Abstract:On account of some special advantages of interpenetrating polymer networks (IPNs), the preparation of IPNs with excellent properties may be a promising way to strengthen the polyurethanes (PUs) and toughen the glycidyl azide polymer (GAP) based polytriazoles (PTAs). This work provides the effect of composition and number average molecular weight (Mn) of GAP on the mechanical properties and morphology of full‐IPNs. A series of IPNs based on the crosslinked Ace‐terminated GAP (Ace‐GAP) as polytriazole phase and crosslinked hydroxy‐terminated liquid fluorinated polymer (HTLF‐1500) as polyurethane phase (namely, GAP‐HTLF‐X full‐IPNs) were successfully fabricated via in situ polymerization without any catalysts at 80°C by azide–alkynyl click chemistry and hydroxyl‐isocyanate urethane reaction. These IPNs were characterized using attenuated total reflectance/Fourier‐transform infrared spectroscopy (ATR/FTIR), uniaxial tensile testing, swelling measurement, and scanning electron microscopy (SEM). The tensile strength of GAP‐HTLF full‐IPNs gradually increased by increasing the weight ratio of Ace‐GAP, but the breaking elongation dramatically decreased compared with elongation at break of HTLF polyurethane. In addition, a small Mn of GAP is beneficial in enhancing the tensile strength, elongation at break and toughness of the IPNs. However, a small Mn of GAP corresponds to increased difficulty of preparing GAP‐HTLF full‐IPNs. GAP1k‐HTLF full‐IPN was not successfully prepared. When the Mn of GAP was 2000 g/mol, the GAP2k‐HTLF‐80 full‐IPN exhibited prominent mechanical performance with a tensile strength of 83.1 MPa, elongation at break of 28.5% and fracture energy of 99.1 kJ/m3. Swelling measurement showed that when the weight ratio of GAP with larger Mn (5, 3, and 2 k) increased to more than 70%, the molecular interpenetration existed in the IPNs, demonstrating the presence of additional physical crosslinks and entanglement for full‐IPNs. SEM studies revealed that highly formed interpenetration and few microphase separations can be observed on the fracture surface of the IPNs with optimal mechanical properties. Combined with the results of mechanical properties, swelling measurement, and SEM studies, the degree of molecular interpenetration and microphase separation were beneficial to improve the mechanical properties of elastomers. This work can provide a certain guiding significance for the preparation of IPN with excellent properties.

Synthesis and Characterization of Epoxy Resin-Polydicyclopentadiene Interpenetrating Polymer Networks by Uv-Initiated Synchronously Frontal Polymerization

Synthesis and characterization of epoxy resin‐polydicyclopentadiene interpenetrating polymer networks by UV‐initiated simultaneously frontal polymerization

Interpenetrating polymer networks from the novel bismaleimide and cyanate containing naphthalene: Cure and thermal characteristics

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Properties of the Glass Fibre/interpenetrating Polymer Network Composites Based on Novel Naphthalene-Contained Bismaleimide and Cyanate Resin

Simultaneous Interpenetrating Polymer Networks of Polyurethane from Pentaerythritol–Modified Castor Oil and Polystyrene: Structure–Property Relationships

Preparation and properties of an interpenetrating network polymer based on polydicyclopentadiene and phenolic resin

On the synergism of interpenetrating polymer networks of PU/EP

Nanostructured Epoxy Thermosets Containing Poly(Vinylidene Fluoride): Preparation, Morphologies, and Dielectric Properties

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Enhanced mechanical and adhesive properties of PDMS based on novel PDMS-epoxy IPN structure

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Thermal, Mechanical, and Morphological Properties of Soybean Oil-Based Polyurethane/epoxy Resin Interpenetrating Polymer Networks (Ipns)

Damping and mechanical properties of polyol cross-linked polyurethane/epoxy interpenetrating polymer networks

Evaluation of Effective Crosslinking Density for Pseudo-Semi Interpenetrating Polymer Networks Based on Polyether Glycols Mixture by Dynamic Mechanical Analysis

Reactive blend of epoxy-novolac resin and epoxide-terminated low-molecular-weight poly(phenylene oxide)

Interpenetrating Thermophobic and Thermophilic Dual Responsive Networks

Preparation and Performance Study of Polyurethane/Epoxy Resin Interpenetrating Networks with Self‐healing, Shape Memory, and High Damping Properties

Interpenetrating polymer networks of polyurethane and polytriazole: Effect of the composition and number average molecular weight of glycidyl azide polymer on the mechanical properties and morphology

Synthesis and characterization of crosslinkable latex with interpenetrating network structure based on polystyrene and polyacrylate