Abstract:Friction stir welding (FSW) has been applied to many fields including aerospace manufacturing and the railway industry. However, the interfacial friction behavior remains unclear due to the lack of reliable thermo-mechanical-flow-coupled analysis. In this study, the frictional behaviors, including the interfacial temperature, friction-induced heat generation, interfacial stick-slip state, and mass transfer during the FSW process of AA2024-T4 are elucidated based on experimental investigation and a novel three-dimensional computational fluid dynamics (CFD) analysis. It is found that the temperature is heterogeneously distributed at the tool-workpiece interface which ranges from 380 to 431 degrees C. The heat generation contributed by the slipping friction is less than that contributed by deformation heating. This stems from the fact that friction-induced interfacial stick is presented over a large area of the tool-workpiece interface, while a significant slip occurs at the shoulder periphery and the middle of the pin end. As a result of the interfacial stick, a highly-localized high-velocity zone (HVZ) is formed within the vicinity of the tool-workpiece interface with nonnegligible vertical velocity. Fast mass transfer occurs within the HVZ in a maelstrom pattern; while relative slow mass transfer occurs in a straight-through pattern outside the HVZ. Moreover, the friction-induced temperature field and material flow field in the vicinity of the tool-workpiece interface during the FSW process are predicted by using numerical simulation and validated by the measured temperature and the observed weld macrograph. By using the state-of-the-art simulation approaches, this study provides a quantitative analysis of the friction behavior during FSW, which benefits an in-depth understanding of FSW and thus brings new design concepts.

Simulation of Temperature Field and Optimization of Welding Parameters in Friction Stir Welding Thick Large Circular Storage Tank

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

Temperature Field Measurement and Analyses of Friction Stir Welding of 18mm Thick 2219 Aluminum Alloy

A study on temperature field and process of FSW thick 2219 aluminum alloy plate

Simulation of Temperature Field in FSW of 6061T6 Aluminum Alloy IGBT Liquid Cooled Radiator Panel

Predicting axial force in friction stir welding thick 2219 aluminum alloy plate

Temperature distribution and mechanical properties of FSW medium thickness aluminum alloy 2219

Computational Fluid Dynamics Studies on Heat Generation During Friction Stir Welding of Aluminum Alloy

NUMERICAL ANALYSIS OF IN-PROCESS HEAT TRANSFER AND MATERIAL FLOW DURING DISSIMILAR FRICTION STIR WELDING PROCESS

Numerical Analysis of Multi-Field Coupled Phenomena in Friction Stir Welding and Applications

Recent development and applications of CFD simulation for friction stir welding

Numerical Simulation and Experimental Characterization of Friction Stir Welding on Thick Aluminum Alloy Aa2139-T8 Plates

Computational Fluid Dynamics Modeling on Steady-State Friction Stir Welding of Aluminum Alloy 6061 to TRIP Steel

Flow-coupled Thermo-Mechanical Analysis of Frictional Behaviors at the Tool-Workpiece Interface During Friction Stir Welding

Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions

Entire Process Simulation of Friction Stir Welding — Part 1: Experiments and Simulation

Numerical simulation and experimental research on friction stir welding of 2024-T3 aeronautical aluminum alloy

Numerical Simulation of Friction Stir Welding of Dissimilar Al/Mg Alloys Using Coupled Level Set and Volume of Fluid Method

Simulation of Material Flow Behavior during Friction Stir Welding of 7075 Aluminum Alloy

Temperature-dependent friction coefficient and its effect on modeling friction stir welding for aluminum alloys

Multi-phase modelling of heat and mass transfer during Ti/Al dissimilar friction stir welding process