Dynamic responses of concrete-filled steel tubes impacted horizontally by a rigid vehicle: Experimental study and numerical modelling
Shuhong Lin,Bing Zhang,Sumei Zhang,Yijie Zhang,Xiamin Hu
DOI: https://doi.org/10.1016/j.tws.2024.111826
IF: 5.881
2024-04-01
Thin-Walled Structures
Abstract:Concrete-filled steel tubes (CFSTs), composed of an outer tube made of steel as the confining material and an inner concrete core, have been popularly utilised as high-rise building columns and urban bridge piers owing to their superior structural behaviour. Since the invention of CFSTs, their mechanical performance under static and seismic loading conditions have been extensively studied, while the investigation on their dynamic behaviour under impact loading is relatively limited. Of these limited studies about CFSTs under impact loading conditions, most experiments were completed using a drop-hammer testing facility or a pendulum-hammer testing device. Against this background, this study investigated six large CFSTs being impacted horizontally by a rigid vehicle to analysis their dynamic response. All specimens were vertically placed with the bottom pedestal fixed on the lab floor and the top end free. The main parameters of these CFSTs included the impact velocity (i.e., vi = 3.16–7.18 m/s), the CFST section size (i.e., D = 180–300 mm), as well as the CFST column height (i.e., hc = 1500–2100 mm). Test results revealed that, (1) all CFSTs experienced a bending-dominant failure when impacted horizontally by a rigid vehicle; (2) the impact velocity had a positive correlative trend with the peak impact force Fpeak and the peak lateral displacement δpeak of the CFST column; (3) a larger section size of the CFST column resulted in a higher flexural stiffness and a larger flexural capacity, thus leading to a higher Fpeak , a smaller time duration T and a smaller δpeak ; (4) the column height would affect the inertial response of the CFST column; a larger column height led to a larger Fpeak caused by the larger inertia effect of the CFST segment above the impact point. Finite-element model was established on the platform of LS-DYNA to simulate these CFSTs under horizontal impact loading, which was able to predict both impact force–time history curves and lateral displacement–time history curves with reasonably accuracy.
engineering, mechanical,mechanics, civil