Abstract:The material accumulation during roasting in the practical production causes the hypoxia of the internal materials, leading to the relatively lower vanadium recovery than that in theoretical studies. This work aims to solve the problem of material hypoxia through the Na2O2-briquetting roasting route. The vanadium slag and Na2O2 powders were mixed, briquetted, and roasted at various parameters. The generated phases and their distributions were analyzed using X-ray diffraction, Fourier transform infrared spectroscopy, and electron probe microanalysis. The analyzing results showed that Fe2O3, Fe3O4, Mg0.165Mn0.835O, CaTiO3, and Na3VO4 were generated during roasting. The solid–solid reaction between V2O5 and Na2O was described using the vacancy-mediated diffusion mechanism. Na+ (or V5+), in the Na2O (or V2O5) layer, jumped and diffused through the Na+ (or V5+) vacancies (in the Na3VO4 layer) to the Na3VO4/V2O5 (or Na3VO4/Na2O) interface. Na+ (or V5+) reacted with V2O5 (or Na2O) and O2 decomposed from Na2O2 or transported from the air to generate Na3VO4. The roasted mixture was leached in an aqueous solution to study the effects of the roasting variables on the vanadium leaching recovery. The vanadium leaching recovery was very sensitive to the roasting variables, it showed very complicated relationships with the Na/V molar ratio, temperature, time, and briquetting pressure. The maximum vanadium leaching recovery of 95.57 pct was achieved when the Na/V molar ratio, temperature, time, and pressure were optimized as 3/1, 850 °C, 2.5 hours, and 5 MPa, respectively. The leaching solution containing vanadium was processed via precipitation and calcination to gather vanadium. The obtained compound was identified as V2O5 with a purity of 96.84 pct, based on the high consistency of diffraction peaks between the present work and that of the joint committee on powder diffraction standards.

Leaching Kinetics of Vanadium from Calcification Roasted Vanadium Slag in (NH4)2CO3

Vanadium Leaching Kinetics from Calcification-Roasted Vanadium Slag in Ammonium Carbonate

Process and Kinetic Assessment of Vanadium Extraction from Vanadium Slag Using Calcification Roasting and Sodium Carbonate Leaching

Leaching Kinetics of Vanadium from Calcium-Roasting High-Chromium Vanadium Slag Enhanced by Electric Field

Efficient Recovery of Vanadium from High-Chromium Vanadium Slag with Calcium-Roasting Acidic Leaching

A new process for extracting vanadium by direct calcification using the heat of molten vanadium slag

Clean and efficient extraction of vanadium from vanadium slag: Effect of manganese on the phase composition and vanadium extraction process

A Comparative Study of Extracting Vanadium from Vanadium Titano-Magnetite Ores: Calcium Salt Roasting Vs Sodium Salt Roasting

Efficiency and mechanism of vanadium extraction from vanadium-bearing metallurgical waste slag by using self-heating acid curing and normal temperature water leaching

Extraction of vanadium from vanadium slag by sodium roasting-ammonium sulfate leaching and removal of impurities from weakly alkaline leach solution

Selective recovery of vanadium from high-chromium vanadium slag by a mechanically activated low-sodium salt roasting-water leaching process

Vanadium extraction from water-cooled vanadium converter slag via salt-free roasting and acid leaching

Non-salt roasting mechanism of V–Cr slag toward efficient selective extraction of vanadium

Review of leaching, separation and recovery of vanadium from roasted products of vanadium slag

Effect of chromium content on the phase composition, crystallization and components extraction of vanadium slag

Extraction of Vanadium From Vanadium Slag Through a New Technique Route Including Na2O2-Briquetting Roasting Process

Extraction of Vanadium from High Phosphorus Vanadium Containing Waste Residue via Carbonation: Optimization Using Response Surface Methodology

Effect of CaO on the Phase Evolution of Vanadium Slag during Crystallization and Roasting–Leaching Processes for Selective Extraction of Vanadium

Evaluation of Variables Determining Leaching Efficiency in Vanadium Extraction Using Alkali Roasting

Observations and simulations for separation mechanism of vanadium and chromium: progressive study based on oxides, spinels and vanadium-chromium slag

Two-stage cyclic ammonium sulfate roasting and leaching of extracting vanadium and titanium from vanadium slag