Abstract:The development of high temperature proton exchange membranes (HT-PEMs) is crucial for the advancement of high temperature proton exchange membrane fuel cells (HT-PEMFCs). The conventional use of phosphoric acid (PA) doped polybenzimidazole (PBI) membranes in HT-PEMFCs is associated with challenges such as a demanding synthetic procedure and the need for carcinogenic monomer. Therefore, the quest for cost-effective and readily synthesizable HT-PEMs with satisfactory physicochemical properties and commendable fuel cell performance is of great importance. In this work, a series of pyridine-containing aromatic copolymers are synthesized using a straightforward Friedel-Crafts hydroxyalkylation reactions. Five different aryl derivates including biphenyl, m -terphenyl, dibenzo-18-crown-6, 9,9-dimethylfluorene, 1,2-diphenylethane are adopted as the comonomers along with p -terphenyl to copolymerize with 4-acetylpyridine. Thus, the effects of different backbone structures with rigid, flexible or bulky moieties on the resulting membrane properties is investigated systematically. The PA absorption capacity and conductivity of the copolymer membranes increases, attributed to the introduction of twisted, hydrophilic or bulky moieties in the copolymer structures. One of the membranes, the P(TP-co-DMF) membrane with 9,9-dimethylfluorene groups, achieves a good PA uptake of 194% when immersed in 85 wt% PA at 30 degrees C, which also exhibits a moderate tensile strength of 6.5 MPa and a high conductivity of 0.075 S cm -1 at 180 degrees C. Consequently, when tested in the H 2 - O 2 fuel cell under 180 degrees C and no backpressure condition, the P(TP-co-DMF)/194%PA membrane delivers a high peak power density of 947 mW cm -2 . This performance highlights the significant potential of these copolymers for application in HT-PEMFCs.

The Influence of Comonomer Structure on Properties of Poly(aromatic Pyridine) Copolymer Membranes for HT-PEMFCs

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Novel High Temperature Proton Exchange Membranes Based on Functionalized Poly(arylene Dimethylamino Benzene) Polymers

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers

Tetramethyl poly(aryl ether ketone) modified by DABCO cationic polymer for high temperature proton exchange membrane fuel cells

Side-chain vertical imidazole backbone enhances phosphoric acid uptake in Poly(2,5-benzimidazole) membranes for high-temperature PEMFCs

Proton Exchange Membrane from Tetrazole-Based Poly (phthalazinone Ether Sulfone Ketone) for High-Temperature Fuel Cells

Tröger's base polymer blended with poly(ether ketone cardo) for high temperature proton exchange membrane fuel cell applications

Ionically Crosslinked Composite Membranes from Polybenzimidazole and Sulfonated Poly (fluorenyl ether ketone) for High-Temperature PEM Fuel Cells

Bipyridine polybenzimidazole ionomer with optimized electrochemical boundaries enhanced power density of high-temperature proton exchange membrane fuel cells by 2.5 times

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

High-performance polybenzimidazole composite membranes doped with nitrogen-rich porous nanosheets for high-temperature fuel cells

A novel anion exchange membrane of three aromatic units copolymer for fuel cells

Composite Membranes Consisting of Acidic Carboxyl Containing Polyimide and Basic Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells

High conductivity poly( meta -terphenyl alkylene)s proton exchange membranes for high temperature fuel cell