Irradiation Engineered Lattice Distortion in Ti-Ni Shape Memory Alloy Achieving Enhanced Elastocaloric Effect

Martensitic Transformation and Shape Memory Effect in Ni54.75Mn13.25Fe7Ga25 Ferromagnetic Shape Memory Alloy

In-Situ High-Energy X-Ray Diffuse-Scattering Study of the Phase Transition in a Ni2MnGa Ferromagnetic Shape-Memory Crystal

Manipulation of microstructure evolution and deformation behavior in Ni–Mn–Ga shape memory alloys with varied Ni/Ga under uniaxial cyclic compression

Two Types of Martensitic Phase Transformations in Magnetic Shape Memory Alloys by In-Situ Nanoindentation Studies

Phase field simulation of grain size effects in nanograined Ti-Nb shape memory alloys

Proton-irradiation-induced Structural and Magnetic Property Changes in Ni–Mn–Ga High-Temperature Shape Memory Films

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties